diff --git a/README.md b/README.md
index 4f75328..8e48de7 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,12 @@
 # SawahKita-IoT
+
+<img alt="showcase" src="IMG_20230702_132309.jpg" width="640" height="360">
+
 SawahKita IoT Project
 
 This is the updated version of Sawahku. I said that this is the updated version but actually it is entierly different things. The sensor is different, the program is different, even the MCU is different.
 
 Some of the feature currently not available like store data to the eeprom, RTC, calculate fuzzy, etc. But most of the basic function is still usable.
+
+tested board :
+esp8266
\ No newline at end of file
diff --git a/SawahKita.ino b/SawahKita.ino
index 0b26af8..73f2c13 100644
--- a/SawahKita.ino
+++ b/SawahKita.ino
@@ -1,4 +1,4 @@
-//SawahKita by ZakyLeo
+// SawahKita by ZakyLeo
 #include <Arduino.h>
 #include <Adafruit_ADS1X15.h>
 #include <AdvKeyPad.h>
@@ -26,8 +26,8 @@ D7 13 = Ketinggian Air R
 D8 15 = (only out)
 */
 
-//Data Fuzzy daily disimpan ke SD card
-//Tambahin RTC DS3231
+// Data Fuzzy daily disimpan ke SD card
+// Tambahin RTC DS3231
 
 OneWire oneWire(14);
 Adafruit_ADS1115 ads;
@@ -45,17 +45,19 @@ String nextion;
 unsigned long before = 0, beforeget = 0, beforepre = 0;
 
 float TAir, ATAir, BTAir;
-float volt, ampere, avgampere; int arsample;
+float volt, ampere, avgampere;
+int arsample;
 String sumur, sharga, sluas, spupuk, dis;
 int umur, harga, luas, pupuk, hasil, total, con, page, predict;
 
 String send_data, send_data2, send_data3, pompauser, pompa, pompanex, nexid,
-link="Sawahkitafirebasedb/PaTani.json",
-lin1="Sawahkitafirebasedb/Sawah2/pompauser.json",
-lin2="Sawahkitafirebasedb/power.json",
-lin3="Sawahkitafirebasedb/prediksi.json";
+    link = "Sawahkitafirebasedb/PaTani.json",
+    lin1 = "Sawahkitafirebasedb/Sawah2/pompauser.json",
+    lin2 = "Sawahkitafirebasedb/power.json",
+    lin3 = "Sawahkitafirebasedb/prediksi.json";
 
-void setup() {
+void setup()
+{
   Serial.begin(57600);
   EEPROM.begin(512);
   pinMode(0, OUTPUT);
@@ -64,21 +66,22 @@ void setup() {
   digitalWrite(2, HIGH);
   WiFi.mode(WIFI_STA);
   WiFi.begin(ssid, pass);
-  
-  while (WiFi.status() != WL_CONNECTED) {
+
+  while (WiFi.status() != WL_CONNECTED)
+  {
     Serial.print("wp0.pic=");
     Serial.print(4);
     Serial.write(0xff);
     Serial.write(0xff);
     Serial.write(0xff);
-    
+
     Serial.print("wifi.txt=\"");
     Serial.print("menghubungkan");
     Serial.print("\"");
     Serial.write(0xff);
     Serial.write(0xff);
     Serial.write(0xff);
-    
+
     Serial.print(".");
     delay(500);
   }
@@ -87,19 +90,23 @@ void setup() {
   Serial.write(0xff);
   Serial.write(0xff);
   Serial.write(0xff);
-  
+
   Serial.println(" ");
-  
+
   Wire.begin();
   Wire.setClock(400000);
   tempsensor.begin();
-  if (keyPad.begin() == false){
+  if (keyPad.begin()!)
+  {
     Serial.println("\nERROR: cannot communicate to keypad.\nPlease reboot.\n");
-    while(1);
+    while (1)
+      ;
   }
-  if (!ads.begin()) {
+  if (!ads.begin())
+  {
     Serial.println("Failed to initialize ADS.");
-    while (1);
+    while (1)
+      ;
   }
 
   umur = 0;
@@ -114,15 +121,17 @@ void setup() {
   sharga = harga;
   sluas = luas;
   spupuk = pupuk;*/
-  
-  con=0;
-  page=0;
-  pompauser="false";
+
+  con = 0;
+  page = 0;
+  pompauser = "false";
   printWiFiStatus();
 }
 
