Cobol-REKT is an evolving toolkit of capabilities helpful for reverse engineering legacy Cobol code. These capabilities range from building flowcharts of the underlying code to translating COBOL into a hybrid Intermediate Representation (graph- and instruction- based) potentially suitable for transpilation to other languages.
Engineers can pick components from this library to incorporate into their reverse engineering analysis workflows, or more cohesive products suitable for wider audiences like analysts.
This is also why Cobol-REKT does not have a UI (though there is one in the works for showcase purposes).
An important aspirational aim of this library is to serve as a testbed for some of the following:
- Different compile-time analyses focusing on moving from an unstructured programming language to a structured one.
- Code transformations useful for translating unstructured control flow constructs to modern control flow constructs.
- Applications of ML and reasoning techniques on top of legacy code
In addition, the library also includes several reusable algorithms which are commonly used in analysis in compiler middleware toolchains.
You can see the current backlog here.
- Introduction
- Demo App (WIP)
- Major Dependencies
- Reverse Engineering Use Cases
- Roadmap
- Flowchart Generation
- Parse Tree Generation
- Control Flow Generation
- Neo4J Integration
- LLM-augmented Analysis
- Data Dependency Generation
- Comments integration
- SMOJOL (SMol Java-powered CobOL) Interpreter
- Analysis through JGraphT
- Useful Analyses through plain Python
- Analysis through NetworkX
- Control Flow Analysis and Transpilation Experiments
- Running against AWS Card Demo
- Developer Guide
- Catalogue of Reusable Algorithms
- A Note on Copyright
- Caveats
- Known Issues
- References
- Demo App Setup(WIP)
- Demo App Screenshots
Cobol-REKT is a continually evolving, actively maintained collection of capabilities helpful for reverse engineering legacy Cobol code. The following is a representative list of the capabilities currently available:
- Program / section / paragraph level flowchart generation based on AST (SVG or PNG)
- Section-wise generation of Mermaid flowcharts
- Parse Tree generation (with export to JSON)
- Control Flow Tree generation (with export to JSON)
- Allows embedding code comments as comment nodes in the graph
- The SMOJOL Interpreter (WIP)
- Injecting AST and Control Flow into Neo4J
- Injecting Cobol data layouts from Data Division into Neo4J (with dependencies like MOVE, COMPUTE, etc.) + export to JSON
- Injecting execution traces from the SMOJOL interpreter into Neo4J
- Perform actions on graphs using depth first traversals in Neo4J (AST nodes or Data Structure nodes). Use cases can include aggregating lower-level summaries (using an LLM) into more abstract descriptions of functionality, a la GraphRAG.
- Exposes a unified model (AST, CFG, Data Structures with appropriate interconnections) which can be analysed through JGraphT, together with export to GraphML format and JSON.
- Support for namespaces to allow unique addressing of (possibly same) graphs
- Analysing static value assignments to variables
- Support for building Glossary of Variables from data structures using LLMs
- Support for extracting Capability Graph from paragraphs of a program using LLMs
- Injecting inter-program dependencies into Neo4J (with export to JSON)
- Paragraph similarity map (Java / Python)
- Code Pattern Detection (Neo4J / NetworkX)
- Transpilation and Control Flow Analysis capabilities:
- Exposing a basic transpilation model which is not tied to the COBOL syntax.
- Exposing Basic Blocks which are a useful first step in raw transpilation
- Calculating limit flow graphs using T1-T2 reductions: Analyse whether the control flow graph is reducible or not. This is a proxy for how well-structured the program is, and how amenable it is to direct transpilation to structured programming languages (without arbitrary GOTOs)
- Dominator Analysis: This is the first step which forms the basis for techniques like detecting implicit loops, and correct scoping of any potential transpiled code in structured programming languages.
- ... and more!
This app is ultimately intended to only give a showcase of the capabilities of the library, and is currently in a nascent state and not ready for use. Nevertheless, the screenshot below shows the user navigating the syntax highlighted Intermediate Representation source, with the IR Control Flowgraph shown in the graph. The top right pane shows the currently selected node information, and the bottom right pane shows the available projects.
Currently, the app showcases the following capabilities:
- Flowcharts
- Intermediate Representation AST + Code
- IR Control Flowgraph
- T1-T2 Reducibility Test
- Flow Model
- Loop Body detection
- GO TO elimination
- Original Source
Instructions for setting up the demo app are provided later, and will evolve. The video below shows some of the capabilities of the library.
