Tessel-IO

Tessel-IO is compatible with Tessel 2

Tessel-IO is an IO Plugin that enables writing JavaScript Robotics programs with Johnny-Five, that run on a Tessel 2. This project was built at Bocoup

Install & Setup

If you have prior experience with Johnny-Five, this is all you need:

npm install t2-cli tessel-io johnny-five

If you have limited prior experience with Johnny-Five, or are generally new to NodeBots, or just want to read more about how this all works together, you'll want to read Say 'Hello World' with Johnny-Five on Tessel 2

Boilerplate Program

var five = require("johnny-five");
var Tessel = require("tessel-io");
var board = new five.Board({
  io: new Tessel()
});

board.on("ready", function() {
  // Write your program locally and push to the Tessel 2 when ready!  
});

Deploying Your Program To Tessel 2

For testing, deploy to RAM:

t2 run <program file name>

When ready for use, deploy to flash:

t2 run <program file name>

Pin Naming Guide

There are two primary ports on the Tessel2: Port "A" and Port "B". There is also a bank of onboard LEDs which are controllable from a port we are calling "L". Note that "L0" and "L1" should be reserved for system functions (ERR and WLAN) so you should avoid using them. Instead, consider using "L2" and "L3" which are intended to be more informational in nature.

Port	Number	Johnny-Five Compatible Name
A	0	"a0" or "A0"
A	1	"a1" or "A1"
A	2	"a2" or "A2"
A	3	"a3" or "A3"
A	4	"a4" or "A4"
A	5	"a5" or "A5"
A	6	"a6" or "A6"
A	7	"a7" or "A7"
B	0	"b0" or "B0"
B	1	"b1" or "B1"
B	2	"b2" or "B2"
B	3	"b3" or "B3"
B	4	"b4" or "B4"
B	5	"b5" or "B5"
B	6	"b6" or "B6"
B	7	"b7" or "B7"
L	0	"l0" or "L0"
L	1	"l1" or "L1"
L	2	"l2" or "L2"
L	3	"l3" or "L3"

See examples for basic, non-Johnny-Five examples.

Pin Capabilities Guide

Originally written for Tessel 2's Firmware Docs

Port	Pin	Digital I/O	SCL	SDA	TX	RX	Analog In	Analog Out	Interrupt	PWM
A	0	✓	✓
A	1	✓		✓
A	2	✓							✓
A	3	✓
A	4	✓					✓
A	5	✓			✓				✓	✓
A	6	✓				✓			✓	✓
A	7	✓					✓		✓
B	0	✓	✓				✓
B	1	✓		✓			✓
B	2	✓					✓		✓
B	3	✓					✓
B	4	✓					✓
B	5	✓			✓		✓		✓	✓
B	6	✓				✓	✓		✓	✓
B	7	✓					✓	✓	✓

Examples

There are several examples of how to use this library in its raw form. Make sure you have installed the Tessel 2 CLI and provisioned the board first. After that is complete, you can run any of the examples:

t2 run eg/onboard-led.js

This is an early "platform preview" and is not yet guaranteed to function correctly. Please report any bugs or issues that you encounter!