-void printWiFiStatus() {
-  if(page==0){
+void printWiFiStatus()
+{
+  if (page == 0)
+  {
     Serial.print("wifi.txt=\"");
     Serial.print(ssid);
     Serial.print("\"");
@@ -136,7 +145,7 @@ void printWiFiStatus() {
   Serial.write(0xff);
   Serial.write(0xff);
   Serial.write(0xff);
-  
+
   long rssi = WiFi.RSSI();
   Serial.print("speed.txt=\"");
   Serial.print(rssi);
@@ -144,15 +153,17 @@ void printWiFiStatus() {
   Serial.write(0xff);
   Serial.write(0xff);
   Serial.write(0xff);
-  
-  if(page==1){    
-    while (WiFi.status() != WL_CONNECTED) {
+
+  if (page == 1)
+  {
+    while (WiFi.status() != WL_CONNECTED)
+    {
       Serial.print("wp0.pic=");
       Serial.print(4);
       Serial.write(0xff);
       Serial.write(0xff);
       Serial.write(0xff);
-    
+
       Serial.print(".");
       delay(500);
     }
@@ -165,164 +176,156 @@ void printWiFiStatus() {
   }
 }
 
-String update_data() {
+String update_data(String send_data)
+{
   WiFiClientSecure client;
-  client.setInsecure();  // Ignore SSL certificate validation
+  client.setInsecure(); // Ignore SSL certificate validation
   HTTPClient https;
-  String response="";
-  //bool response=false;
+  String response = "";
+  // bool response=false;
 
   Serial.printf("[Firebase] UPDATE with data : %s\n", send_data.c_str());
-  if (https.begin(client, link)) {  // HTTPS
+  if (https.begin(client, link))
+  { // HTTPS
     https.addHeader("Content-Type", "application/x-www-form-urlencoded");
 
     int httpCode = https.PUT(send_data);
-    if (httpCode > 0) {
+    if (httpCode > 0)
+    {
       response = https.getString();
-      //response=true;
+      // response=true;
       Serial.printf("[Firebase] UPDATE response code: %d\n", httpCode);
-      //Serial.println(response); // debug
-    } else {
-      Serial.printf("[Firebase] UPDATE error: %s\n", https.errorToString(httpCode).c_str());
+      // Serial.println(response); // debug
     }
-    https.end();
-  } else {
-    Serial.printf("[Firebase] Unable to connect\n");
-  }
-  return response;
-}
-
-String update_data2() {
-  WiFiClientSecure client;
-  client.setInsecure();  // Ignore SSL certificate validation
-  HTTPClient https;
-  String response="";
-  //bool response=false;
-
-  Serial.printf("[Firebase] UPDATE with data : %s\n", send_data2.c_str());
-  if (https.begin(client, lin2)) {  // HTTPS
-    https.addHeader("Content-Type", "application/x-www-form-urlencoded");
-
-    int httpCode = https.PUT(send_data2);
-    if (httpCode > 0) {
-      response = https.getString();
-      //response=true;
-      Serial.printf("[Firebase] UPDATE response code: %d\n", httpCode);
-      //Serial.println(response); // debug
-    } else {
+    else
+    {
       Serial.printf("[Firebase] UPDATE error: %s\n", https.errorToString(httpCode).c_str());
     }
     https.end();
-  } else {
-    Serial.printf("[Firebase] Unable to connect\n");
   }
-  return response;
-}
-
-String update_data3() {
-  WiFiClientSecure client;
-  client.setInsecure();  // Ignore SSL certificate validation
-  HTTPClient https;
-  String response="";
-  //bool response=false;
-
-  Serial.printf("[Firebase] UPDATE with data : %s\n", send_data3.c_str());
-  if (https.begin(client, lin3)) {  // HTTPS
-    https.addHeader("Content-Type", "application/x-www-form-urlencoded");
-
-    int httpCode = https.PUT(send_data3);
-    if (httpCode > 0) {
-      response = https.getString();
-      //response=true;
-      Serial.printf("[Firebase] UPDATE response code: %d\n", httpCode);
-      //Serial.println(response); // debug
-    } else {
-      Serial.printf("[Firebase] UPDATE error: %s\n", https.errorToString(httpCode).c_str());
-    }
-    https.end();
-  } else {
+  else
+  {
     Serial.printf("[Firebase] Unable to connect\n");
   }
   return response;
 }
 
