A rule returns feedback on a specific level: Error, Warning or Informational.
Errors will start with the letter E. Errors will (or can) result in a hard failure for the template being validated.
Warnings start with the letter W. Warnings alert you when the template doesn't follow best practices but should still function. Example: If you use a parameter for a RDS master password you should have the parameter property NoEcho set to true.
Informational results start with the letter I. Informational alert you when the template doesn't follow best practices, just like the Warnings, but in a non-blocking way. The Informational level is disabled by default and has to be enabled explicitly using -c I or --include-checks I.
| Rule Numbers | Category |
|---|---|
| (E|W|I)0XXX | Basic Template Errors. Examples: Not parseable, main sections (Outputs, Resources, etc.) |
| (E|W|I)1XXX | Functions (Ref, GetAtt, etc.) |
| (E|W|I)2XXX | Parameters |
| (E|W|I)3XXX | Resources |
| (E|W|I)4XXX | Metadata |
| (E|W|I)6xxx | Outputs |
| (E|W|I)7xxx | Mappings |
| (E|W|I)8xxx | Conditions |
| (E|W|I)9xxx | Reserved for users rules |
Warning
Rule E3012 is used to check the types for value of a resource property. A number is a number, string is a string, etc. There are occasions where this could be just a warning and other times it could be an error. cfn-lint doesn't have an exception process so all instances of this issue are considered errors. You can disable this rule using --ignore-checks if it is not required for your internal best practices.
Sometimes there are (new) rules that might be complex, that doesn't have enough solid test templates and examples and/or might have unexpected results. We support adding in these rules so they can be tested, tweaked and improved before they become generally available.
A rule can be marked as experimental by setting the experimental flag in the Rule's MetaData:
class MyExperimentalRule(CloudFormationLintRule):
id = 'E1234'
...
experimental = TrueTo include these rules, use the -e/include-experimental argument when running cfn-lint.
The following 120 rules are applied by this linter: (This documentation is generated from the Rules, do not alter this manually)
| Rule ID | Title | Description | Config (Name:Type:Default) |
Source | Tags |
|---|---|---|---|---|---|
| E0000 | Parsing error found when parsing the template | Checks for Null values and Duplicate values in resources | Source | base |
|
| E0001 | Error found when transforming the template | Errors found when performing transformation on the template | Source | base,transform |
|
| E0002 | Error processing rule on the template | Errors found when processing a rule on the template | Source | base,rule |
|
| E1001 | Basic CloudFormation Template Configuration | Making sure the basic CloudFormation template components are properly configured | Source | base |
|
| E1002 | Template size limit | Check the size of the template is less than the upper limit | Source | limits |
|
| E1003 | Template description limit | Check if the size of the template description is less than the upper limit | Source | limits |
|
| E1004 | Template description can only be a string | Template description can only be a string | Source | description |
|
| E1010 | GetAtt validation of parameters | Validates that GetAtt parameters are to valid resources and properties of those resources | Source | functions,getatt |
|
| E1011 | FindInMap validation of configuration | Making sure the function is a list of appropriate config | Source | functions,findinmap |
|
| E1012 | Check if Refs exist | Making sure the refs exist | Source | functions,ref |
|
| E1015 | GetAz validation of parameters | Making sure the function not is of list | Source | functions,getaz |
|
| E1016 | ImportValue validation of parameters | Making sure the function not is of list | Source | functions,importvalue |
|
| E1017 | Select validation of parameters | Making sure the function not is of list | Source | functions,select |
|
| E1018 | Split validation of parameters | Making sure the split function is properly configured | Source | functions,split |
|
| E1019 | Sub validation of parameters | Making sure the sub function is properly configured | Source | functions,sub |
|
| E1020 | Ref validation of value | Making the Ref has a value of String (no other functions are supported) | Source | functions,ref |
