PXP Agent

This is the agent for the PCP Execution Protocol (PXP), based on the the Puppet Communications Protocol (PCP). It enables the execution of actions on remote nodes.

The PCP interface is provided by cpp-pcp-client which, in turn, relies on websocket++.

pxp-agent needs to be connected to a PCP broker to operate; please refer to the documentation below for how to do that.

Dependencies

a C++11 compiler (clang/gcc 4.7)
gnumake
CMake
Boost
OpenSSL
ruby (2.0 and newer)
leatherman (0.5.1 or newer)
cpp-pcp-client (master)

Initial Setup

Setup on Fedora 23

The following will install all required tools and libraries:

yum install boost-devel openssl-devel gcc-c++ make wget tar cmake

Setup on Mac OSX El Capitan (homebrew)

This assumes Clang is installed and the system OpenSSL libraries will be used.

The following will install all required libraries:

brew install cmake boost

Setup on Ubuntu 15.10 (Trusty)

The following will install most required tools and libraries:

apt-get install build-essential libboost-all-dev libssl-dev wget tar cmake

Setup on Windows

MinGW-w64 is used for full C++11 support, and Chocolatey can be used to install. You should have at least 2GB of memory for compilation.

install CMake & 7zip
```
  choco install cmake 7zip.commandline
```

install MinGW-w64

  choco install mingw --params "/threads:win32"

For the remaining tasks, build commands can be executed in the shell from:

    Start > MinGW-w64 project > Run Terminal

select an install location for dependencies, such as C:\tools or cmake\release\ext; we'll refer to it as $install

build Boost

  .\bootstrap mingw
  .\b2 toolset=gcc --build-type=minimal install --prefix=$install --with-program_options --with-system --with-filesystem --with-date_time --with-thread --with-regex --with-log --with-locale --with-chrono boost.locale.iconv=off

In Powershell:

choco install cmake 7zip.commandline -y
choco install mingw --params "/threads:win32" -y
$env:PATH = "C:\tools\mingw64\bin;$env:PATH"
$install = "C:\tools"

(New-Object Net.WebClient).DownloadFile("https://downloads.sourceforge.net/boost/boost_1_54_0.7z", "$pwd/boost_1_54_0.7z")
7za x boost_1_54_0.7z
pushd boost_1_54_0
.\bootstrap mingw
.\b2 toolset=gcc --build-type=minimal install --prefix=$install --with-program_options --with-system --with-filesystem --with-date_time --with-thread --with-regex --with-log --with-locale --with-chrono boost.locale.iconv=off
popd

Build

build & install leatherman
build & install cpp-pcp-client
build the pxp-agent

Thanks to the CMake, the project can be built out-of-source tree, which allows for multiple independent builds. Aside from the standard CMake switches the build supports the following option:
- DEV_LOG_COLOR enables colorization for logging (development setting) (default OFF)
example release build:
```
mkdir release
cd release
cmake ..
make
```
example debug/test build:
```
mkdir debug
cd debug
cmake -DCMAKE_BUILD_TYPE=Debug -DDEV_LOG_COLOR=ON ..
make
```
NOTE: If the versions of OpenSSL and libcurl conflict with each other, curl may fail to load SSL files. On macOS this is common when using Homebrew. Invoke cmake with the following commands to use the Homebrew versions of OpenSSL and libcurl: cmake -DCMAKE_PREFIX_PATH="/usr/local/opt/openssl;/usr/local/opt/curl" ..

Usage

Starting the agent

pxp-agent should be configured in your system to be executed automatically as a service. In case you need to run it manually, you can invoke directly its executable file; after building from source, it is located in the ./build/bin directory; in case an installer was used, the default locations are:

*nix: /opt/puppetlabs/puppet/bin/pxp-agent
Windows: C:\Program Files\Puppet Labs\Puppet\pxp-agent\bin\pxp-agent.exe

Configuration options can be passed as command line arguments or by using a configuration file (see below).

The agent will execute as a background process by default; in that case, it prevents multiple instances running at the same time. Please refer to the following sections for platform-specific behavior.

*nix

In case --foreground is unflagged, pxp-agent will start as a daemon and its PID will be stored in /var/run/puppetlabs/pxp-agent.pid, or in another location if specified by --pidfile. pxp-agent will rely on such file to prevent multiple daemon instances from executing at once. The PID file will be removed if the daemon is stopped by using one of SIGINT, SIGTERM, or SIGQUIT signals.

Windows

pxp-agent relies on nssm to execute as a service. In case --foreground is unflagged, a mutex-based mechanism will prevent multiple instances of pxp-agent. Note that no PID file will be created.

Exit code

In POSIX, when the daemon is successfully instantiated, the parent process returns 0. In case of a daemonization failure, it returns 4.

In case of it fails to parse the command line options or the configuration file, pxp-agent returns 2.

In case of invalid configuration, say an option is set to an invalid value, it returns 3.

For all other failures it returns 1.

Modules

Actions are grouped in modules, by which they can be loaded and configured within pxp-agent. An example of module is given by the Puppet module; a trivial one is the reverse module that is used for testing.

