Skip to content

Latest commit

 

History

History
233 lines (150 loc) · 9.83 KB

local-development.md

File metadata and controls

233 lines (150 loc) · 9.83 KB
Raw

Local Development

This document gives tips and tricks on how to run Renovate locally to add features or fix bugs. You can improve this documentation by opening a pull request. For example, if you think anything is unclear, or you think something needs to be added, open a pull request!

Installation

Prerequisites

You need the following dependencies for local development:

  • Git >=2.33.0
  • Node.js ^18.12.0 || >=20.0.0
  • pnpm ^8.6.11 (use corepack)
  • C++ compiler

We support Node.js versions according to the Node.js release schedule.

Linux

You can use the following commands on Ubuntu.

curl -sL https://deb.nodesource.com/setup_18.x | sudo -E bash -
sudo apt-get update
sudo apt-get install -y git build-essential nodejs
corepack enable

Nix

To enter a development shell with the necessary packages, run nix-shell --packages gcc gitFull nodejs and then corepack enable.

Windows

Follow these steps to set up your development environment on Windows 10. If you already installed a part, skip the corresponding step.

  • Install Git. Make sure you've configured your username and email

  • Install Node.js LTS

  • In an Administrator PowerShell prompt, run npm install -global npm and then npm --debug install --global windows-build-tools

  • Enable corepack: corepack enable

    You can see what versions you're using like this:

    PS C:\Windows\system32> git --version
PS C:\Windows\system32> node --version
PS C:\Windows\system32> pnpm --version

VS Code Dev Containers

If you are using VS Code you can skip installing the prerequisites and work in a development container instead.

The VS Code integrated terminal is now running in the container and can be used to run additional commands.

To build inside the container:

pnpm build

Local Docker

If, for some reason, you can't run the relevant versions on your local machine, you can run everything from a Docker image. To build the correct docker image:

docker build -f .devcontainer/Dockerfile -t renovatebot_local .

Then you can run pnpm directly from Docker, for instance:

docker run -it --rm -v "$PWD":/usr/src/app -w /usr/src/app renovatebot_local pnpm install

Fork and Clone

If you want to contribute to the project, you should first "fork" the main project using the GitHub website and then clone your fork locally. The Renovate project uses the pnpm package management system instead of npm.

To ensure everything is working properly on your end, you must:

  1. Install all dependencies with pnpm install
  2. Make a build with pnpm build, which should pass with no errors
  3. Verify all tests pass and have 100% test coverage, by running pnpm test
  4. Verify the installation by running pnpm start. You must see this error: You must configure a GitHub personal access token

Do not worry about the token error for now, as you will be given instructions on how to configure the token a little later down in this document.

You only need to do these steps once.

Before you submit a pull request you should:

  1. Install newer dependencies with pnpm install
  2. Run the tests with pnpm test

Platform Account Setup

Although it's possible to make small source code improvements without testing against a real repository, in most cases you should run a "real" test on a repository before you submit a feature or fix. It's possible to do this against GitHub, GitLab or Bitbucket public servers.

Register new account (optional)

If you're going to be doing a lot of Renovate development then it's recommended that you set up a dedicated test account on GitHub or GitLab, so that you reduce the risk that you accidentally cause problems when testing out Renovate.

e.g. if your GitHub username is "alex88" then maybe you register "alex88-testing" for use with Renovate.

Generate platform token

Once you have decided on your platform and account, log in and generate a "Personal Access Token" that can be used to authenticate Renovate. Select repo scope when generating the token.

Export platform token

Although you can specify a token to Renovate using --token=, it can be inconvenient if you need to include this every time. You are better off to instead export the Environment Variable RENOVATE_TOKEN for this.

Run against a real repo

To make sure everything is working, create a test repo in your account, e.g. like https://github.com/r4harry/testrepo1. Now, add a file called .nvmrc with the content 8.13.0. Now run against the test repo you created, e.g. pnpm start r4harry/testrepo1. If your token is set up correctly, you should find that Renovate created a "Configure Renovate" PR in the testrepo1.

If this is working then in future you can create other test repos to verify your code changes against.

Tests

You can run pnpm test locally to test your code. We test all PRs using the same tests, run on GitHub Actions. pnpm test runs an eslint check, a prettier check, a type check and then all the unit tests using jest.

Refactor PRs should ideally not change or remove tests (adding tests is OK).

Jest

Run the Jest unit tests with the pnpm jest command. You can also run a subset of the Jest tests using file matching, e.g. pnpm jest composer or pnpm jest workers/repository/update/branch. If you get a test failure due to a "snapshot" mismatch, and you are sure that you need to update the snapshot, then you can append -u to the end. e.g. pnpm jest composer -u would update the saved snapshots for all tests in **/composer/**.

Coverage

The Renovate project maintains 100% test coverage, so any Pull Request will fail if it does not have full coverage for code. Using // istanbul ignore is not ideal but sometimes is a pragmatic solution if an additional test wouldn't really prove anything.

To view the current test coverage locally, open up coverage/index.html in your browser.

Do not let coverage put you off submitting a PR! Maybe we can help, or at least guide. Also, it can be good to submit your PR as a work in progress (WIP) without tests first so that you can get a thumbs up from others about the changes, and write tests after.

Linting and formatting

We use Prettier to format our code. If your code fails pnpm test due to a prettier rule then run pnpm lint-fix to fix it or most eslint errors automatically before running pnpm test again. You usually don't need to fix any Prettier errors by hand.

If you're only working on the documentation files, you can use the pnpm doc-fix command to format your work.

Keeping your Renovate fork up to date

First of all, never commit to the main branch of your fork - always use a "feature" branch like feat/1234-add-yarn-parsing.

Make sure your fork is up-to-date with the Renovate main branch, check this each time before you create a new branch. To do this, see these GitHub guides:

Configuring a remote for a fork

Syncing a fork

Tips and tricks

Log files

Usually, debug is good enough to troubleshoot most problems or verify functionality.

It's usually easier to have the logs in a file that you can open with a text editor. You can use a command like this to put the log messages in a file:

LOG_LEVEL=debug pnpm start myaccount/therepo > debug.log

The example command will redirect/save Renovate's output to the debug.log file (and overwrite debug.log if it already exists).

Adding configuration options

We want stay backwards-compatible as much as possible, as well as make the code configurable. So most new functionality should be controllable via configuration options.

Create your new configuration option in the lib/config/options/index.ts file. Also create documentation for the option in the docs/usage/configuration-options.md file.

Debugging

Chrome's inspect tool

You can debug Renovate with Chrome's inspect tool. Here's an example:

  1. Open chrome://inspect in Chrome, then select "Open dedicated DevTools for Node"
  2. Add a debugger; statement somewhere in the source code where you want to start debugging
  3. Run Renovate using pnpm debug ... instead of pnpm start ...
  4. Select "Resume script execution" in Chrome DevTools and wait for your break point to be triggered

VS Code

You can also debug Renovate with VS Code. Here's an example:

  1. In the configuration file, e.g. config.js in the root directory of the project, add token with your Personal Access Token
  2. In the same configuration file, add repositories with the repository you want to test against. The file config.js would look something like this:
module.exports = {
  token: 'xxxxxxxx',
  repositories: ['r4harry/testrepo1'],
};
  1. Set a breakpoint somewhere in the source code and launch the application in debug mode with selected configuration as debug
  2. Wait for your breakpoint to be triggered