|
| E1021 | Base64 validation of parameters | Making sure the function not is of list | Source | functions,base64 |
|
| E1022 | Join validation of parameters | Making sure the join function is properly configured | Source | functions,join |
|
| E1023 | Validation NOT function configuration | Making sure that NOT functions are list | Source | functions,not |
|
| E1024 | Cidr validation of parameters | Making sure the function CIDR is a list with valid values | Source | functions,cidr |
|
| E1026 | Cannot reference resources in the Conditions block of the template | Check that any Refs in the Conditions block uses no resources | Source | functions,ref |
|
| E1027 | Check dynamic references secure strings are in supported locations | Dynamic References Secure Strings are only supported for a small set of resource properties. Validate that they are being used in the correct location when checking values and Fn::Sub in resource properties. Currently doesn't check outputs, maps, conditions, parameters, and descriptions. | Source | functions,dynamic reference |
|
| E1028 | Check Fn::If structure for validity | Check Fn::If to make sure its valid. Condition has to be a string. | Source | functions,if |
|
| E1029 | Sub is required if a variable is used in a string | If a substitution variable exists in a string but isn't wrapped with the Fn::Sub function the deployment will fail. | Source | functions,sub |
|
| E2001 | Parameters have appropriate properties | Making sure the parameters are properly configured | Source | parameters |
|
| E2002 | Parameters have appropriate type | Making sure the parameters have a correct type | Source | parameters |
|
| E2003 | Parameters have appropriate names | Check if Parameters are properly named (A-Za-z0-9) | Source | parameters |
|
| E2004 | CIDR Allowed Values should be a Cidr Range | Check if a parameter is being used as a CIDR. If it is make sure allowed values are proper CIDRs | Source | parameters,cidr |
|
| E2010 | Parameter limit not exceeded | Check the number of Parameters in the template is less than the upper limit | Source | parameters,limits |
|
| E2011 | Parameter name limit not exceeded | Check the size of Parameter names in the template is less than the upper limit | Source | parameters,limits |
|
| E2012 | Parameter value limit not exceeded | Check if the size of Parameter values in the template is less than the upper limit | Source | parameters,limits |
|
| E2014 | Default value cannot use Refs | Check if Refs are not used in Parameter Defaults | Source | parameters |
|
| E2015 | Default value is within parameter constraints | Making sure the parameters have a default value inside AllowedValues, MinValue, MaxValue, AllowedPattern | Source | parameters |
|
| E2503 | Resource ELB Properties | See if Elb Resource Properties are set correctly HTTPS has certificate HTTP has no certificate | Source | properties,elb |
|
| E2504 | Check Ec2 Ebs Properties | See if Ec2 Eb2 Properties are valid | Source | properties,ec2,ebs |
|
| E2505 | Resource EC2 VPC Properties | Check if the default tenancy is default or dedicated and that CidrBlock is a valid CIDR range. | Source | properties,vpc |
|
| E2506 | Resource EC2 Security Group Ingress Properties | See if EC2 Security Group Ingress Properties are set correctly. Check that "SourceSecurityGroupId" or "SourceSecurityGroupName" are are exclusive and using the type of Ref or GetAtt | Source | resources,securitygroup |
|
| E2507 | Check if IAM Policies are properly configured | See if there elements inside an IAM policy are correct | Source | properties,iam |
|
| E2510 | Resource EC2 PropertiesEc2Subnet Properties | See if EC2 Subnet Properties are set correctly | Source | properties,subnet |
|
| E2520 | Check Properties that are mutually exclusive | Making sure CloudFormation properties that are exclusive are not defined | Source | resources |
|
| E2521 | Check Properties that are required together | Make sure CloudFormation resource properties are included together when required | Source | resources |
|
| E2522 | Check Properties that need at least one of a list of properties | Making sure CloudFormation properties that require at least one property from a list. More than one can be included. | Source | resources |
|