Modules interface

A module is a file that provides an interface to retrieve information about its actions (we call such information metadata - it's a set of JSON schemas) and to execute actions.

The metadata is used by pxp-agent to acquire knowledge about the module's actions and validate its configuration. For each action, the metadata specifies the format of the input arguments and the output results. Please refer to this document for more details on requirements for modules.

To run a given action, pxp-agent invokes the module with the action name. The input specified in the PXP request and other parameters will be then passed to the module via stdin.

pxp-agent invokes modules directly, as executables. For determining the paths of the executables, pxp-agent will inspect the --modules-dir directory and look for:

POSIX: files without any suffix;
Windows: files with ".bat" extension.

Note that the transaction status module is implemented natively; there is no module file for it. Also, as a side note, status query requests must be of blocking.

Modules configuration

Modules can be configured by placing a configuration file in the --modules-config-dir named like <module_name>.conf. The content of a configuration file must be in JSON format and conform with the configuration schema provided by the module's metadata, otherwise the module will not be loaded.

Configuring the agent

The PXP agent is configured with a config file. The values in the config file can be overridden by supplying arguments on the command line.

The agent will look for the default config file in:

*nix: /etc/puppetlabs/pxp-agent/pxp-agent.conf
Windows: C:\ProgramData\PuppetLabs\pxp-agent\etc\pxp-agent.conf

A different config file can be specified by passing the --config-file option.

The config files use the JSON format. Options must be specified as entries of a single JSON object. Example:

{
    "broker-ws-uris" : ["wss://pcp_broker_cn:8142/pcp/", "wss://pcp_alt_broker_cn:8142/pcp/"],
    "ssl-key" : "/etc/puppetlabs/puppet/ssl/private_keys/myhost.net.pem",
    "ssl-ca-cert" : "/etc/puppetlabs/puppet/ssl/certs/ca.pem",
    "ssl-cert" : "/etc/puppetlabs/puppet/ssl/certs/myhost.net.pem"
}

Note that you have to specify the WebSocket secure URI of the PCP broker and the certificate of the CA that is used by it, in order to establish the WebSocket connection on top of which the PCP communication will take place (PCP uses secure WebSocket). Also, the hostname used in the WebSocket URI must match the SSL identity used by the broker.

Testing against a test broker

The simple instructions for setting up a test PCP broker use pre- generated certs present in that repo. To connect to this test broker, you'll first need to add a hosts config that redirects broker.example.com to the broker host so that server certificate verification succeeds. Then point pxp-agent at ca and a client certificate present in PCP broker. Example:

puppet resource host broker.example.com ip=<host ip>
pxp-agent --broker-ws-uri wss://broker.example.com:8142/pcp \
          --ssl-ca-cert $pcp_broker/test-resources/ssl/certs/ca.pem \
          --ssl-cert $pcp_broker/test-resources/ssl/certs/client01.example.com.pem \
          --ssl-key $pcp_broker/test-resources/ssl/private_keys/client01.example.com.pem \
          --spool-dir dev-resources/spool \
          --modules-dir modules \
          --logfile - --loglevel debug --foreground

Logging

By default, log messages will be written to:

*nix: /var/log/puppetlabs/pxp-agent/pxp-agent.log
Windows: C:\ProgramData\PuppetLabs\pxp-agent\var\log\pxp-agent.log.

You can specify a different file with the --logfile option.

When running in foreground mode, it is possible to display log messages on console by using an hyphen instead of a file path: --logfile -.

The default log level is info. You can specify a different log level by using the --loglevel option with one of the following strings: none, trace, debug, info, warning, error, fatal.

PCP Access Logging

The pcp_access logger provides information about incoming PCP messages. You can enable it by setting the log-pcp-access flag.

The default location of the pcp_access log file is:

*nix: /var/log/puppetlabs/pxp-agent/pxp-access.log
Windows: C:\ProgramData\PuppetLabs\pxp-agent\var\log\pxp-access.log. You can specify a different file with the pcp-access-logfile option.

Each pcp_access entry is composed of 6 fields:

[<date time>] <access outcome> <broker: WS URI> <sender: PCP URI> <PCP messagetype> <PCP message id>

For example:

[2016-08-24 13:56:10.737760] AUTHORIZATION_SUCCESS wss://localhost:8142/pcp pcp:///server http://puppetlabs.com/associate_response 9766ba60-a51f-4910-9921-c76990aa9b38
[2016-08-24 14:07:51.859244] AUTHORIZATION_SUCCESS wss://localhost:8142/pcp/vNext pcp://peg.example.com/peg-controller http://puppetlabs.com/rpc_blocking_request a06e371a-08a2-47f0-913c-15780d668e2f

The second entry gives the outcome of the message validation; possible values are:

validation outcome	description
DESERIALIZATION_ERROR	invalid PCP message that can't be deserialized
AUTHORIZATION_SUCCESS	the message will be processed by pxp-agent

List of all configuration options

The PXP agent has the following configuration options

config-file (optional)

Specify which config file to use.

broker-ws-uri (required to connect)

