Skip to content
This repository has been archived by the owner on Dec 14, 2020. It is now read-only.

Installing Transmission through Entware

Jump to bottom
TeHashX edited this page Mar 14, 2016 · 20 revisions

Introduction

Asus's DownloadMaster suffers from various issues: old versions of Transmission and OpenSSL, no way to disable aMule which will hog all your bandwidth, etc...

I recommend uninstalling Download Master, and manually setting up Transmission through Entware instead. This will bring various benefits:

  1. Better performance overall
  2. Magnet link support
  3. Most people don't care about aMule or NZBGet - that will cut through the fat.

Initial configuration

For this I will assume your disk is mounted as /mnt/sda1/ (just adjust the paths as needed if yours is mounted as /mnt/sdb1 instead, for instance).

I will also assume that your disk is already formatted as either Ext2 or Ext3. If not, look on the web for information on how to reformat your disk.

Setup Entware and install the nano editor (unless you are already comfortable with the vi editor):

opkg install nano

Installation

We need to install Transmission:

opkg install transmission-web

Create the data directories (adjust as desired):

mkdir /mnt/sda1/Torrent/
mkdir /mnt/sda1/Torrent/Incomplete
mkdir /mnt/sda1/Torrent/Watch
mkdir /mnt/sda1/Torrent/Completed

Make sure Transmission isn't already running, then edit its configuration:

/opt/etc/init.d/S88transmission stop
nano -w /opt/etc/transmission/settings.json

You will want to adjust the following paths:

"download-dir": "/mnt/sda1/Torrent/Completed",
"watch-dir": "/mnt/sda1/Torrent/Watch",
"incomplete-dir": "/mnt/sda1/Torrent/Incomplete",

It's also recommended to password-protect the webui. Set the following parameters:

"rpc-authentication-required": true,
"rpc-username": "admin",
"rpc-password": "yourpassword",

Your password will be hashed the first time Transmission runs, so it's safe to enter it as clear text there.

Firewall configuration

We need to create a user script that will open the required port in the firewall. If you changed this from the default value in settings.json then update this accordingly.

nano -w /jffs/scripts/firewall-start

Enter the following content (omit the first line if you already have an existing script)

#!/bin/sh
iptables -I INPUT -p tcp --destination-port 51413 -j ACCEPT
iptables -I INPUT -p udp --destination-port 51413 -j ACCEPT

Then make it executable:

chmod a+rx /jffs/scripts/firewall-start

Using it

Everything is now configured. You can manually start it immediately (it will automatically start at boot time):

/jffs/scripts/firewall-start
/opt/etc/init.d/S88transmission start

Access it through http://asus.router.com:9091/transmission

EMAIL NOTIFICATIONS

If you have a slow internet connection and you want to be notified when a torrent has finished downloading, place the following script which I called tmail.sh in /jffs/scripts but first don't forget to fill: SMTP, FROM, TO, USER and PASS with your credentials.

WARNING, may become annoying if you are downloading lots of torrents

#!/bin/sh

SMTP="your-smtp-server:587"
FROM="your-email-address"
TO="your-email-address"
USER="email-user-name"
PASS="email-password"
FROMNAME="Asus Router"
torrent_name="$TR_TORRENT_NAME"

echo "Subject: Download notification!" >/tmp/tmail.txt
echo "From: \\"$FROMNAME\\"<$FROM>" >>/tmp/tmail.txt
echo "Date: `date -R`" >>/tmp/tmail.txt
echo "" >>/tmp/tmail.txt
echo Transmissionbt has finished downloading "$TR_TORRENT_NAME" on `date +\%d/\%m/\%Y` at `date +\%T` >>/tmp/tmail.txt
echo "" >>/tmp/tmail.txt
echo "Your friendly router." >>/tmp/tmail.txt
echo "" >>/tmp/tmail.txt

cat /tmp/tmail.txt | /usr/sbin/sendmail -S"$SMTP" -f"$FROM" $TO -au"$USER" -ap"$PASS"

rm /tmp/tmail.txt

Stop transmission daemon, change this two lines in /opt/etc/transmission/settings.json and start transmission again

"script-torrent-done-enabled": true, 
"script-torrent-done-filename": "/jffs/scripts/tmail.sh",

EMAIL IN HTML FORMAT

#!/bin/sh

SMTP="your-smtp-server:587"
FROM="your-email-address"
TO="your-email-address"
USER="email-user-name"
PASS="email-password"
FROMNAME="Asus Router"
torrent_name="$TR_TORRENT_NAME"
torrent_version="$TR_APP_VERSION"

logger -t "$0" "Mail sent, about "$TR_TORRENT_NAME""

echo MIME-Version: 1.0 >/tmp/tmail.html
echo Content-Type: text/html >>/tmp/tmail.html
echo "Subject: Download notification" >>/tmp/tmail.html
echo "From: \\"$FROMNAME\\"<$FROM>" >>/tmp/tmail.html
echo "Date: `date -R`" >>/tmp/tmail.html
echo "" >>/tmp/tmail.html
echo "<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">" >>/tmp/tmail.html
echo "<html>" >>/tmp/tmail.html
echo "<head><title></title>" >>/tmp/tmail.html
echo "</head>" >>/tmp/tmail.html

echo "<p>Transmissionbt v"$torrent_version" finished downloading:</p>" >>/tmp/tmail.html
echo "<p><b>"$TR_TORRENT_NAME"<b></p>" >>/tmp/tmail.html
echo "<p>on `date +\%d/\%m/\%Y` at `date +\%T`</p>" >>/tmp/tmail.html
echo "" >>/tmp/tmail.html
echo "<p>Your awesome router.</p>" >>/tmp/tmail.html
echo "<a href="http://tinypic.com?ref=2zod5ja" target="_blank"><img src="http://i40.tinypic.com/2zod5ja.png" border="0" alt="Image and video hosting by TinyPic"></a>" >>/tmp/tmail.html
echo "</body>" >>/tmp/tmail.html
echo "</html>" >>/tmp/tmail.html

cat /tmp/tmail.html | /usr/sbin/sendmail -S"$SMTP" -f"$FROM" $TO -au"$USER" -ap"$PASS"

rm /tmp/tmail.html

Example of received email: email Post issues here

Clone this wiki locally