| E2523 | Check Properties that need only one of a list of properties | Making sure CloudFormation properties that require only one property from a list. One has to be specified. | Source | resources |
|
| E2529 | Check for duplicate Lambda events | Check if there are any duplicate log groups in the Lambda event trigger element. | Source | resources,lambda |
|
| E2530 | Check Lambda Memory Size Properties | See if Lambda Memory Size is valid | Source | resources,lambda |
|
| E2531 | Check if EOL Lambda Function Runtimes are used | Check if an EOL Lambda Runtime is specified and give an error if used. | Source | resources,lambda,runtime |
|
| E2532 | Check State Machine Definition for proper syntax | Check the State Machine String Definition to make sure its JSON. Validate basic syntax of the file to determine validity. | Source | resources,stepfunctions |
|
| E2540 | CodePipeline Stages | See if CodePipeline stages are set correctly | Source | properties,codepipeline |
|
| E2541 | CodePipeline Stage Actions | See if CodePipeline stage actions are set correctly | Source | resources,codepipeline |
|
| E3001 | Basic CloudFormation Resource Check | Making sure the basic CloudFormation resources are properly configured | Source | resources |
|
| E3002 | Resource properties are valid | Making sure that resources properties are properly configured | Source | resources |
|
| E3003 | Required Resource Parameters are missing | Making sure that Resources properties that are required exist | Source | resources |
|
| E3004 | Resource dependencies are not circular | Check that Resources are not circularly dependent by Ref, Sub, or GetAtt | Source | resources,circularly |
|
| E3005 | Check DependsOn values for Resources | Check that the DependsOn values are valid | Source | resources,dependson |
|
| E3006 | Resources have appropriate names | Check if Resources are properly named (A-Za-z0-9) | Source | resources |
|
| E3008 | Check values of properties for valid Refs and GetAtts | Checks resource properties for Ref and GetAtt values | Source | resources |
|
| E3010 | Resource limit not exceeded | Check the number of Resources in the template is less than the upper limit | Source | resources,limits |
|
| E3011 | Resource name limit not exceeded | Check the size of Resource names in the template is less than the upper limit | Source | resources,limits |
|
| E3012 | Check resource properties values | Checks resource property values with Primitive Types for values that match those types. | strict:boolean:True | Source | resources |
| E3013 | CloudFront Aliases | CloudFront aliases should contain valid domain names | Source | properties,cloudfront |
|
| E3016 | Check the configuration of a resources UpdatePolicy | Make sure a resources UpdatePolicy is properly configured | Source | resources,updatepolicy |
|
| E3020 | Validate Route53 RecordSets | Check if all RecordSets are correctly configured | Source | resources,route53,record_set |
|
| E3021 | Check Events Rule Targets are less than or equal to 5 | CloudWatch Events Rule can only support up to 5 targets | Source | resources,events |
|
| E3022 | Resource SubnetRouteTableAssociation Properties | Validate there is only one SubnetRouteTableAssociation per subnet | Source | resources,subnet,route table |
|
| E3023 | Validate that AlarmIdentifier is specified when using CloudWatch Metrics | When using a CloudWatch Metric for Route53 Health Checks you must also specify the AlarmIdentifier | Source | resources,route53,alarm_identifier |
|
| E3024 | Validate that ProvisionedThroughput is not specified with BillingMode PAY_PER_REQUEST | When using ProvisionedThroughput with BillingMode PAY_PER_REQUEST will result in BillingMode being changed to PROVISIONED | Source | resources,dynamodb,provisioned_throughput,billing_mode |
|
| E3025 | RDS instance type is compatible with the RDS type | Check the RDS instance types are supported by the type of RDS engine. Only if the values are strings will this be checked. | Source | resources,rds |
|
| E3026 | Check Elastic Cache Redis Cluster settings | Evaluate Redis Cluster groups to make sure automatic failover is enabled when cluster mode is enabled | Source | resources,elasticcache |
|
| E3027 | Validate AWS Event ScheduleExpression format | Validate the formation of the AWS::Event ScheduleExpression | Source | resources,events |
|
