DDNS services

Introduction to In-a-dyn

Starting with version 384.7, Asuswrt-Merlin uses In-a-dyn for DDNS updates instead of the obsolete ez-ipupdate client used until then. This client adds HTTPS support, in addition to supporting more services, and being able to easily be customized to support a lot of additional services

By default, the same services as before are supported (including full support for Asus's own DDNS through a custom-developed plugin). Freedns.afraid.org was also added to the list of natively supported services on the webui. You can further extend In-a-dyn either by adding additional config entries through the usual methods (inadyn.conf, inadyn.conf.add and inadyn.postconf), in addition to the previously supported ddns-start script. Note that if your ddns-start script was previously using ez-ipupdate, you will have to rewrite it to use In-a-dyn instead.

Using one of the services supported by In-a-dyn but not by the Asuswrt-Merlin webui

First, create an inadyn.conf config, and store it into /jffs/ so it will persist through reboots. Please consult the In-a-dyn documentation for more information on how to configure an In-a-dyn service. Make sure your config file contains the following lines:

ca-trust-file = /etc/ssl/certs/ca-certificates.crt
iterations = 1

This will ensure that HTTPS-based updates will be able to validate the server certificate, and also that In-a-dyn will exit once it has complete its update (Asuswrt-Merlin runs In-a-dyn as a client rather than as a daemon).

Here is an example for a complete In-a-dyn config file for a custom service, based after selfhost.de:

ca-trust-file   = /etc/ssl/certs/ca-certificates.crt
iterations = 1
custom selfhost {
	ddns-server = carol.selfhost.de
	ddns-path = "/nic/update?hostname=%%h&myip=%%i"
	hostname = MY_HOSTNAME.selfhost.eu
	username    = 12345
	password    = "MY_PASSWORD"
}

If you wish to use your local WAN IP instead of relying on the DDNS service's remote check method, you can insert the following line within your custom or provider block:

checkip-command = "/usr/sbin/nvram get wan0_ipaddr"

Next, create a ddns-start script that will invoke In-a-dyn, pointed at your custom config. Such a script would look like this:

#!/bin/sh/
/usr/sbin/inadyn -f /jffs/inadyn-custom.conf -e "/sbin/ddns_custom_updated 1" --exec-nochg "/sbin/ddns_custom_updated 1"

Note In-a-dyn will take care of calling ddns_updated as appropriate if the update succeeded when using these parameters, so no need to explicitly run it manually after the update.

On the webui, set your DDNS provider to "CUSTOM".

Updating multiple services

In-a-dyn allows you to define multiple services within a single config file. If for example you configured no-ip.com through the webui, and you also want to update freedns.afraid.org, create the following /jffs/configs/inadyn.conf.add file, with your second service definition:

provider [email protected] {
	hostname = MY_HOSTNAME.mooo.com
	username = "MY_USERNAME"
	password = "MY_PASSWORD"
	checkip-command = "/usr/sbin/nvram get wan0_ipaddr"
}

Whenever Asuswrt-Merlin will issue a ddns update, both the service on the webui and your additional Freedns service will be updated at the same time.

DDNS updates through either double NAT or a CGNAT connection

Also starting with 384.7, Asuswrt-Merlin lets you choose between Internal or External IP check methods. The Internal method is the same one that was used until now - the IP on your WAN interface is retrieved from nvram, and provided to In-a-dyn, which will provide it to the DDNS server (provided that server supports it). The External method is new, and lets the DDNS service provider determine your WAN IP (based on the IP from which you connect with it). This will allow your provider to retrieve your real public IP if your Asus router is behind another router, or your ISP uses CGNAT to provide you with a non-public IP.

Note that this parameter only applies to the built-in services listed on the webui. If you use a custom config or script, it will be up to you to handle how the IP is provided - that webui setting will have no effect.