Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

LFO speed range twice too small #291

Open
mtarenskeen opened this issue May 22, 2021 · 2 comments
Open

LFO speed range twice too small #291

mtarenskeen opened this issue May 22, 2021 · 2 comments
Labels

Comments

@mtarenskeen
Copy link

A quote from the original DX7 manual:

"The LFO output can be varied in "speed" over a range from under 1 Hz to about 50 Hz"

According to my own measurements it goes to just below 48 Hz.
But now I measured Dexed output and it seems all LFO speed frequencies are a factor 2 too slow! The upper limit when LFS=99 that I measured using Dexed was 23.81 Hz. I have not checked the sourcecode (yet).

If Dexed wants to be as close as possible to a real DX7 I think this is a bug that should not be difficult to fix?

@flubber2077
Copy link

Confirming the quote is in the manual, and that Dexed currently maxes out at 23.81 Hz for the LFO. However I don't have a DX7 to test against.

@bryc
Copy link

bryc commented Jul 2, 2022

Not sure if this is related, but 0.9.6 has a noticeably different (faster) LFO period than 0.9.1.

I made sure both versions were set to "Modern" engine, opened the "LAURIE" patch, put Op4 level to 0, and played C4 on both:

(Also the reason I used "Modern" is that "Mark I" sounds different in 0.9.1 vs. 0.9.6 so they weren't comparable.)

dexedlfospeed.mp4

Edit: Ok this might be unrelated to the LFO and instead could be related to different 'Detune' behavior. Worth checking if it's a regression though.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

4 participants