-String get_data(){
+String get_data()
+{
   WiFiClientSecure client;
-  client.setInsecure();  // Ignore SSL certificate validation
+  client.setInsecure(); // Ignore SSL certificate validation
   HTTPClient https;
-  String response="";
-  //bool response=false;
+  String response = "";
+  // bool response=false;
 
   Serial.println("Firebase] GET data");
-  if (https.begin(client, lin1)) {  // HTTPS
+  if (https.begin(client, lin1))
+  { // HTTPS
     int httpCode = https.GET();
-    if (httpCode > 0) {
+    if (httpCode > 0)
+    {
       response = https.getString();
-      //response=true;
+      // response=true;
       Serial.printf("[Firebase] GET response code: %d\n", httpCode);
-      //Serial.println(response); // debug
-    } else {
+      // Serial.println(response); // debug
+    }
+    else
+    {
       Serial.printf("[Firebase] GET error: %s\n", https.errorToString(httpCode).c_str());
     }
     https.end();
-  } else {
+  }
+  else
+  {
     Serial.printf("[Firebase] Unable to connect\n");
   }
   return response;
 }
 
-void pump(){
-  if(pompauser == "true"||TAir>ATAir){
+void pump()
+{
+  if (pompauser == "true" || TAir > ATAir)
+  {
     digitalWrite(2, LOW);
     digitalWrite(0, LOW);
     pompa = "true";
-    if(page==0){
+    if (page == 0)
+    {
       /*Serial.print("onoff.txt=\"on\"");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
       Serial.print("onoff.pco=3562");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);*/
-      Serial.print("bt0.val=1");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+      Serial.print("bt0.val=1");
+      Serial.write(0xff);
+      Serial.write(0xff);
+      Serial.write(0xff);
     }
   }
-  else{
+  else
+  {
     digitalWrite(2, HIGH);
     digitalWrite(0, HIGH);
     pompa = "false";
-    if(page==0){
+    if (page == 0)
+    {
       /*Serial.print("onoff.txt=\"off\"");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
       Serial.print("onoff.pco=63813");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);*/
-      Serial.print("bt0.val=0");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+      Serial.print("bt0.val=0");
+      Serial.write(0xff);
+      Serial.write(0xff);
+      Serial.write(0xff);
     }
   }
 
-  if(TAir>ATAir && page==0){
+  if (TAir > ATAir && page == 0)
+  {
     Serial.print("t17.txt=\"Tinggi\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t17.pco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(BTAir<=TAir<=ATAir && page==0){
+  else if (BTAir <= TAir <= ATAir && page == 0)
+  {
     Serial.print("t17.txt=\"Normal\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t17.pco=3562");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(BTAir>TAir && page==0){
+  else if (BTAir > TAir && page == 0)
+  {
     Serial.print("t17.txt=\"Rendah\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t17.pco=22078");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
 }
 
-void loop() {
-  nextion="";
+void loop()
+{
+  nextion = "";
   unsigned long nowmillis = millis();
-  if(page==0&&nowmillis-beforeget>7500){pompauser=get_data();beforeget = nowmillis;}
+  if (page == 0 && nowmillis - beforeget > 7500)
+  {
+    pompauser = get_data();
+    beforeget = nowmillis;
+  }
   printWiFiStatus();
-  //volarus();
+  // volarus();
   pump();
-  if(nowmillis - before > 60000 && page==0){
+  if (nowmillis - before > 60000 && page == 0)
+  {
     before = nowmillis;
-    
+
     TempTinggi();
     AutoTAir();
     LembapTanah();
@@ -330,335 +333,521 @@ void loop() {
     prediksi();
 
