Portals 4 Reference Implementation
----------------------------------

* About

* Building

Portals utilizes the Autoconf/Automake/Libtool build system.  The
standard GNU configure script ane make system is used to build Portals
4.  To build:

  % autoreconf                   (only once, or when the build system has been updated)
  % ./configure <options>
  % make
  % make check
  % make install

The "make check" step is not strictly necessary, but is a good idea.

Options to configure include:

  --prefix=<DIR>          Install implementation in <DIR>


* Portals 4 Implementation Notes

  There is currently one Portals 4 implementation, ib.  The ib
  implementation supports multiple transports, including InfiniBand,
  UDP/Reliable UDP (experimental), and SHMEM.

  - Infiniband: this transport has multiple options, including not actualling using IB:
      * Infiniband, selected by default, can be disabled with --disable-transport-ib

      * shared memory, not selected by default, can be enabled with
        --enable-transport-shmem. It has the option of using KNEM for the
        large transfer (used if --with-knem=xxxx is present), or to
        use an internal slower shared memory protocol.

      Both Infiniband and shmem can be used at the same time. In that
      case, Portals will use infinband between nodes, and shmem
      intra-node. If only shmem is used, then portals will not run
      between nodes (obviously).

    On top of that, 2 different environments can be generated:

      * the "fat library" which contains all the portals API. Each
        process has its own progress thread which leads to the use of
        too many cores on a machine. This is the default.

      * the Portals Progres Engine (PPE) and the light library. The
        PPE is a daemon that regroups the progress threads (one by
        default) for all the portals process on the host. The portals
        application links to the "light library" which is only a pass
        through between the application and the PPE. Very litlle
        processing is done in the light library; most of it is done
        inside the PPE. This environment is selected with
        --enable-ib-ppe. The XPMEM driver must be present, and so it
        is mutually exclusive with the shmem transport. The daemon
        must be started prior to running a Portals4 application:
          <PATH>/p4ppe

        p4ppe has a set of options. Run with the --help optins to see
        them.

    Both the fat and light library are called the same, thus only one
    type can exist on a machine at the same time; use LD_LIBRARY_PATH
    and/or LD_PRELOAD to work around.

    Pre-requisites

      * libev-4.0.4 (or similar), available at
        http://software.schmorp.de/pkg/libev.html

      * The KNEM driver from
        http://runtime.bordeaux.inria.fr/knem/. Will be used for
        shared memory if --with-knem=<path> is set. Ensure that
        /dev/knem is readable/writable by the user running the portals
        software.

      * The XPMEM driver from
        https://code.google.com/p/xpmem/. Mandatory if the PPE is
        selected, unused otherwise. The current driver has crashing
        issues and doesn't compile on recent kernel versions.

      * The ummunotify driver from
        http://support.systemfabricworks.com/downloads/ummunotify/ummunotify-v2.tar.bz2
        (required for correctness with the IB transport). Ensure that /dev/ummunotify is
        readable/writable by the user running the portals software.
        WARNING: Not using ummunotify may result in program incorrectness..

    Build:
      Note that the paths to mpi may not be necessary or may need to
      be changed depending on your linux distribution.

      * minimal, no shared memory:
          ./configure

      * optimized, with shared memory and KNEM support:
          ./configure --enable-transport-shmem --with-knem=/opt/knem --enable-fast

      * PPE, no IB transport (so local node only):
          ./configure --enable-ib-ppe --disable-transport-ib

      Then type "make".

    Test:
      * Type "make check" in the main directory. This will run a
        series of checks on the local node, with either 1 or 2 ranks.
        Configure will attempt to figure out the proper way to launch
        parallel processes.  The TEST_RUNNER environment variable can
        be used to set the proper test runner (such as
        TEST_RUNNER='yod -np $(NPROCS)').

    Environment variables:

      * PTL_ENABLE_MEM=[0|1] will deactivate/activate the local memory
        transport, if one is compiled in.
      * PTL_DEBUG=1 will activate the tracing
      * PTL_LOG_LEVEL=[0|1|2|3] will set the trace level.
      * PTL_IFACE_NAME allows for the explicit naming of the network interface
        for example ib0, eno1, etc.
      * PTL_DISABLE_MEM_REG_CACHE=[0|1] deactivates/activates the IB memory 
        registration cache. Disabling it no longer requires ummunotify, and
        the implementation does not keep a registered memory cache.

      For instance:
        PTL_LOG_LEVEL=3 PTL_DEBUG=1 yod -n 1 ./spam

    Building an RPM:
      * make dist       --> this will create portals-4.0.tar.gz
      * rpmbuild -ta portals-4.0.tar.gz

    Limitations:
      * A program may not open more than one NID in its lifetime.

    Why Portals may not run properly:
      * The user cannot pin enough memory. By default linux systems
        allow about 32KB. Check with "ulimit -l". This is for IB
        only. Edit /etc/security/limits.co onf and change/add the
        following 2 lines (including the stars):
           * hard memlock unlimited
           * soft memlock unlimited
        (This setting allow every user to pin large amounts of
        memory. Replace the stars with a user name for a tighter
        setting).

      * IB is not up and running (check with "ibv_devinfo") or the
        default IPoIB interface, ib0, doesn't have an IP address. All
        interfaces should be on the same IP range.

      * slow performances can be caused by cpuspeed. Disable it
        ("service cpuspeed stop").

      * uneven performance between repeats can be caused by the
        threads being on different cores. Pin them.

      * When shmem is used, under the wrong circumstances, the files
        /dev/shm/portals4-shmem-* are not removed. If a subsequent run
        tries to re-use the same name, it will fail and the
        application may exit.

      * If you get a mr_lookup: Assertion `res == ((void *)0)' failed
        error, you need to configure Portals 4 with --enable-zero-mrs
        to enable zero length MR suport.