Cobol-REKT is more of a library of useful things intended to be embedded in more formal reverse engineering workflows/pipelines, rather than being a standalone tool (though you can certainly use it as such). Many of the higher-level wrappers are merely sensible defaults; you are encouraged to modify them to suit your needs.
It is also to be noted that OpenAI integration is only attached to specific features. Much of the functionality of this toolkit is based on deterministic analysis.
The toolkit consists of Java components, most of which are around parsing, ingestion of, export from Cobol sources, and control flow analyses, and Python components, which carry out some of the other analyses (including LLM-assisted summaries).
In addition, the support for Neo4J allows you to build custom graph analyses as per your needs. I expect most of the dynamic analysis to happen through Python (using Neo4J or NetworkX), hence the Java component tries to unlock as much of the ingested data as possible in different formats.
- The toolkit uses the grammar available in the Eclipse Che4z Cobol Support project to create the parse tree.
- The toolkit uses the API from Woof to interact with Neo4J.
- Graphviz for flowchart generation; see its documentation for OS-specific installation instructions.
- JGraphT for representing graph structures in all control flow / reducibility analyses and some export functionality.
- NetworkX for Python-based graph analyses
- An implementation of the gSpan algorithm for Frequent Subgraph Mining is adapted from [https://github.com/betterenvi/gSpan].
- Neo4J is required for using tasks involving Neo4J. The APOC and GDS plugins will need to be installed. All the tasks have also been tested using Neo4J Desktop.
- A subscription to Azure's OpenAI API is currently needed for capabilities which use LLMs.
- VAVR for functional lists used in zipper classes for AST navigation and manipulation.
- The demo app is being developed using Vue.js.
RuntimeTypeAdapterFactoryfrom Gson for some serialisation use-cases.
Some reverse engineering use cases are listed below. Descriptions of the capabilities which support these use cases are provided in later sections.
- The Parse Tree can be fed to a Graph DB for consumption by an LLM through agents to answer questions about the codebase
- Static analysis of the parse tree to reveal important operations (database operations, variable dependencies)
- The interpreter can be used to trace flows to experiment with different conditions
- Trace variable impact analysis (Which variables are affected by which in a particular run)
- Serve as input for LLM to explain specific flows in the program
- Serve as a proxy for testing behaviour at section/paragraph level if needed
- Identify dead code?
- Try out new rules?
- Identify different flows in the report - use cases for forward engineering
flowchart LR
parsed_source[Parsed Source] --> ir_source[Intermediate Representation];
ir_source --> basic_blocks[Basic Block Extraction];
parsed_source --> symbol_table[Symbol Table];
ir_source --> interpret[Interpretation];
ir_source --> control_flowgraph[Control Flowgraph];
symbol_table --> interpret;
parsed_source --> summary[Summarisation];
parsed_source --> capabilities[Capabilities];
control_flowgraph --> loop_id[Loop Identification];
control_flowgraph --> reaching_cond[Reaching Conditions];
control_flowgraph --> t1_t2[T1-T2 Reducibility Analysis];
t1_t2 --> scc[Strongly Connected Components];
scc --> loop_body[Loop Body Detection];
control_flowgraph --> loop_body;
ir_source --> eliminate_goto[Eliminate GO TO];
t1_t2 --> cns[Controlled Node Splitting];
control_flowgraph --> cns;
t1_t2 --> structure_id[Procedural Structure Identification];
ir_source --> program_dependency[Inter-program dependency];
symbol_table --> dataflow[Dataflow Analysis];
control_flowgraph --> dataflow;
control_flowgraph --> probabilistic_reasoning[Probabilistic Reasoning???];
dataflow --> probabilistic_reasoning;
capabilities --> probabilistic_reasoning;
program_dependency --> system_view[System View];
symbol_table --> system_view;
control_flowgraph --> system_view;
capabilities --> system_view;
system_view --> architecture_analysis[Architecture Analysis]
architecture_analysis --> architecture_mapping[Architecture Mapping];
This capability allows the engineer to transform Cobol source (or part of it) into a flowchart. The flowchart stays true to the source but omits syntactic noise to produce a detailed flow of logic through the source. The capability uses Graphviz to generate the flowchart images. The flowchart can be generated by specifying the DRAW_FLOWCHART task.
- Specifying the
--generationparameter asSECTIONcreates one flowchart per section, while specifying the value asPROGRAMgenerates one flowchart for the entire program. - You can specify the output format as SVG or PNG by setting
--fileOutputFormattoSVGorPNGrespectively.
NOTE: You need to have installed Graphviz to generate flowcharts. Specifically, the dot command should be available on your path.
