Calibration complete, still showing power readings when there is no grid draw

[Azimuth0r]

Hi, i've completed the voltage calibration and I'm pretty much spot on. The issue I have is that I see values of 150W to 200W for incoming grid power on each phase when I should see 0W incoming (running off enphase battery backup)
I'm using the following sensors:

    ct_clamps:

# Phases with Return to Grid - No Filter
      - phase_id: phase_a
        input: "A"  # Verify the CT going to this device input also matches the phase/leg
        power:
          name: "Phase A Power"
          id: phase_a_power
          device_class: power
          filters: [*moving_avg]

      - phase_id: phase_b
        input: "B"  # Verify the CT going to this device input also matches the phase/leg
        power:
          name: "Phase B Power"
          id: phase_b_power
          device_class: power
          filters: [*moving_avg]

# Phases with no Return to Grid - Filter out Negitive
      - phase_id: phase_a
        input: "A"  # Verify the CT going to this device input also matches the phase/leg
        power:
          name: "Phase A Power - Positive"
          id: phase_a_power_positive
          device_class: power
          filters: [*moving_avg, *pos]

      - phase_id: phase_b
        input: "B"  # Verify the CT going to this device input also matches the phase/leg
        power:
          name: "Phase B Power - Positive"
          id: phase_b_power_positive
          device_class: power
          filters: [*moving_avg, *pos]






# Power with Return to Grid - No Filter
  - platform: template
    name: "Total Power"
    lambda: return id(phase_a_power).state + id(phase_b_power).state;
    update_interval: 1s
    id: total_power
    unit_of_measurement: "W"

# Power with no Return to Grid - Filter out Negitive
  - platform: template
    name: "Total Power without Return"
    lambda: return id(phase_a_power_positive).state + id(phase_b_power_positive).state;
    update_interval: 1s
    id: total_power_positive
    unit_of_measurement: "W"

# Total House Watts Positive Reading
  - platform: template
    name: Total Power from Grid
    id: total_power_from_grid
    lambda: |-
      if (id(total_power_positive).state < 0) {
        return 0;
      } else {
        return id(total_power_positive).state ;
      }
    accuracy_decimals: 1
    unit_of_measurement: "W"
    device_class: power
    update_interval: 1s


 # Total House Watts Negitive Reading   
  - platform: template
    name: "Total Power to Grid"
    id: total_power_to_grid
    lambda: |-
      if (id(total_power).state > 0) {
        return 0;
      } else {
        return abs(id(total_power).state) ;
      }
    accuracy_decimals: 1
    unit_of_measurement: "W"
    device_class: power
    update_interval: 1s

[flaviut]

This doesn't seem like a phase mismatch issue, so the only thing I can suggest for you to do is to place a clamp multimeter on the incoming power lines to confirm if reality matches what you're expecting.