Open source firmware and utilities for Minipro TL866xx series of chip programmers
This project's scope is dealing with the firmware within the TL866 itself. It includes software for dumping, reprogramming, and manipulating the firmware. Schematics and discussion of internal operations are also here.
Also here you can find a linux USB wrapper for TL866 and TL866II which make these programmers native software to work with Wine. The wrapper is located in wine folder.
sudo apt-get install build-essential pkg-config git libusb-1.0-0-dev libudev-dev qt5-default qtbase5-dev
If you want to compile with old QT4 replace qt5-default qtbase5-dev with libqt4-dev
git clone https://github.com/radiomanV/TL866
cd TL866/TL866_Updater/QT
qmake
make
sudo cp TL866_Updater /usr/local/bin
If you want to access the programmer as a regular user, you'll have to configure udev to recognize the programmer and set appropriate access permissions.
sudo cp udev/*.rules /etc/udev/rules.d/
sudo udevadm trigger
You'll also have to add your regular user to the plugdev system
group:
sudo usermod -a -G plugdev YOUR-USER
Note that this change will only become effective after your next login.
Follow instructions for Linux. You'll need pkg-config, libusb, and libqt4 or above through a package installer. Macports and Homebrew have been used successfully. Udev doesn't exist for macOS so native IOKit is used instead.
Homebrew instructions:
brew install qt libusb pkg-config
git clone https://github.com/radiomanV/TL866
cd TL866/TL866_Updater/QT
qmake
make
cp -R TL866_Updater.app /Applications