The dotted lines indicate things that are inside a node. So, in the above example, after the first beige "Processing" block, there is a node which leads to an IF statement through the dotted line. What happens inside the IF statement can be understood by "stepping into" this dotted line. The normal flow after the IF statement finishes can be continued by returning to the node where the dotted line originates.
You can also generate Mermaid flowcharts for embedding in other Markdown files. You can use the EXPORT_MERMAID task for this. Currently, this supports only section-wise generation of Mermaid charts.
This allows the engineer to produce the parse tree of Cobol source. This is suitable for use in further static analysis, transformation (into a control flow tree, for example), and inputs to other systems (informed chunking to an LLM, into a graph database for further exploration, etc.). See Reverse Engineering Use Cases for more examples.
Most of the capabilities are already present in the Che4z library. Some new grammars have been added. They are:
- IDMS panel definitions which are used in user interfaces
- Cobol Data Layouts, which are used in defining the records in the DATA DIVISION
This capability can be used by specifiying the WRITE_RAW_AST task.
This capability allows the engineer to produce a control flow tree for the Cobol source. This can be used for straight-up visualisation (the flowchart capability actually uses the control flow tree behind the scenes), or more dynamic analysis through an interpreter. See SMOJOL (SMol Java-powered CobOL Interpreter) for a description of how this can help.
The CFG generation is part of the FLOW_TO_NEO4J task.
Note that this is not the same control flow model which is used in the transpiler tasks. For that, see Experiments in Transpilation.
Both the AST and the Control Flow Graph can be injected directly into Neo4J. The AST injected can be in the same format as the SMOJOL interpreter, or the bare parse tree generated by ANTLR. The Control Flow Graph is in the SMOJOL AST format.
When generating the AST and CFG, the library allows configuring them to be the same, i.e., the same nodes are reused for creating both AST and CFG connections. For example, in the screenshot below: the same CFG has CONTAINS (AST relationship), FOLLOWED_BY (CFG relationship), and the MODIFIES/ACCESSES relationships (data structure relationship).
This provides a rich unified view of the entire program, without having to jump between multiple disconnected views of the source code, for analysis.
This can be done by specifiying the FLOW_TO_NEO4J task.
The OpenAI integration can be leveraged to summarise nodes in a bottom-up fashion (i.e., summarise leaf nodes first, then use those summaries to generate summarise the parent nodes, and so on).
The following diagram shows the AST, the Control Flow Graph, and the data structures graph. The yellow nodes are the summary nodes (generated through an LLM) attached to the AST (to provide explanations) and the data structures (to infer domains).
You will need to have configured the following two environment variables:
AZURE_OPENAI_API_KEYAZURE_OPENAI_ENDPOINT
The toolkit supports building glossaries of variables given the data structures in a program. This capability is provided through Python in the smojol_python component.
To use this facility, start by exporting the data structures to JSON, through the JAR, like so:
java -jar smojol-cli/target/smojol-cli.jar run YOUR_PROGRAM --commands="BUILD_BASE_ANALYSIS WRITE_DATA_STRUCTURES" --srcDir /path/to/sources --copyBooksDir /path/to/copybooks --dialectJarPath che-che4z-lsp-for-cobol-integration/server/dialect-idms/target/dialect-idms.jar --dialect IDMS --reportDir /path/to/report/dir
This will generate a JSON file in /path/to/report/dir. After this, you can run:
cd smojol_python
python -m src.llm.glossary_builder.main /path/to/report/dir/program-data.json out/glossary.md
This will generate the glossary in out/glossary.md. Integrating other out-of-band data sources is a work in progress.
The toolkit supports extracting a capability map from the paragraphs of a source. For this, you need to generate the AST in Neo4J, as well as the data structures JSON. You can do this via:
java -jar smojol-cli/target/smojol-cli.jar run YOUR_PROGRAM --commands="BUILD_BASE_ANALYSIS FLOW_TO_NEO4J WRITE_DATA_STRUCTURES" --srcDir /path/to/sources --copyBooksDir /path/to/copybooks --dialectJarPath che-che4z-lsp-for-cobol-integration/server/dialect-idms/target/dialect-idms.jar --dialect IDMS --reportDir /path/to/report/dir
After this, you will want to extract the paragraph capabilities, like so:
python -m src.llm.capability_extractor.paragraph_capabilities /path/to/data/structures/json /paragraph/capabilities/output/path ../paragraph/variables/explanation/output/path
This will generate the capabilities in /paragraph/capabilities/output/path. At this point, you may need to clean parts of the output manually, if some entries do not correpond to a comma-separated list of domain terms (efforts to eliminate this manual process are in progress).
