BOM.txt

Connectors:
1x MO4x2         Connection header
1x M04x2  female Connection jack
1x MO3x2     AVR PDI header
1x MO8x2     Eurorack power connector
3x erthenvar jacks

Semiconductors
1x QFP44     Atmel XMega 32A4U (TQFP)         (U1)
1x SOT23     MMBT3904 NPN Transistor          (Q101)
1x SOT223    MIC2920A-3.3BS regulator         (IC301)
2x SOIC-8    LF353D op amp                    (IC101, IC201)
2x SOD-323   5V zener diode                   (D301, D301)

Potentiometers
3x PDB12 100K PCB mount panel pot (PDB12-H4251-104BF)
1x 5mm   100K thru-hole trimpot (N6-L50T0C-100K)

Resistors
1x 0805 1    Resistor 5% (R102)
1x 0603 1K   Resistor 5% (R110)
5x 0603 10K  Resistor 5% (R101, R107, R108, R301, R302)
1x 0603 27K  Resistor 5% (R205)
1x 0603 33K  Resistor 5% (R208)
1x 0603 33K  Resistor 1% (R209)
1x 0603 51K  Resistor 1% (R207)
5x 0603 100K Resistor 5% (R104, R105, R202, R203, R206)
1x 0603 100K Resistor 1% (R201)
1x 0603 200K Resistor 5% (R103)
1x 0603 300K Resistor 5% (R109)
1x 0603 1M   Resistor 5% (R106)
1x 0603 1.5M Resistor 5% (R204)

Capacitors
1x 0603 220pF C0G capacitor      (C101)
3x 0603 .1uF  X7R capacitor      (C302, C303, C305)
1x 1210 .1uF  PPS capacitor      (C102)
2x 0805 1uF   X7R capacitor      (C103, C301) 
1x 1205 10uF  X5R capacitor      (C304)


Other TODOs- 
Make sure C103 does not have too much distortion during testing

Mouser link to project:
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=DEDAD2A673