| E3030 | Check if properties have a valid value | Check if properties have a valid value in case of an enumator | Source | resources,property,allowed value |
|
| E3031 | Check if property values adhere to a specific pattern | Check if properties have a valid value in case of a pattern (Regular Expression) | Source | resources,property,allowed pattern,regex |
|
| E3032 | Check if a list has between min and max number of values specified | Check lists for the number of items in the list to validate they are between the minimum and maximum | Source | resources,property,list,size |
|
| E3033 | Check if a string has between min and max number of values specified | Check strings for its length between the minimum and maximum | Source | resources,property,string,size |
|
| E3034 | Check if a number is between min and max | Check numbers (integers and floats) for its value being between the minimum and maximum | Source | resources,property,number,size |
|
| E3035 | Check DeletionPolicy values for Resources | Check that the DeletionPolicy values are valid | Source | resources,deletionpolicy |
|
| E3036 | Check UpdateReplacePolicy values for Resources | Check that the UpdateReplacePolicy values are valid | Source | resources,updatereplacepolicy |
|
| E3037 | Check if a list has duplicate values | Certain lists don't support duplicate items. Check when duplicates are provided but not supported. | Source | resources,property,list |
|
| E3038 | Check if Serverless Resources have Serverless Transform | Check that a template with Serverless Resources also includes the Serverless Transform | Source | resources,transform |
|
| E3050 | Check if REFing to a IAM resource with path set | Some resources don't support looking up the IAM resource by name. This check validates when a REF is being used and the Path is not '/' | Source | properties,iam |
|
| E3502 | Check if a JSON Object is within size limits | Validate properties that are JSON values so that their length is within the limits | Source | resources,limits,json |
|
| E4001 | Metadata Interface have appropriate properties | Metadata Interface properties are properly configured | Source | metadata |
|
| E6001 | Outputs have appropriate properties | Making sure the outputs are properly configured | Source | outputs |
|
| E6002 | Outputs have required properties | Making sure the outputs have required properties | Source | outputs |
|
| E6003 | Outputs have values of strings | Making sure the outputs have strings as values | Source | outputs |
|
| E6004 | Outputs have appropriate names | Check if Outputs are properly named (A-Za-z0-9) | Source | outputs |
|
| E6005 | Outputs descriptions can only be strings | Outputs descriptions can only be strings | Source | outputs |
|
| E6010 | Output limit not exceeded | Check the number of Outputs in the template is less than the upper limit | Source | outputs,limits |
|
| E6011 | Output name limit not exceeded | Check the size of Output names in the template is less than the upper limit | Source | outputs,limits |
|
| E6012 | Output description limit not exceeded | Check the size of Output description in the template is less than the upper limit | Source | outputs,limits |
|
| E7001 | Mappings are appropriately configured | Check if Mappings are properly configured | Source | mappings |
|
| E7002 | Mappings have appropriate names | Check if Mappings are properly named (A-Za-z0-9) | Source | mapping |
|
| E7003 | Mapping keys are strings and alphanumeric | Check if Mappings keys are properly typed as strings and alphanumeric | Source | mapping |
|
| E7010 | Mapping limit not exceeded | Check the number of Mappings in the template is less than the upper limit | Source | mappings,limits |
|
| E7011 | Mapping name limit not exceeded | Check the size of Mapping names in the template is less than the upper limit | Source | mappings,limits |
|
| E7012 | Mapping attribute limit not exceeded | Check if the amount of Mapping attributes in the template is less than the upper limit | Source | mappings,limits |
|
| E8001 | Conditions have appropriate properties | Check if Conditions are properly configured | Source | conditions |
|
| E8002 | Check if the referenced Conditions are defined | Making sure the used conditions are actually defined in the Conditions section | Source | conditions |
|
| E8003 | Check Fn::Equals structure for validity | Check Fn::Equals is a list of two elements | Source | functions,equals |