The final step is to actually generate the capability map:
python -m src.llm.capability_extractor.capabilities_graph /paragraph/capabilities/output/path
This will take a little time, depending upon the number of paragraphs and their sizes. At the end, it will generate a dendrogram visualisation, as well as the capability map in Neo4J, as illustrated below (for a 10000+ line COBOL program).
This capability connects records which modify other records, with a FLOWS_INTO relation. The dependencies traced include variables which are used in expressions, as well as freestanding literals. Below is an example of a set of record dependencies from a program. It also generates connections based on REDEFINES clauses.
This capability connects comments to the nearest subsequent node, with a HAS_COMMENT connection. This works for comments in the PROCEDURE division and all data structures. Comments before copybooks are connected to the main program node. Any comments which cannot be attached to found nodes, end up being connected to the main program node.
This can be done by specifying the ATTACH_COMMENTS task. Note that for the comment nodes to appear in the graph, the FLOW_TO_NEO4J task must appear after the ATTACH_COMMENTS task.
The example below shows all node-comment sets for a reasonably large program.
The interpreter is a natural extension to building the parse tree for a Cobol source. Since syntax nodes are temporally ordered, it is possible to build an execution tree which covers all possible flows. This is the basis for flowchart generation, and also the basis for a tree-walk interpreter. The interpreter sets up the AST which is a projection of the parse tree more suitable for execution. Parts of the interpreter convert specific nodes in the AST into more suitable forms at runtime (for example, expression evaluation).
The primary motivation for the interpreter is to be able to simulate the execution of programs (or fragments of programs) in a sandboxed environment where the engineer needn't worry about fulfilling dependencies required to run the code in a true mainframe environment. Rather, they can inject these dependencies (values of variables, for example) as they see fit, to perform their true task: namely, performing control flow analysis.
The interpreter can run in two modes:
- No-Operation mode: In this mode, none of the processing statements like MOVE, ADD, etc. are actually executed, but control flow is still respected. This mode is useful in many contexts where the actual change in variables isn't as important as knowing / logging the action that is taking place. This is a good default starting point for ingesting runtime execution paths into a graph. Decisions which affect control flow are evaluated based on the kind of evaluation strategy specified, so the full expression evaluation strategy will not be effective. More specific strategies can be written, or interactive resolution through the console can be used.
- Full evaluation mode (Experimental): In this mode, expressions are actually evaluated to their final results, and is the closest to actual execution of the program including storing variable state. Note that this is a work in progress, since every nook and cranny of the Cobol standard is not supported yet.
- Support for most control constructs:
IF/THEN,NEXT SENTENCE,GO TO,PERFORM,SEARCH...WHEN, IDMSON - Support for expression evaluation in COMPUTE, MOVE, ADD, SUBTRACT, MULTIPLY, DIVIDE
- Support for interactive resolution of conditions
- Most common class comparisons supported
- Support for abbreviated relation condition forms (
IF A > 10 OR 20 AND 30...) - Functioning type system (supports zoned decimals, COMP-3 / Packed Decimal and alphanumerics) with a large subset of z/OS behaviour compatibility for scenarios undefined in the Cobol standard
- Support for fixed-size tables and single subscripting
- Support for elementary, composite, and recursive REDEFINES (REDEFINES of REDEFINES)
- Multiple subscript access
- Automatic detection of types from DATA DIVISION specifications
- Supports evaluation of level 88 variables
- Support for tracking variable state
- Set breakpoints based on conditions or specific AST node
- View current stack at a breakpoint
- View variable values at a breakpoint
- Support for different strategies to deal with unresolved record references (ignore / throw exception)
- Support for listeners to extract specific information about the current state of the program (all the Neo4J integrations are via these listeners)
- Support symbolic execution
- Support EVALUATE statements
- PERFORM VARYING
- PERFORM INLINE...VARYING
- Initialise values of variables from DATA DIVISION
- Support for floating point and alphabetic
- Support for REDEFINES larger than original record
- Variable snapshot per stack frame
- Evaluate IDMS expressions
- ON clauses on common operations
- ...
The interpreter also supports injecting a complete execution path through the program into Neo4J. The screenshot below shows the execution trace of a reasonably complex program.
