This is a library to work with the radiation detector and spectrometer RadiaCode-101.
The project is still under development and not stable. Thus, the API might change in the future.
Example project (backend, frontend):
# install library together with all the dependencies for the examples, remove [examples] if you don't need them
$ pip3 install 'radiacode[examples]' --upgrade
# launch the webserver from the screenshot above
# bluetooth: replace with the address of your device
$ python3 -m radiacode-examples.webserver --bluetooth-mac 52:43:01:02:03:04
# or the same, but via usb
$ sudo python3 -m radiacode-examples.webserver
# simple example for outputting information to the terminal, options are similar to the webserver example
$ python3 -m radiacode-examples.basic
# send data to the public monitoring project narodmon.ru
$ python3 -m radiacode-examples.narodmon --bluetooth-mac 52:43:01:02:03:04
- install python poetry
- clone this repository
- install and run:
$ poetry install
$ poetry run python3 radiacode-examples/basic.py --bluetooth-mac 52:43:01:02:03:04 # or without --bluetooth-mac for USB connection
The library used to communicate over Bluetooh (bluepy) is not supported on MacOS. Only the USB connection is available on Apple devices. A USB Serial Number, obtainable from the Device Info menu on the device itself, can be specified if more than one Radiacode is connected via USB at the same time.
Make sure libusb is installed on your system, if you use Brew you can run: brew install libusb