Couple questions on phases and multi pole breakers

[eblohm]

Bought 2 Vue 3s in their black friday combo pack and had a couple questions on setting up the yaml file -

1. I've got a 200amp single phase panel, but have 3 wires coming in (2 energized, 1 neutral) are both of the energized wires considered their own phase for the Vue 3? I believe that's the case, but I'd rather not have to open the Vue 3 back up once I've got everything flashed and set up.
2. I bought 2 so I could monitor every breaker in my 30 breaker box. For my multi-pole breakers, do I set those up as if each one is it's own circuit? (Ie, I have 1 50amp breaker in spots 19/21 on my panel, do I list circuit 19 and 21 separately and exclude the multiplier?)

Thanks!

Side note - anyone have any tips for opening up the smart outlets so I can flash tasmota?

[flaviut]

I'd rather not have to open the Vue 3 back up

absolutely not a problem. You can reflash it wirelessly all you want once you do the initial flash. There's no stress at all about getting it right the first time.

For my multi-pole breakers, do I set those up as if each one is it's own circuit?

You've got a good plan here! You can also try and get fancy with template sensors to add things together.

anyone have any tips for opening up the smart outlets

My recollection is that you're better off with pretty much any other smart outlet when it comes to reflashing.