mcu.cfg

[mcu]
serial: /dev/serial/by-id/usb-Klipper_stm32h723xx_410027000F51323431333839-if00

# ------ Corevus-G v0.4 Pin Aliases ###
[board_pins corevus-g] 
mcu: mcu
aliases:
# TMC2160 drivers
	M0_STEP = PG8,  M0_DIR = PG7, M0_EN = PG5,  M0_CS = PG6, M0_STALL = PG4,
	M1_STEP = PD15, M1_DIR = PG2, M1_EN = PD14, M1_CS = PG3, M1_STALL = PD13,
# Driver expansion ports
	M2A_STEP = PB12, M2A_DIR = PE12, M2A_EN = PE13, M2A_CS = PE14, M2A_STALL = PE15, M2A_UART = PE14,
	M2B_STEP = PD12, M2B_DIR = PD11, M2B_EN = PD10, M2B_CS = PD9,  M2B_STALL = PD8, M2B_UART = PD9,
	M3A_STEP = PF13, M3A_DIR = PF14, M3A_EN = PF15, M3A_CS = PG1,  M3A_STALL = PG0, M3A_UART = PG1,
	M3B_STEP = PE11, M3B_DIR = PE10, M3B_EN = PE9,  M3B_CS = PE8,  M3B_STALL = PE7, M3B_UART = PE8,
# TMC2209 drivers
	M4_STEP = PF11, M4_DIR = PC4,  M4_EN = PC5,  M4_UART = PF12,
	M5_STEP = PF3,  M5_DIR = PF1,  M5_EN = PF2,  M5_UART = PF4,
	M6_STEP = PC15, M6_DIR = PC13, M6_EN = PC14, M6_UART = PF0,
	M7_STEP = PE4,  M7_DIR = PE2,  M7_EN = PE3,  M7_UART = PE5,
# Heaters
	HB = PC6, H0 = PC7, H1 = PC8, H2 = PC9, H3 = PA8,
# Fans
	F0 = PB4, F1 = PB3, F0_FG = PC11, F1_FG = PC10,
	F2 = PB5, F3 = PG12, F4 = PA10, 
	F5 = PB6, F6 = PG13, F7 = PA15, 
	F8 = PB9, F9 = PB8, F10 = PE6, F11 = PB7,
# Thermistors
	T0 = PF10, T1 = PA1, T2 = PC2, T3 = PC3,
	T4 = PC0, T5 = PC1, T6 = PF5, T7 = PF6,
	M1_THERM = PB1, M2_THERM = PB0, M3_THERM = PF9,
	M4_THERM = PA4, 5V_THERM = PF7, 12V_THERM = PF8,
# Endstops
	S0 = PG10, S1 = PG15, S2 = PE0, S3 = PE1


[mcu supernova]
serial: /dev/serial/by-id/usb-Klipper_stm32f103xe_0B759C4000C0611913954807-if00
restart_method: command