     send_data = (String("{") +
-      "\"kelembapan\":"+kelembapan+","+
-      "\"suhu\":"+temp+","+
-      "\"tinggiair\":"+TAir+","+
-      "\"pompa\":"+pompa+""+
-    "}");
-    update_data();
+                 "\"kelembapan\":" + kelembapan + "," +
+                 "\"suhu\":" + temp + "," +
+                 "\"tinggiair\":" + TAir + "," +
+                 "\"pompa\":" + pompa + "" +
+                 "}");
+    update_data(send_data);
     /*send_data2 = (String("{") +
       "\"Tegangan\":"+volt+","+
       "\"Arus\":"+ampere+""+
     "}");
     update_data2();*/
   }
-  if(Serial.available()){
-    while(Serial.available()){
+  if (Serial.available())
+  {
+    while (Serial.available())
+    {
       nextion += Serial.read();
     }
     delay(50);
   }
   Serial.println(nextion);
-  if(page==0 || page==2){
+  if (page == 0 || page == 2)
+  {
     nextion = nextion.substring(10, 40);
   }
   nexid = nextion.substring(4, 6);
   String nexus = nextion;
   Serial.println(nexus);
 
-  if(nexid == "37"){
-    //page2
-    page=2;
-    Serial.print("page 2");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-    Serial.print("page 2");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  if (nexid == "37")
+  {
+    // page2
+    page = 2;
+    Serial.print("page 2");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.print("page 2");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(nexid == "16"){
-    //page1
-    page=1;
-    Serial.print("page 1");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-    Serial.print("page 1");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  else if (nexid == "16")
+  {
+    // page1
+    page = 1;
+    Serial.print("page 1");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.print("page 1");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(nexid == "15"){
-    //simpan
+  else if (nexid == "15")
+  {
+    // simpan
     /*EEPROM.put(1, umur);
     EEPROM.put(2, harga);
     EEPROM.put(3, luas);
     EEPROM.put(4, pupuk);
     EEPROM.commit();*/
     send_data3 = (String("{") +
-      "\"umur\":"+umur+","+
-      "\"harga\":"+harga+","+
-      "\"luas\":"+luas+","+
-      "\"predict\":"+predict+","+
-      "\"pupuk\":"+pupuk+","+
-      "\"hasil\":"+hasil+""+
-    "}");
-    update_data3();
-    Serial.print("t8.txt=\"Data Tersimpan!\"");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-    Serial.print("t8.txt=\"Data Tersimpan!\"");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+                  "\"umur\":" + umur + "," +
+                  "\"harga\":" + harga + "," +
+                  "\"luas\":" + luas + "," +
+                  "\"predict\":" + predict + "," +
+                  "\"pupuk\":" + pupuk + "," +
+                  "\"hasil\":" + hasil + "" +
+                  "}");
+    update_data(send_data3);
+    Serial.print("t8.txt=\"Data Tersimpan!\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.print("t8.txt=\"Data Tersimpan!\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     delay(1000);
-    Serial.print("t8.txt=\" \"");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  }
-  else if(nexid == "20"){
-    //page0
-    page=0;
-    Serial.print("page 0");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-    Serial.print("page 0");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  }
-  else if(nexid == "60"){
-    page=0;
-    Serial.print("page 0");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-    Serial.print("page 0");Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  }
-    
-  //pump();
-  //80=umur, 10=harga, 12=luas, 15=pupuk+, 14=pupuk-, 18=simpan, 37=page2, 20=page0
-  if(page==2){
-    Serial.print("wifi.txt=\"");Serial.print(ssid);Serial.print("\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-    
-    Serial.print("umur.txt=\"");Serial.print(sumur);Serial.print("\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-
-    Serial.print("harga.txt=\"");Serial.print(sharga);Serial.print("\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-
-    Serial.print("luas.txt=\"");Serial.print(sluas);Serial.print("\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-
-    Serial.print("pupuk.txt=\"");Serial.print(spupuk);Serial.print("\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-
-    if(con==0){input();}
-    else if(con==1){keypadumur();}
-    else if(con==2){keypadharga();}
-    else if(con==3){keypadluas();}
-    else if(con==4){keypadpupuk();}
-  }
-
-  if(page==0&&nowmillis-beforepre>30000){
+    Serial.print("t8.txt=\" \"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+  }
+  else if (nexid == "20")
+  {
+    // page0
+    page = 0;
+    Serial.print("page 0");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.print("page 0");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+  }
+  else if (nexid == "60")
+  {
+    page = 0;
+    Serial.print("page 0");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.print("page 0");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+  }
+
+  // pump();
+  // 80=umur, 10=harga, 12=luas, 15=pupuk+, 14=pupuk-, 18=simpan, 37=page2, 20=page0
+  if (page == 2)
+  {
+    Serial.print("wifi.txt=\"");
+    Serial.print(ssid);
+    Serial.print("\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+
+    Serial.print("umur.txt=\"");
+    Serial.print(sumur);
+    Serial.print("\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+
+    Serial.print("harga.txt=\"");
+    Serial.print(sharga);
+    Serial.print("\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+
+    Serial.print("luas.txt=\"");
+    Serial.print(sluas);
+    Serial.print("\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+
+    Serial.print("pupuk.txt=\"");
+    Serial.print(spupuk);
+    Serial.print("\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+
+    if (con == 0)
+    {
+      input();
+    }
+    else if (con == 1)
+    {
+      keypadumur();
+    }
+    else if (con == 2)
+    {
+      keypadharga();
+    }
+    else if (con == 3)
+    {
+      keypadluas();
+    }
+    else if (con == 4)
+    {
+      keypadpupuk();
+    }
+  }
+
+  if (page == 0 && nowmillis - beforepre > 30000)
+  {
     send_data3 = (String("{") +
-      "\"umur\":"+umur+","+
-      "\"harga\":"+harga+","+
-      "\"luas\":"+luas+","+
-      "\"predict\":"+predict+","+
-      "\"pupuk\":"+pupuk+","+
-      "\"hasil\":"+hasil+""+
-    "}");
-    update_data3();
+                  "\"umur\":" + umur + "," +
+                  "\"harga\":" + harga + "," +
+                  "\"luas\":" + luas + "," +
+                  "\"predict\":" + predict + "," +
+                  "\"pupuk\":" + pupuk + "," +
+                  "\"hasil\":" + hasil + "" +
+                  "}");
+    update_data(send_data3);
     beforepre = nowmillis;
   }
 }
 
