Skip to content

Latest commit

 

History

History
82 lines (54 loc) · 1.82 KB

README.rst

File metadata and controls

82 lines (54 loc) · 1.82 KB
Raw

The meta-labgrid layer provides support for integrating the labgrid exporter into your device.

Please see the corresponding sections below for details.

Dependencies

This layer depends on:

URI: git://git.openembedded.org/bitbake
branch: master

URI: git://git.openembedded.org/openembedded-core
layers: meta
branch: master

URI: git://git.openembedded.org/meta-openembedded
layers: meta-python
branch: master

Patches

Please submit patches via GitHub pull request on: https://github.com/labgrid-project/meta-labgrid

Maintainers: - Enrico Jörns <[email protected]> - Rouven Czerwinski <[email protected]>

Table of Contents

  1. Adding the labgrid layer to your build
  2. Building labgrid exporter
  3. References

I. Adding the labgrid Layer to Your Build

In order to use this layer, you need to make the build system aware of it.

Assuming the labgrid layer exists at the top-level of your yocto build tree, you can add it to the build system by adding the location of the labgrid layer to bblayers.conf, along with any other layers needed. e.g.:

BBLAYERS ?= " \
  /path/to/yocto/meta \
  /path/to/yocto/meta-poky \
  /path/to/yocto/meta-yocto-bsp \
  /path/to/yocto/meta-openembedded/meta-python \
  /path/to/yocto/meta-labgrid \
  "

II. Adding the labgrid exporter to Your Device

To prepare your device for using the labgrid exporter, you have to follow at least the following steps:

  1. Add the labgrid package to your systems image recipe:

    IMAGE_INSTALL:append = " python3-labgrid"

  2. Build the rootfs for your device:

    bitbake my-machine-recipe

III. References

[1] Labgrid documentation http://labgrid.readthedocs.io/en/latest/