Wifi Doesn't Connect

[stratus-ss]

I have 2 Vues, the first one is working as expected. The second one seems to loop over connecting to the wifi. I am not exactly sure how to proceed. I see this being repeated

[21:48:06][D][esp-idf:000]: I (180) wifi:
[21:48:06][D][esp-idf:000]: wifi driver task: 3ffc92a4, prio:23, stack:6656, core=0
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (916) system_api: Base MAC address is not set
[21:48:06]
[21:48:06][D][esp-idf:000]: I (916) system_api: read default base MAC address from EFUSE
[21:48:06]
[21:48:06][D][esp-idf:000]: I (943) wifi:
[21:48:06][D][esp-idf:000]: wifi firmware version: eb52264
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (944) wifi:
[21:48:06][D][esp-idf:000]: wifi certification version: v7.0
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (956) wifi:
[21:48:06][D][esp-idf:000]: config NVS flash: enabled
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (966) wifi:
[21:48:06][D][esp-idf:000]: config nano formating: disabled
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (977) wifi:
[21:48:06][D][esp-idf:000]: Init data frame dynamic rx buffer num: 32
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (997) wifi:
[21:48:06][D][esp-idf:000]: Init management frame dynamic rx buffer num: 32
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1007) wifi:
[21:48:06][D][esp-idf:000]: Init management short buffer num: 32
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1018) wifi:
[21:48:06][D][esp-idf:000]: Init dynamic tx buffer num: 32
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1028) wifi:
[21:48:06][D][esp-idf:000]: Init static rx buffer size: 1600
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1038) wifi:
[21:48:06][D][esp-idf:000]: Init static rx buffer num: 10
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1058) wifi:
[21:48:06][D][esp-idf:000]: Init dynamic rx buffer num: 32
[21:48:06][D][esp-idf:000]: 
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1069) wifi_init: rx ba win: 6
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1070) wifi_init: tcpip mbox: 32
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1070) wifi_init: udp mbox: 6
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1079) wifi_init: tcp mbox: 6
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1089) wifi_init: tcp tx win: 5744
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1089) wifi_init: tcp rx win: 5744
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1100) wifi_init: tcp mss: 1440
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1110) wifi_init: WiFi IRAM OP enabled
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1110) wifi_init: WiFi RX IRAM OP enabled
[21:48:06]
[21:48:06][D][esp-idf:000]: I (1121) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
[21:48:06]
[21:48:06][D][esp-idf:000]: W (1131) phy_init: failed to load RF calibration data (0xffffffff), falling back to full calibration

This is the config (excluding the actual emporia config which is just cut/paste out of the gist)

esphome:
  name: solarvue2

external_components:
  - source: github://flaviut/esphome@emporia-vue
    components: [ emporia_vue ]

esp32:
  board: esp32dev
  framework:
    type: esp-idf
    version: recommended

# Enable Home Assistant API
api: {"password": "APIpassword!"}
ota: {"password": "OTApassword"}

# Enable logging
logger:

wifi:
  ssid: "SomeAP"
  password: "SomePW"

i2c:
  sda: 21
  scl: 22
  scan: false
  frequency: 200kHz  # recommended range is 50-200kHz
  id: i2c_a
time:
  - platform: homeassistant
    id: esptime

anyone have some points of what I can try?

[stratus-ss]

This was answered in Discussion #3

Sorry for the noise