|
| E8004 | Check Fn::And structure for validity | Check Fn::And is a list of two elements | Source | functions,and |
|
| E8005 | Check Fn::Not structure for validity | Check Fn::Not is a list of two elements | Source | functions,not |
|
| E8006 | Check Fn::Or structure for validity | Check Fn::Or is a list of two elements | Source | functions,or |
|
| I3011 | Check DynamoDB tables have a set DeletionPolicy | The default action when removing a DynamoDB Table is to delete it. This check requires you to specifically set a DeletionPolicy and you know the risks | Source | resources,dynamodb |
|
| I3037 | Check if a list that allows duplicates has any duplicates | Certain lists support duplicate items.Provide an alert when list of strings or numbers have repeats. | Source | resources,property,list |
|
| W1001 | Ref/GetAtt to resource that is available when conditions are applied | Check the Conditions that affect a Ref/GetAtt to make sure the resource being related to is available when there is a resource condition. | Source | resources,relationships |
|
| W1011 | FindInMap keys exist in the map | Checks the keys in a FindInMap to make sure they exist. Check only if the Map Name is a string and if the key is a string. | Source | functions,findinmap |
|
| W1019 | Sub validation of parameters | Validate that Fn::Sub Parameters are used | Source | functions,sub |
|
| W1020 | Sub isn't needed if it doesn't have a variable defined | Checks sub strings to see if a variable is defined. | Source | functions,sub |
|
| W2001 | Check if Parameters are Used | Making sure the parameters defined are used | Source | parameters |
|
| W2030 | Check if parameters have a valid value | Check if parameters have a valid value in case of an enumator. The Parameters allowed values is based on the usages in property (Ref) | Source | resources,property,allowed value |
|
| W2501 | Check if Password Properties are correctly configured | Password properties should be strings and if parameter using NoEcho | Source | parameters,passwords |
|
| W2506 | Check if ImageId Parameters have the correct type | See if there are any refs for ImageId to a parameter of inappropriate type. Appropriate Types are [AWS::EC2::Image::Id, AWS::SSM::Parameter::ValueAWS::EC2::Image::Id] | Source | parameters,imageid |
|
| W2509 | CIDR Parameters have allowed values | Check if a parameter is being used as a CIDR. If it is make sure it has allowed values regex comparisons | Source | parameters,availabilityzone |
|
| W2510 | Parameter Memory Size attributes should have max and min | Check if a parameter that is used for Lambda memory size should have a min and max size that matches Lambda constraints | Source | parameters,lambda |
|
| W2511 | Check IAM Resource Policies syntax | See if the elements inside an IAM Resource policy are configured correctly. | Source | properties,iam |
|
| W2531 | Check if EOL Lambda Function Runtimes are used | Check if an EOL Lambda Runtime is specified and give a warning if used. | Source | resources,lambda,runtime |
|
| W3002 | Warn when properties are configured to only work with the package command | Some properties can be configured to only work with the CloudFormationpackage command. Warn when this is the case so user is aware. | Source | resources |
|
| W3005 | Check obsolete DependsOn configuration for Resources | Check if DependsOn is specified if not needed. A Ref or a Fn::GetAtt already is an implicit dependency. | Source | resources,dependson |
|
| W3010 | Availability Zone Parameters should not be hardcoded | Check if an Availability Zone property is hardcoded. | Source | parameters,availabilityzone |
|
| W4001 | Metadata Interface parameters exist | Metadata Interface parameters actually exist | Source | metadata |
|
| W6001 | Check Outputs using ImportValue | Check if the Output value is set using ImportValue, so creating an Output of an Output | Source | outputs,importvalue |
|
| W7001 | Check if Mappings are Used | Making sure the mappings defined are used | Source | conditions |
|
| W8001 | Check if Conditions are Used | Making sure the conditions defined are used | Source | conditions |
| Rule ID | Title | Description | Source | Tags |
|---|---|---|---|---|
| W3037 | Check IAM Permission configuration | Check for valid IAM Permissions | Source |