You can export to GraphML from Neo4J pretty easily. If you don't have Neo4J set up though, the toolkit allows exporting the following entities to the GraphML format (with all interconnections) as a single supergraph, so that they can be consumed further downstream for analysis:
- Abstract Syntax Tree (the
WRITE_FLOW_ASTtask) - Control Flow Graph (the
WRITE_CFGtask) - Data Structures + Dependencies (included under both of the above tasks)
The screenshot below shows a sample program's unified model exported to GraphML and loaded through the yEd Graph Editor.
To export the unified graph to GraphML from Neo4J, you can run the following command:
CALL apoc.export.graphml.all("<export.graphml>", {})
The file will be in the import directory inside the directory where the current database files are stored (in Neo4J Desktop).
In addition to writing to Neo4J and leveraging its data science capabilities to analyse the graph(s), the library also embeds JGraphT, a powerful library of graph algorithms. The JGraphTBuilder class converts the unified model (AST, CFG, Data Structures) into a DirectedPseudograph (because there can be both loops and parallel edges between two nodes), for consequent analysis through the JGraphT API.
Custom analyses are a work in progress. The COMPARE_CODE task, for example, uses the JGraphT library.
This is useful for when you are looking for the range of values which are assigned to a record in a program. You will need to execute the WRITE_RAW_AST task first, like so:
java -jar smojol-cli/target/smojol-cli.jar run test-exp.cbl hello.cbl --commands="BUILD_BASE_ANALYSIS WRITE_RAW_AST" --srcDir /Users/asgupta/code/smojol/smojol-test-code --copyBooksDir /Users/asgupta/code/smojol/smojol-test-code --dialectJarPath ./che-che4z-lsp-for-cobol-integration/server/dialect-idms/target/dialect-idms.jar --reportDir out/report --generation=PROGRAM
Once you have the AST file, you can run the analysis like so (making sure first that you are in the smojol_python directory):
python -m src.analysis.variable_static_values /path/to/ast/json --output=/path/to/output
If you omit the --output flag, it will simply print out the results.
If you export the Unified Model to JSON, you can import it into NetworkX quite easily. The unified_model_to_networkx script lets you ingest the JSON and create both the fully-connected NetworkX graph, and the in-memory Python equivalent of the Unified Model. You're free to extract out specific parts of the model through convenience functions. The following code extracts out the AST, CFG, and the data structures separately. You can customise extraction for your use case; take a look at any one of those convenience methods for guidance.
with open(input_path, 'r') as file:
unified = json.load(file)
ast_x, _, _ = extract_ast(unified)
cfg_x, _, _ = extract_cfg(unified)
ds_x, _, _ = extract_ds(unified)
There are currently two tasks implemented using NetworkX.
TODO...
See similarity.py.
It is very easy to do pattern matching in Neo4J, so you might choose to use those facilities instead (see Analysis through Neo4J). However, pattern matching is also possible using NetworkX directly using subgraph isomorphisms.
You will need to construct the subgraph pattern through code, which is not as elegant as writing Cypher queries, but it does work. See pattern_matcher.py for an example.
You can match patterns pretty easily through Cypher. See neo4j_pattern_matcher.py for an example of how to match a call pattern, i.e., a bunch of sequential MOVE statements, followed by a CALL statement. The patterns being developed are documented in neo4j_pattern_queries.py.
You can find some useful Neo4J-based analysis queries in Analysis
Most of the tasks in this category are meant to be used as part of a larger analysis workflow, and thus do not have any filesystem outputs. All the analyses use JGraphT's DefaultDirectedGraph for representing and manipulating graph structures.
Also note that most of the tasks under this category are not specific to COBOL, and can be used for analysing control flowgraphs derived from any language.
This target exposes a basic transpilation model which is not tied to the COBOL syntax. It uses only assignments, loops, conditions, and jumps to represent most of COBOL syntax. The result may not still be well-structured because of arbitrary GOTOs. This will be the input for further control flow analysis tasks.
The model currently consists of the following:
- The transpiler syntax tree: The original intermediate tree representation from which instructions and the control flow graph are generated.
- Transpiler instructions: This has the instructions laid out serially. It is primarily used to resolve locations for instructions like
breakandNEXT SENTENCE. Note that sentinel instructions are present in this sequence, likeENTER,EXIT, andBODY. - Transpiler instruction Control Flow Graph: This is generated from the instruction sequence above, and thus the nodes are the transpiler instructions (including sentinel instructions).
- List of Basic Blocks: This is generated from the instruction sequence, and represent blocks of code where the only join point is (possibly) the first instruction in the block, and the only join point is (possibly) the last instruction in the block. For more information, see Basic Blocks.