-void TempTinggi(){
+void TempTinggi()
+{
   tempsensor.requestTemperatures();
   temp = tempsensor.getTempCByIndex(0);
-  Serial.print("suhu.txt=\"");Serial.print(temp);Serial.print("°C\"");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  float RTAir = distanceSensor.measureDistanceCm(temp);//TAir[0]
+  Serial.print("suhu.txt=\"");
+  Serial.print(temp);
+  Serial.print("°C\"");
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  float RTAir = distanceSensor.measureDistanceCm(temp); // TAir[0]
   TAir = 11.5 - RTAir;
-  int airValue = TAir/8*100;
-  Serial.print("air.txt=\"");Serial.print(TAir);Serial.print(" cm\"");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  Serial.print("airValue.val=");Serial.print(airValue);
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  if(temp < 18){
+  int airValue = TAir / 8 * 100;
+  Serial.print("air.txt=\"");
+  Serial.print(TAir);
+  Serial.print(" cm\"");
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.print("airValue.val=");
+  Serial.print(airValue);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  if (temp < 18)
+  {
     Serial.print("t16.txt=\"Dingin\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t16.pco=22078");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(18 <= temp < 25){
+  else if (18 <= temp < 25)
+  {
     Serial.print("t16.txt=\"Sejuk\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t16.pco=3562");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(25 <= temp < 33){
+  else if (25 <= temp < 33)
+  {
     Serial.print("t16.txt=\"Hangat\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t16.pco=64512");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(33 <= temp){
+  else if (33 <= temp)
+  {
     Serial.print("t16.txt=\"Panas\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t16.pco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
 }
 
-void LembapTanah(){
-  kelembapan = 100-(ads.readADC_SingleEnded(0)/(32768*5/6.144))*100;
-  Serial.print("kelembapan.txt=\"");Serial.print(kelembapan);Serial.print("%\"");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  if(kelembapan < 65){
+void LembapTanah()
+{
+  kelembapan = 100 - (ads.readADC_SingleEnded(0) / (32768 * 5 / 6.144)) * 100;
+  Serial.print("kelembapan.txt=\"");
+  Serial.print(kelembapan);
+  Serial.print("%\"");
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  if (kelembapan < 65)
+  {
     Serial.print("t15.txt=\"Kering\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t15.pco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(65 <= kelembapan <93){
+  else if (65 <= kelembapan < 93)
+  {
     Serial.print("t15.txt=\"Lembap\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t15.pco=3562");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(93 <= kelembapan){
+  else if (93 <= kelembapan)
+  {
     Serial.print("t15.txt=\"Basah\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t15.pco=22078");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
 }
 
