No logdata after last code update

[Ivohome]

After the last code update, the log data for several parameters is missing! I do not have any log data for e.g. Active power and Line voltage L1, L2 and L3 anymore. But I still have log data from e.g. Total system power L1, L2 and L3.
So it seems the data of continuous values is missing and cumulative data is still being logged.

Can you please check (and hopefully correct) this issue?

Also I noticed that the log file is now full with connection problems (just a very short part of the log below). With the previous plugin I never noticed this, although then the domoticz gui hung every 2-4 days while the logging still was OK.

2019-11-08 02:15:26.091 (SDM630) Connection problem
2019-11-08 02:53:08.158 (SDM630) Connection problem
2019-11-08 03:43:26.170 (SDM630) Connection problem
2019-11-08 04:35:49.040 (SDM630) Connection problem
2019-11-08 05:30:18.033 (SDM630) Connection problem
2019-11-08 05:57:32.713 (SDM630) Connection problem
2019-11-08 06:10:07.300 (SDM630) Connection problem
2019-11-08 06:12:13.417 (SDM630) Connection problem
2019-11-08 07:06:43.349 (SDM630) Connection problem
2019-11-08 07:12:58.333 (SDM630) Connection problem
2019-11-08 07:16:05.396 (SDM630) Connection problem
2019-11-08 07:36:00.376 (SDM630) Connection problem
2019-11-08 09:26:01.473 (SDM630) Connection problem

Does anybody recognize this behavior?