Skip to content
This repository has been archived by the owner on Dec 14, 2020. It is now read-only.

Access modem Web UI on WAN port (no script)

Jump to bottom
Iulian Gabriel Cata edited this page Feb 4, 2015 · 5 revisions

This guide provides an easy configuration to access web-based UI of your xDSL/Cable modem connected to the wan port of your Asus router. Important! - This only works if you are able to acess the modem's configuration. For this to work and avoid issues, Modem and Router will be configured on different subnets.

What we will do.

Step 1. Change your Modem ip to 192.168.0.1 (Below an inlustrated example with a TP-Link modem)

Modem IP

Step 2. Go to LAN -> LAN IP. Make sure your Router is on a different subnet, by default It is. Click Apply.(Default ip adress will be 192.168.1.1)

Router IP

Step 3. Go to WAN -> Internet Connection -> WAN IP Setting (section). Assign your Router an IP from the Modem's subnet: Switch Get the WAN IP automatically to No and set IP = 192.168.0.2 | Subnet Mask = 255.255.255.0 | Gateway = 192.168.0.1 and click Apply at the bottom.

WAN IP

Step 4. Test if you can Access the modem's interface. Open your browser and enter 192.168.0.1

That's it !

Clone this wiki locally