Skip to content

Latest commit

 

History

History
105 lines (90 loc) · 4.93 KB

README.md

File metadata and controls

105 lines (90 loc) · 4.93 KB
Raw

This script generates and updates the OpenVPN config for Bitmask/Riseup VPN, so that the VPN can be used without the GUI client.

Please consider donating to Riseup for using their VPN!

Usage

The script requires the CA certificate to be stored in the current working directory as ca.pem, and will write bitmask.ovpn and cert.pem on successful completion to the current working directory:

# Create directory
mkdir riseup-vpn
cd riseup-vpn

# Download CA certificate
wget https://raw.githubusercontent.com/leapcode/bitmask-vpn/main/providers/riseup/riseup-ca.crt -O ca.pem

# Generate or update configuration and user certificate
/path/to/bitmask-openvpn.py

# Start OpenVPN
openvpn --config bitmask.ovpn

If the contents of the generated files changed, it restarts OpenVPN if running. It's recommended to run bitmask-openvpn.py daily (e.g. through a cronjob) but make sure to run it from the same directory that has the previously generated files.

Configuration

By default the script, uses Riseup's VPN gateways located in the US. In order to use a different Bitmask VPN provider, change the variable API_URL in the script, and download the respective CA certificate instead. In order to use gateways from a different region, change the variable COUNTRY_CODES in the script.

Note: Only anon authentification, and gateways of the type openvpn are supported.

Setup with split-vpn on Unifi gateway

This tutorial will configure a VLAN that routes all traffic through RiseupVPN on the UDM, UDM Pro, UDM-SE, UDR, or UXG.

  1. Follow instructions to install split-vpn.
    • Recommended: Set up split-vpn to run at boot. Otherwise, traffic will not go through the VPN after the gateway boots up again.
  2. Log into your Unifi gateway and create a new network:
    1. Network app -> Settings (gear icon) -> Networks -> Create New Network
    2. Disable Auto Scale Network
    3. Advanced Configuration -> DHCP Service Management -> DHCP DNS Server
      • Enable and set to 10.41.0.1 (this is the DNS server set by the official Bitmask client)
  3. SSH into the Unifi Gateway and create a directory with the OpenVPN configuration files: 
    mkdir -p /etc/split-vpn/openvpn/riseup
cd /etc/split-vpn/openvpn/riseup
cp /etc/split-vpn/vpn/vpn.conf.sample vpn.conf
wget https://raw.githubusercontent.com/leapcode/bitmask-vpn/main/providers/riseup/riseup-ca.crt -O ca.pem
wget https://raw.githubusercontent.com/snoack/bitmask-openvpn/main/bitmask-openvpn.py
chmod +x bitmask-openvpn.py
  4. Edit vpn.conf
    • Set FORCED_SOURCE_IPV4 matching the Host Address and Netmask set in step 2 (e.g. if Host Address is 192.168.5.1 and Netmask is 24, set FORCED_SOURCE_IPV4="192.168.5.0/24").
    • Make sure that ROUTE_TABLE, MARK, PREFIX, PREF, and DEV are unique from other VPNs configured.
    • Set KILLSWITCH=1 and REMOVE_KILLSWITCH_ON_EXIT=0. This prevents traffic from being leaked past the VPN if OpenVPN stops running.
    • Add follwing hook to the bottom of the file: 
      hooks_pre_up() {
    local script="/etc/cron.daily/bitmask-openvpn-$(basename $PWD)"
    if [ ! -f $script ]; then
      printf '#!/bin/sh\ncd %s\n./bitmask-openvpn.py' $PWD > $script
      chmod +x $script
    fi
    ./bitmask-openvpn.py
}
  5. Create run-vpn.sh wih following contents: 
    #!/bin/sh                                                                                            
cd $(dirname "$0")                                                                                   
. ./vpn.conf                                                                                         
/etc/split-vpn/vpn/updown.sh ${DEV} pre-up >pre-up.log 2>&1                                          
nohup openvpn --config bitmask.ovpn \                                                                
              --route-noexec --redirect-gateway def1 \                                               
              --up /etc/split-vpn/vpn/updown.sh \                                                    
              --down /etc/split-vpn/vpn/updown.sh \                                                  
              --dev-type tun --dev ${DEV} \                                                          
              --script-security 2 \                                                                  
              --mute-replay-warnings >openvpn.log 2>&1 &
  6. Give the run script executable permissions and run it once: 
    chmod +x run-vpn.sh
./run-vpn.sh
  7. If split-vpn was set up to run at boot, edit /etc/split-vpn/run-vpn.sh and add /etc/split-vpn/openvpn/riseup/run-vpn.sh on a new line.