For example, if we have a EVALUATE statment like the following:
EVALUATE TRUE ALSO TRUE
WHEN SCALED + RESULT < 10 ALSO INVOICE-AMOUNT = 10
MOVE "CASE 1" TO SOMETHING
WHEN SCALED + RESULT > 50 ALSO
INVOICE-AMOUNT = ( SOMETEXT + RESULT ) / SCALED
MOVE "CASE 2" TO SOMETHING
WHEN OTHER
MOVE "CASE OTHER" TO SOMETHING
END-EVALUATE
Then, the following is an example of the text representation of the transpiler tree of the above statement (formatted for clarity):
if(and(eq(primitive(true), lt(add(ref('SCALED'), ref('RESULT')), primitive(10.0))), eq(primitive(true), eq(ref('INVOICE-AMOUNT'), primitive(10.0)))))
then
{
CODE_BLOCK: CODE_BLOCK: set(ref('SOMETHING'), value(primitive("CASE 1")))
}
else
{
if(and(eq(primitive(true), gt(add(ref('SCALED'), ref('RESULT')), primitive(50.0))), eq(primitive(true), eq(ref('INVOICE-AMOUNT'), divide(add(ref('SOMETEXT'), ref('RESULT')), ref('SCALED'))))))
then
{
CODE_BLOCK: CODE_BLOCK: set(ref('SOMETHING'), value(primitive("CASE 2")))
}
else
{
CODE_BLOCK: CODE_BLOCK: set(ref('SOMETHING'), value(primitive("CASE OTHER")))
}
}
As another example, let's take a PERFORM INLINE statement which looks like so:
PERFORM TEST BEFORE VARYING SOME-PART-1 FROM 1 BY 1
UNTIL SOME-PART-1 > 10
AFTER SOME-PART-2 FROM 1 BY 1 UNTIL SOME-PART-2 > 10
DISPLAY "GOING " SOME-PART-1 " AND " SOME-PART-2
END-PERFORM.
The intermediate representation looks like the following:
loop[loopVariable=ref('SOME-PART-1'), initialValue=primitive(1.0), maxValue=NULL, terminateCondition=gt(ref('SOME-PART-1'), primitive(10.0)), loopUpdate=primitive(1.0), conditionTestTime=BEFORE]
{
loop[loopVariable=ref('SOME-PART-2'), initialValue=primitive(1.0), maxValue=NULL, terminateCondition=gt(ref('SOME-PART-2'), primitive(10.0)), loopUpdate=primitive(1.0), conditionTestTime=BEFORE]
{
CODE_BLOCK: print(value(primitive("GOING ")), value(ref('SOME-PART-1')), value(primitive(" AND ")), value(ref('SOME-PART-2')))
}
}
You can view the formatted outputted of any node (program root or otherwise), by using the TranspilerTreeFormatter's format() method. The following is the formatted IR representation of simple-goto.cbl.
BLOCK [ProcedureDivisionBodyContext/T1] {
{
}
BLOCK [S] {
placeholder: S SECTION
{
BLOCK [SA1] {
placeholder: SA1
{
print(value(primitive("ABCD")))
}
{
if (gt(ref('WS-NUM1'), primitive(10.0)))
{
jump(loc(SZ1), [NULL])
}
else
{
print(value(primitive("<= 10")))
}
}
{
print(value(primitive("SA1-1")))
print(value(primitive("SA1-2")))
}
}
BLOCK [SZ1] {
placeholder: SZ1
{
print(value(primitive("ENDING...")))
}
}
}
}
}
The screenshot below shows a part of an example transpiler model flowgraph.
See TranspilerBuildMain.java for an example.
The BuildTranspilerFlowgraphTask creates the intermediate AST, instructions, and the Basic Block tree.
In addition, this task can accept a set of flow hints. These flow hints allow the engineer to explicitly specify section/paragraph names which are not targets of fallthrough flows. Without these hints, some programs can yield irreducible control flowgraphs, which require more complicated resolutions, come transpilation time. See Reducibility Test for more details.
SEARCH-WHENstatements are translated into collection iterations (with breaks) and conditions.EVALUATEstatements are translated into loops and conditions.NEXT SENTENCE,GO TOs (conditional and unconditional) are translated into static jumps with appropriate conditionals.PERFORM INLINEstatments are translated into code blocks (enclosed in loops if there is aVARYINGclause).PERFORMprocedure calls are converted into jump calls which can contain a start and stop code block (forTHROUGHclauses). Loops are added forVARYINGclauses.- Sections and paragraphs are converted into labelled aggregate blocks of code. Sentences are converted into unlabelled code blocks, but with metadata identifying them as sentences (for purposes of resolving
NEXT SENTENCElocations). MOVEis converted into assignments.- Operations like
COMPUTE,ADD,SUBTRACT,MULTIPLY, andDIVIDEare converted into sequences of expressions with explicit assignments (to account forGIVIINGphrases). - Any instructions not currently supported are converted into placeholder nodes.