The WebSocket URI of the PXP broker you wish to connect the agent to, in the wss://<broker identity>:8142/pcp/ format; example: wss://pcp_broker_cn:8142/pcp/

broker-ws-uris (alternative to broker-ws-uri)

A config file only alternative to broker-ws-uri, that takes an array specifying multiple brokers the agent can connect to. When multiple brokers are specified, it will use them in a failover capacity, where if it's unable to connect to one it will try the next in the list, and repeat until a successful connection is made. In the event of a disconnect, the agent will retry that connection before trying a new broker.

broker-ws-proxy (optional)

Proxy URI for websocket connection with PCP broker.

master-uris (optional)

An array of HTTPS URIs of servers hosting task files for download. When multiple are specified, it will use them in a failover capacity, where if it's unable to connect to one it will try the next in the list until all have been tried. If all are unavailable, task download will fail.

master-proxy (optional)

Proxy URI for downloading tasks from master.

pcp-version (optional)

Specifies whether to use PCP version 1 or 2. Only accepts '1' or '2'. Defaults to '1'.

connection-timeout (optional)

Maximum amount of time that may elapse when trying to establish a connection to the broker in seconds. Defaults to 5 seconds.

ssl-ca-cert (required to connect)

The location of your SSL Certificate Authority certificate, example /etc/puppet/ssl/ca/ca_crt.pem

ssl-cert (required to connect)

The location of the pxp-agent SSL certificate, example /etc/puppet/ssl/certs/bob_crt.pem

ssl-key (required to connect)

The location of the pxp-agent's SSL private key, example /etc/puppet/ssl/certs/bob_key.pem

ssl-crl (required for apply module)

The location of the pxp-agent's SSL certificate revocation list, example /etc/puppetlabs/puppet/ssl/crl.pem

logfile (optional)

The path of the log file.

loglevel (optional)

Specify one of the following logging levels: none, trace, debug, info, warning, error, or fatal; the default one is info

log-pcp-access (optional flag)

Enable PCP access logging; the default is false.

pcp-access-logfile (optional)

The path of the PCP access log file.

modules-dir (optional)

Specify the directory where modules are stored

modules-config-dir (optional)

Specify the directory containing the configuration files of modules

spool-dir (optional)

The location where the outcome of non-blocking requests will be stored; the default location is:

*nix: /opt/puppetlabs/pxp-agent/spool
Windows: C:\ProgramData\PuppetLabs\pxp-agent\var\spool

Note that if the specified spool directory does not exist, pxp-agent will create it when starting.

spool-dir-purge-ttl (optional)

Automatically delete results subdirectories located in the spool-dir directory that have a start timestamp that has expired in respect to the specified TTL. The TTL value must be an integer with one of the following suffixes:

'm' - minutes
'h' - hours
'd' - days

The default TTL value is "14d" (14 days). Specifying a 0, with any of the above suffixes, will disable the purge functionality. Note that the purge will take place when pxp-agent starts and will be repeated every hour or TTL, whichever is shorter.

task-cache-dir (optional)

The location where the tasks are cached; the default location is:

*nix: /opt/puppetlabs/pxp-agent/tasks-cache
Windows: C:\ProgramData\PuppetLabs\pxp-agent\tasks-cache

Note that if the specified task-cache directory does not exist, pxp-agent will create it when starting. It will also be recreated before attempting to download a task to it in case it was deleted without restarting pxp-agent.

task-cache-dir-purge-ttl (optional)

Automatically delete cached tasks located in the task-cache-dir directory that have a start timestamp that has expired in respect to the specified TTL. The TTL value must be an integer with one of the following suffixes:

'm' - minutes
'h' - hours
'd' - days

The default TTL value is "14d" (14 days). Specifying a 0, with any of the above suffixes, will disable the purge functionality. Note that the purge will take place when pxp-agent starts and will be repeated every hour or TTL, whichever is shorter.

foreground (optional flag)

Don't become a daemon and execute on foreground on the associated terminal.

*pidfile (optional; only on nix platforms)

The path of the PID file; the default is /var/run/puppetlabs/pxp-agent.pid

Contributing

Please refer to this document.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

PXP Agent

Dependencies

Initial Setup

Setup on Fedora 23

Setup on Mac OSX El Capitan (homebrew)

Setup on Ubuntu 15.10 (Trusty)

Setup on Windows

Build

Usage

Starting the agent

*nix

Windows

Exit code

Modules

Modules interface

Modules configuration

Configuring the agent

Testing against a test broker

Logging

PCP Access Logging

List of all configuration options

Contributing

Files

README.md

Latest commit

History

README.md

File metadata and controls

PXP Agent

Dependencies

Initial Setup

Setup on Fedora 23

Setup on Mac OSX El Capitan (homebrew)

Setup on Ubuntu 15.10 (Trusty)

Setup on Windows

Build

Usage

Starting the agent

*nix

Windows

Exit code

Modules

Modules interface

Modules configuration

Configuring the agent

Testing against a test broker

Logging

PCP Access Logging

List of all configuration options

Contributing