-void volarus(){
+void volarus()
+{
   arsample = 0;
   unsigned int y = 0;
-  for(int y = 0; y < 20; y++){
+  for (int y = 0; y < 20; y++)
+  {
     arsample = arsample + ads.readADC_SingleEnded(1);
     delay(4);
   }
-  avgampere = arsample/20.0;
-  ampere = (2.5-(arsample*5.0/32768.0))/0.066;
-  volt = ads.readADC_SingleEnded(2)*18.432/32768.0;
-  if(page==1){
-    Serial.print("Tegangan.txt\"");Serial.print(volt);Serial.print("\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-    Serial.print("Arus.txt\"");Serial.print(ampere);Serial.print("\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  avgampere = arsample / 20.0;
+  ampere = (2.5 - (arsample * 5.0 / 32768.0)) / 0.066;
+  volt = ads.readADC_SingleEnded(2) * 18.432 / 32768.0;
+  if (page == 1)
+  {
+    Serial.print("Tegangan.txt\"");
+    Serial.print(volt);
+    Serial.print("\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.print("Arus.txt\"");
+    Serial.print(ampere);
+    Serial.print("\"");
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
   delay(50);
 }
 
-void input(){
+void input()
+{
   Serial.print("umur.bco=65535");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
   Serial.print("harga.bco=65535");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
   Serial.print("luas.bco=65535");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
   Serial.print("pupuk.bco=65535");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
   uint8_t key;
-  key=keyPad.getKey();
-  if(key != KP__NOKEY){
+  key = keyPad.getKey();
+  if (key != KP__NOKEY)
+  {
     char keys = keyPad.getLastChar();
     Serial.println(keys);
-    if(keys == 'A'){
-      con=1;
+    if (keys == 'A')
+    {
+      con = 1;
     }
-    else if(keys == 'B'){
-      con=2;
+    else if (keys == 'B')
+    {
+      con = 2;
     }
-    else if(keys == 'C'){
-      con=3;
+    else if (keys == 'C')
+    {
+      con = 3;
     }
-    else if(keys == 'D'){
-      con=4;
+    else if (keys == 'D')
+    {
+      con = 4;
+    }
+    else
+    {
+      con = 0;
     }
-    else{con=0;}
   }
 }
 
-void keypadumur(){
+void keypadumur()
+{
   Serial.print("umur.bco=57085");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
   uint8_t key;
-  key=keyPad.getKey();
-  if(key != KP__NOKEY) {
+  key = keyPad.getKey();
+  if (key != KP__NOKEY)
+  {
     char keys = keyPad.getLastChar();
     Serial.println(keys);
-    if(keys >= '0' && keys <= '9'){
+    if (keys >= '0' && keys <= '9')
+    {
       dis += keys;
       sumur = dis;
       Serial.println(sumur);
     }
-    else if(keys == '#'){
+    else if (keys == '#')
+    {
       sumur = dis;
       umur = sumur.toInt();
       Serial.println(umur);
       dis = "";
-      con=0;
+      con = 0;
     }
-    else if(keys == '*'){
+    else if (keys == '*')
+    {
       dis = "";
       sumur = umur;
-      con=0;
+      con = 0;
     }
   }
 }
 
-void keypadharga(){
+void keypadharga()
+{
   Serial.print("harga.bco=57085");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
   uint8_t key;
-  key=keyPad.getKey();
-  if(key != KP__NOKEY) {
+  key = keyPad.getKey();
+  if (key != KP__NOKEY)
+  {
     char keys = keyPad.getLastChar();
     Serial.println(keys);
-    if(keys >= '0' && keys <= '9'){
+    if (keys >= '0' && keys <= '9')
+    {
       dis += keys;
       sharga = dis;
       Serial.println(sharga);
     }
-    else if(keys == '#'){
+    else if (keys == '#')
+    {
       sharga = dis;
       harga = sharga.toInt();
       Serial.println(harga);
       dis = "";
-      con=0;
+      con = 0;
     }
-    else if(keys == '*'){
+    else if (keys == '*')
+    {
       dis = "";
       sharga = harga;
-      con=0;
+      con = 0;
     }
   }
 }
 