Basic Blocks are useful for analysing flow of the code without worrying about the specific computational details of the code. They are also useful (and the more pertinent use-case in our case) for rewriting / transpiling potential unstructured COBOL code (code with possibly arbitrary GOTOs) into a structured form / language (i.e., without GOTOs).
Exposing basic blocks is done through the BuildBasicBlocksTask task. Note that this task does not actually output any artifacts, because it is intended for more internal analysis and transpilation (if I get to it at some point). Each BasicBlock contains a list of straight-line TranspilerInstructions.
Note that if you use the BuildTranspilerFlowgraphTask task, Basic Blocks are automatically generated for you.
[TODO: Write about reducibility]
Reducibility is tested using interval analysis, specifically using the repeated T1-T2 transform method.
See TranspilerInstructionIntervalAnalysisMain.java for an example.
A second technique for testing reducibility follows the method outlined in [Sreedhar-Gao-Lee, 1996].
BuildDJTreeTask: This creates the DJ tree using the dominator tree. It uses the output of theBuildDominatorTreeTaskas its input. See Dominator Analysis for more details.ReducibleFlowgraphTestTask: This is the actual test which determines if a flowgraph is reducible or not.
Strongly Connected Components in a flowgraph represent the most general representation of looping constructs. Proper SCC's have only one node in them that can be the entry point for any incoming edge from outside the SCC. These are natural loops. Having multiple entry points implies that there are arbitrary jumps into the body of the loop from outside the loop, which makes the loop improper, and consequently the graph, irreducible.
It is important to note that even if no improper SCC's are detected, it does not imply that the flowgraph is reducible. See the flowgraph built in counterExample() in ReducibleFlowgraphTest for an example of such pathological graphs.
Proper SCC's are a necessary condition for a reducible flowgraph, but not a sufficient condition. The sufficient condition is that no strongly connected subgraph be improper. However, SCC's are maximal strongly connected subgraphs, which means they can contain improper strongly connected subgraphs inside them, which is why the distinction is important.
This is, however, a good test which can surface loop-specific reducibility problems. The test is done using the IrreducibleStronglyConnectedComponentsTask task.
Strongly Connected Components are detected using JGraphT's built-in Kosarajau's algorithm for finding SCC's.
The technique of testing flowgraph reducibility in the previous section also extends to finding the all loop bodies, both reducible and irreducible. See LoopBodyDetectionTask.
This technique works by first building the Dominator-Join graph (DJ graph), then identifying reducible and irreducible loop bodies in reverse tree depth order, so that inner loops are detected first and folded into single abstract nodes.
Irreducible loop bodies are found by identifying back edges which are also Cross-Join edges, and then using an SCC algorithm to find SCCs in the subgraph induced by all nodes at that level or deeper.
Note that there may be some loops which are not fully connected when visualised in the original graph. This is not a bug. This happens because a back-edge target may be the header of a lower level loop which has an exit in the middle of the loop, and was collapsed. The collapsed loop is represented by that single loop header and thus the aforementioned loop exit also appears to come from that loop header (since it is representative of the entire inner loop).
Several tasks are required to be run to do dominator analysis.
DepthFirstTraversalLabelTask: This creates the actual depth-first post order labelling that will be used to build dominator lists. Note that task can be applied either to the rawTranspilerInstructionflowgraph, or theBasicBlockone, depending upon your preference. See Reusable Algorithms for more details.BuildDominatorsTask: This creates the actual dominator lists. Immediate dominators can be accessed using theimmediateDominators()method. All possible dominators for all the nodes in the flowgraph can be accessed using theallDominators()method.BuildDominatorTreeTask: This creates the dominator tree which is used to detect irreducible loops using the algorithm as outlined in [Sreedhar-Gao-Lee, 1996]. It uses the output of theBuildDominatorsTaskas its input.
See DominatorAnalysisMain.java for an example.
Given a graph slice, a start node, and a sink node, this calculates the actual conditions that need to be satisfied to reach the sink node. For example, assume we have the program like the following;
IDENTIFICATION DIVISION.
