Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
* Improvements to thermostat debug output (#19279) * add: update DEBUG_THERMOSTAT to only control the virtual switch Also, debug output is still generated but end user can control this debug level 3 * add: debug output of main controller parameters when thermostat enabled Also, add units for debug outputs added to make them more intelligible * Update xdrv_39_thermostat.ino * add: debug message when sensor is detected as not alive fix: display thermostat number in debug messages * add: log message prefix string for thermostat * Update xdrv_39_thermostat.ino fix: typos in comments add: debug messages * add: debug prefix for thermostat * add: debug prefix added to output lines * fix: comment typos and small grammatical changes for clarity * add: debug prefix 'THE' added to debug output * add section safeboot_flags in platform_tasmota32.ini (#19281) This will make it easier to ignore a bunch of libraries in order to speed up builds without polluting the ENV sections too much. Usage: [env:my_safeboot_env] lib_ignore = ${safeboot_flags.lib_ignore} * use common safeboot flags (#19282) * use common safeboot flags (#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * fix IRAM_ATTR specified both in function declaration and definition (#19286) * Improvements to PID controller driver (#19285) * add: update DEBUG_THERMOSTAT to only control the virtual switch Also, debug output is still generated but end user can control this debug level 3 * add: debug output of main controller parameters when thermostat enabled Also, add units for debug outputs added to make them more intelligible * Update xdrv_39_thermostat.ino * add: debug message when sensor is detected as not alive fix: display thermostat number in debug messages * add: log message prefix string for thermostat * Update xdrv_39_thermostat.ino fix: typos in comments add: debug messages * add: debug prefix for thermostat * add: debug prefix added to output lines * fix: comment typos and small grammatical changes for clarity * add: debug prefix 'THE' added to debug output * add: display PID status and key info on web output * fix: remove extraneous comments that included unused code fragments * add: local sensor handling improvements add: define a local sensor name add: define the local sensor measurement parameter add: limit sensor not seen error message to every 60 seconds to avoid flooding the logs add: include interval since which sensor data was last updated fix: properly update the maximum interval time so missing sensor data is properly alerted * Update xdrv_49_pid.ino * Typo architceture → architecture (#19288) * avoid unnecessary compiling of specific libraries in lib32_div for most builds (#19293) * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * ESP32: pass flashmode at build time to macro definition (#19299) * pass flashmode at build time to macro definition * fix 8266 builds * fix: properly detect device is offline after maximum misses reached (#19298) * fix c6 env * Update changelogs * [DS18x20] Enhance use of aliases (#19026) * [DS18x20] Enhance use of aliases `defineDS18x20_USE_ID_AS_NAME`: Always show part of the address, even for one sensor `#define DS18x20_USE_ID_ALIAS`: The command `DS18Alias` can now be use with alphanumeric aliases, which replace the sensor name * [DS18x20] change to calloc() * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix OneWire for IDF5.1 and C2/C6 (#19303) * fix OneWire for IDF5.1 and C2/C6 * Use Onewire in arduino30 builds * use SOC specific defines for C2,C3 and C6 * Removes software based no load threshold. (#19302) Lowers ADE7953 builtin no load detection threshold to be able to measure 5 watt power levels. * Update changelogs * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * Creates a place to put the customer boards (#19309) * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * Add commands to allow setting of timeprop parameters (#19310) * add: commands to set timeprop settings * Update my_user_config.h * fix: properly generated json response to commands * Sync dev with release v13.1 * Update platformio_tasmota32.ini (#19313) --------- Co-authored-by: Paul Blacknell <[email protected]> Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Дилян Палаузов <[email protected]> Co-authored-by: Theo Arends <[email protected]> Co-authored-by: SteWers <[email protected]> Co-authored-by: Christian Baars <[email protected]> Co-authored-by: paulusbrand <[email protected]> Co-authored-by: Martin <[email protected]>
- Loading branch information
9 people
authored
Aug 15, 2023
1 parent
ed9666e
commit 09feb95