-void keypadluas(){
+void keypadluas()
+{
   Serial.print("luas.bco=57085");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
   uint8_t key;
-  key=keyPad.getKey();
-  if(key != KP__NOKEY) {
+  key = keyPad.getKey();
+  if (key != KP__NOKEY)
+  {
     char keys = keyPad.getLastChar();
     Serial.println(keys);
-    if(keys >= '0' && keys <= '9'){
+    if (keys >= '0' && keys <= '9')
+    {
       dis += keys;
       sluas = dis;
       Serial.println(sluas);
     }
-    else if(keys == '#'){
+    else if (keys == '#')
+    {
       sluas = dis;
       luas = sluas.toInt();
       Serial.println(luas);
       dis = "";
-      con=0;
+      con = 0;
     }
-    else if(keys == '*'){
+    else if (keys == '*')
+    {
       dis = "";
       sluas = luas;
-      con=0;
+      con = 0;
     }
   }
 }
 
-void keypadpupuk(){
+void keypadpupuk()
+{
   Serial.print("pupuk.bco=57085");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
   uint8_t key;
-  key=keyPad.getKey();
-  if(key != KP__NOKEY) {
+  key = keyPad.getKey();
+  if (key != KP__NOKEY)
+  {
     char keys = keyPad.getLastChar();
     Serial.println(keys);
-    if(keys >= '0' && keys <= '9'){
+    if (keys >= '0' && keys <= '9')
+    {
       dis += keys;
       spupuk = dis;
       Serial.println(spupuk);
     }
-    else if(keys == '#'){
+    else if (keys == '#')
+    {
       spupuk = dis;
       pupuk = spupuk.toInt();
       Serial.println(pupuk);
       dis = "";
-      con=0;
+      con = 0;
     }
-    else if(keys == '*'){
+    else if (keys == '*')
+    {
       dis = "";
       spupuk = pupuk;
-      con=0;
+      con = 0;
     }
   }
 }
@@ -669,154 +858,239 @@ kering < 65 <= lembap < 93 <= basah
 gagal = 0 , kurang = 40 , sedang = 70 , berhasil = 100 , melimpah = 130
 berhasil = 1 ton = 1000m2
 */
-void Fuzzy(){
-  if(temp<18 && kelembapan<65){//dingin kering
+void Fuzzy()
+{
+  if (temp < 18 && kelembapan < 65)
+  { // dingin kering
     fuzzy = "gagal";
     kali = 0;
     predict = 0;
     Serial.print("t12.txt=\"Gagal\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(temp<18 && 65<=kelembapan<93){//dingin lembap
+  else if (temp < 18 && 65 <= kelembapan < 93)
+  { // dingin lembap
     fuzzy = "sedang";
     kali = 0.7;
     predict = 2;
     Serial.print("t12.txt=\"Sedang\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=64512");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(temp<18 && 93<=kelembapan){//dingin basah
+  else if (temp < 18 && 93 <= kelembapan)
+  { // dingin basah
     fuzzy = "kurang";
     kali = 0.4;
     predict = 1;
     Serial.print("t12.txt=\"Kurang\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(18<=temp<25 && kelembapan<65){//sejuk kering
+  else if (18 <= temp < 25 && kelembapan < 65)
+  { // sejuk kering
     fuzzy = "kurang";
     kali = 0.4;
     predict = 1;
     Serial.print("t12.txt=\"Kurang\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(18<=temp<25 && 65<=kelembapan<93){//sejuk lembap
+  else if (18 <= temp < 25 && 65 <= kelembapan < 93)
+  { // sejuk lembap
     fuzzy = "melimpah";
     kali = 1.246;
     predict = 4;
     Serial.print("t12.txt=\"Melimpah\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=22078");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(18<=temp<25 && 93<=kelembapan){//sejuk basah
+  else if (18 <= temp < 25 && 93 <= kelembapan)
+  { // sejuk basah
     fuzzy = "kurang";
     kali = 0.4;
     predict = 1;
     Serial.print("t12.txt=\"Kurang\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(25<=temp<33 && kelembapan<65){//hangat kering
+  else if (25 <= temp < 33 && kelembapan < 65)
+  { // hangat kering
     fuzzy = "kurang";
     kali = 0.4;
     predict = 1;
     Serial.print("t12.txt=\"Kurang\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(25<=temp<33 && 65<=kelembapan<93){//hangat lembap
+  else if (25 <= temp < 33 && 65 <= kelembapan < 93)
+  { // hangat lembap
     fuzzy = "berhasil";
     kali = 1;
     predict = 3;
     Serial.print("t12.txt=\"Berhasil\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=3562");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(25<=temp<33 && 93<=kelembapan){//hangat basah
+  else if (25 <= temp < 33 && 93 <= kelembapan)
+  { // hangat basah
     fuzzy = "kurang";
     kali = 0.4;
     predict = 1;
     Serial.print("t12.txt=\"Kurang\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(33<=temp && kelembapan<65){//panas kering
+  else if (33 <= temp && kelembapan < 65)
+  { // panas kering
     fuzzy = "gagal";
     kali = 0;
     predict = 0;
     Serial.print("t12.txt=\"Gagal\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(33<=temp && 65<=kelembapan<93){//panas lembap
+  else if (33 <= temp && 65 <= kelembapan < 93)
+  { // panas lembap
     fuzzy = "sedang";
     kali = 0.7;
     predict = 2;
     Serial.print("t12.txt=\"Sedang\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=64512");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
-  else if(33<=temp && 93<=kelembapan){//panas basah
+  else if (33 <= temp && 93 <= kelembapan)
+  { // panas basah
     fuzzy = "kurang";
     kali = 0.4;
     predict = 1;
     Serial.print("t12.txt=\"Kurang\"");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
     Serial.print("t12.bco=63813");
-    Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
+    Serial.write(0xff);
   }
 }
 
