Compilation errors

[ThailandCat]

Hi, my host machine is Apple M1 Mac. I done all hardware work, e.g. solder Serial header, backup original flash content then flashed the configuration provided. As I understand my next step to install configuration. But when I try to run Install, I got errors:

INFO ESPHome 2023.5.5
INFO Reading configuration /config/esphome/emporiavue2.yaml...
WARNING GPIO12 is a Strapping PIN and should be avoided.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
INFO Detected timezone 'Asia/Bangkok'
INFO Generating C++ source...
INFO Compiling app...
Processing emporiavue2 (board: esp32dev; framework: espidf; platform: platformio/[email protected])
--------------------------------------------------------------------------------
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - framework-espidf @ 3.40404.0 (4.4.4) 
 - tool-cmake @ 3.16.9 
 - tool-ninja @ 1.10.2 
 - toolchain-esp32ulp @ 2.35.0-20220830 
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
Reading CMake configuration...
-- The C compiler identification is GNU 8.4.0
-- The CXX compiler identification is GNU 8.4.0
-- The ASM compiler identification is GNU
-- Found assembler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc
-- Check for working C compiler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc
-- Check for working C compiler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc -- broken
-- Configuring incomplete, errors occurred!
See also "/data/emporiavue2/.pioenvs/emporiavue2/CMakeFiles/CMakeOutput.log".
See also "/data/emporiavue2/.pioenvs/emporiavue2/CMakeFiles/CMakeError.log".

fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Error at /data/cache/platformio/packages/tool-cmake/share/cmake-3.16/Modules/CMakeTestCCompiler.cmake:60 (message):
  The C compiler

    "/data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc"

  is not able to compile a simple test program.

  It fails with the following output:

    Change Dir: /data/emporiavue2/.pioenvs/emporiavue2/CMakeFiles/CMakeTmp
    
    Run Build Command(s):/data/cache/platformio/packages/tool-ninja/ninja cmTC_2abdb && [1/2] Building C object CMakeFiles/cmTC_2abdb.dir/testCCompiler.c.obj
    [2/2] Linking C executable cmTC_2abdb
    FAILED: cmTC_2abdb 
    : && /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc -mlongcalls -Wno-frame-address   CMakeFiles/cmTC_2abdb.dir/testCCompiler.c.obj  -o cmTC_2abdb   && :
    /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/../lib/gcc/xtensa-esp32-elf/8.4.0/../../../../xtensa-esp32-elf/bin/ld: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/../libexec/gcc/xtensa-esp32-elf/8.4.0/liblto_plugin.so: error loading plugin: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/../libexec/gcc/xtensa-esp32-elf/8.4.0/liblto_plugin.so: cannot open shared object file: No such file or directory
    collect2: error: ld returned 1 exit status
    ninja: build stopped: subcommand failed.
    
    

  

  CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
  /data/cache/platformio/packages/framework-espidf/tools/cmake/project.cmake:296 (__project)
  CMakeLists.txt:3 (project)



========================== [FAILED] Took 9.16 seconds ==========================

[clowrey]

This code does not compile on Arm - you need x86 environment - it's discussed elsewhere if you search - I'm guessing thats your issue.

[ThailandCat]

So, practically I need to get x86 machine to install HA + ESPHome on it, just for this task. Understand. Thank you again

[ThailandCat]

Looks like I found solution - I can install HA on Synology NAS which is have intel CPU.

[flaviut]

Canonical answer here: #105