strip.show(); crashes Arduino Nano ESP32 with Espressif ESP32 3.0.4 board

[ednieuw]

• Arduino board: Espressif ESP32 3.0.4

• Arduino IDE version: 1.8.19 and 2.3.2

Choose the Arduino Nano ESP32 from the Espressif esp32 board.
Partition Scheme: With FAT
Pin Numbering: By GPIO number (legacy)

Open examples-> Adafruit->RGBW strandtest
Compile and upload
The Nano ESP32 will crash immediately.

In my own program, that uses this library, the crash follows when using the strip.show(); command. The program starts up and runs well until the strip.show(); command is used and the MCU reboots.

NOTE:
When the Arduino ESP32 board is used the strip.show(); command works well.

[Dcmwrnd]

Me too, using Arduino IDE v1.8.19 & ESP32 Dev Module with Board Manager v3.0.4. Once strip.show(); is called the ESP32 reboot with error messages below. The same code compiled with Board Manager v2.0.17 without any problems.

Guru Meditation Error: Core 1 panic'ed (Unhandled debug exception).
Debug exception reason: Stack canary watchpoint triggered (loopTask)
Core 1 register dump:
PC : 0x400e52b3 PS : 0x00060036 A0 : 0x800e53fe A1 : 0x3ffaf0f0
A2 : 0x00000016 A3 : 0x3ffb9d0c A4 : 0x00000186 A5 : 0x3ffaf0f0
A6 : 0x3ffb0320 A7 : 0x3ffb21b0 A8 : 0x00088004 A9 : 0x00000091
A10 : 0x00008004 A11 : 0x00000004 A12 : 0x00000008 A13 : 0x00000008
A14 : 0x00000004 A15 : 0x00000004 SAR : 0x00000003 EXCCAUSE: 0x00000001
EXCVADDR: 0x00000000 LBEG : 0x400e5280 LEND : 0x400e52b7 LCOUNT : 0x00000003

Backtrace: 0x400e52b0:0x3ffaf0f0 0x400e53fb:0x3ffb21f0 0x400d52a2:0x3ffb2210 0x400d5321:0x3ffb2230 0x400d5706:0x3ffb2250 0x400e967c:0x3ffb2270 0x40090f3e:0x3ffb2290

ELF file SHA256: 44314907c87f7e0b

[ednieuw]

I wrote a library for the SK6812 and WS2812 LEDs
https://github.com/ednieuw/EdSoftLED

[ednieuw]

Still an issue with Neopixel version 1.12.3 and esp32 core 3.0.7 and 256 LEDs in strip