-void AutoTAir(){
-  if(0<=umur<=8||70<=umur<=71||91<=umur<=92){
+void AutoTAir()
+{
+  if (0 <= umur <= 8 || 70 <= umur <= 71 || 91 <= umur <= 92)
+  {
     ATAir = 1;
     BTAir = 0.2;
   }
-  else if(9<=umur<=12||25<=umur<=28||45<=umur<=49){
+  else if (9 <= umur <= 12 || 25 <= umur <= 28 || 45 <= umur <= 49)
+  {
     ATAir = 2;
     BTAir = 0.5;
   }
-  else if(13<=umur<=20||29<=umur<=30||43<=umur<=44||72<=umur<=76||89<=umur<=90){
+  else if (13 <= umur <= 20 || 29 <= umur <= 30 || 43 <= umur <= 44 || 72 <= umur <= 76 || 89 <= umur <= 90)
+  {
     ATAir = 4;
     BTAir = 1;
   }
-  else if(21<=umur<=24||31<=umur<=36||61<=umur<=69){
+  else if (21 <= umur <= 24 || 31 <= umur <= 36 || 61 <= umur <= 69)
+  {
     ATAir = 5;
     BTAir = 1;
   }
-  else if(37<=umur<=42||50<=umur<=60||77<=umur<=88){
+  else if (37 <= umur <= 42 || 50 <= umur <= 60 || 77 <= umur <= 88)
+  {
     ATAir = 8;
     BTAir = 3;
   }
-  else{
+  else
+  {
     ATAir = 5;
     BTAir = 0;
   }
 }
 
-void prediksi(){
+void prediksi()
+{
   Fuzzy();
   hasil = luas * kali;
   total = hasil * harga;
-  Serial.print("t13.txt=\"");Serial.print(hasil);Serial.print("Kg\"");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  Serial.print("t14.txt=\"Rp");Serial.print(harga);Serial.print("\"");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  Serial.print("t19.txt=\"Rp");Serial.print(total);Serial.print("\"");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
-  Serial.print("LTanah.txt=\"");Serial.print(luas);Serial.print(" m2\"");
-  Serial.write(0xff);Serial.write(0xff);Serial.write(0xff);
+  Serial.print("t13.txt=\"");
+  Serial.print(hasil);
+  Serial.print("Kg\"");
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.print("t14.txt=\"Rp");
+  Serial.print(harga);
+  Serial.print("\"");
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.print("t19.txt=\"Rp");
+  Serial.print(total);
+  Serial.print("\"");
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.print("LTanah.txt=\"");
+  Serial.print(luas);
+  Serial.print(" m2\"");
+  Serial.write(0xff);
+  Serial.write(0xff);
+  Serial.write(0xff);
 }