PROGRAM-ID. STOPRUN.
AUTHOR. MOJO
DATE-WRITTEN. SEP 2024.
ENVIRONMENT DIVISION.
DATA DIVISION.
WORKING-STORAGE SECTION.
01 WS-NUM1 PIC 9(9) VALUE 5.
PROCEDURE DIVISION.
S SECTION.
SA1.
IF WS-NUM1 > 10
THEN
GO TO SA2.
STOP RUN.
SA2.
IF WS-NUM1 = 201
THEN
DISPLAY "IT IS DONE".
STOP RUN.
If we run the task on this flowgraph, with the first instruction as the source, and the DISPLAY statement as the sink node, the reaching condition for the statement will be given as:
...
ENTER: CODE_BLOCK: print(value(primitive("IT IS: and(eq(ref('WS-NUM1'), primitive(201.0)), gt(ref('WS-NUM1'), primitive(10.0)))
...
To be more precise, the reaching conditions of all the nodes in the Depth-First Search tree with the start node as the root, are calculated.
A few important notes about this:
- The
ReachingConditionDefinitionTaskperforms this work. This calculates the actual reaching conditions of all the vertices in an acyclic graph slice. Condition-based refinement of conditions has not yet been implemented. - This is only applicable to acyclic graphs for the moment. Applying this to arbitrary graphs will not give correct results.
- Since the task requires a graph slice, the
BuildTranspilerFlowgraphTaskand theGraphSliceTasktasks should be run before this. This finds the graph slices as mentioned in the paper. It uses the instruction flowgraph built byBuildTranspilerFlowgraphTask.
This is an experimental technique based on Taming Control Flow: A Structured Approach to Eliminating Goto Statements to eliminate GO TOs by restructuring the AST.
The TreeSmith class provides capabilities for the following:
- Refactoring jumps into conditional jumps which are more easily refactored.
- Outward transformations of conditional jumps to escape scopes.
- Eliminating forward and backward jumps to labelled code blocks at the same level.
- The highest-level of abstraction is provided is through the
eliminateGoto()method.
Let's consider the simple-goto.cbl program. Eliminating the GO TO in this code, gives us the following code:
BLOCK [ProcedureDivisionBodyContext/T1] {
{
}
BLOCK [S] {
placeholder: S SECTION
{
BLOCK [SA1] {
placeholder: SA1
{
print(value(primitive("ABCD")))
}
{
if (gt(ref('WS-NUM1'), primitive(10.0)))
{
set(ref('SOME'), primitive(true))
if (not(primitive(true)))
{
}
else
{
}
}
else
{
print(value(primitive("<= 10")))
}
set(ref('SOME'), primitive(true))
if (not(primitive(true)))
{
}
else
{
}
}
set(ref('SOME'), primitive(true))
if (not(primitive(true)))
{
{
print(value(primitive("SA1-1")))
print(value(primitive("SA1-2")))
}
}
else
{
}
}
if (not(primitive(true)))
{
}
else
{
}
BLOCK [SZ1] {
placeholder: SZ1
{
print(value(primitive("ENDING...")))
}
}
}
}
}
NOTE: This is a work in progress. Variables which are used to descope jumps, are currently not named uniquely.
Here are some points to note regarding this technique:
- The only applicable transformation in the paper that is applicable in COBOL programs is the outward transformation. Thus, the other three techniques in the paper are not implemented.
- The algorithm does not utilise the value of the
IFcondition. Instead, it simply sets a boolean inside whatever scope it exists in, converts a jump into aJumpIf, and then proceeds to repeat this procedure till it is at the same level as its destination block. The final elimination occurs after that. - These operations mutate the original AST. If you are concerned about preserving the original AST, consider having another copy. Potentially, I may experiment with a functional data structure, like the ones in VAVR, to have immutability semantics.
This is probably best used for smaller scale refactorings, like eliminating jumps inside a section. For larger scale refactorings, a different approach (potentially based on Automatic compiler restructuring of COBOL programs into a proc per paragraph model - Patent US5778232A (Expired 2016)) might give better results.
This can determine which sections can be isolated into completely independent (behaviour-wise) functions, which ultimately helps in decomposing a monolithic COBOL program into modular components. It uses the technique of identifying sections which are SLIFO (Structural Last-In First-Out) in nature, as characterised in Identifying Procedural Structure in Cobol Programs.
See SLIFORangeMain for a preliminary example. This is still a work in progress.
The library has been tested (validation, flowchart generation, AST generation, Unified Model generation) against the AWS Card Demo codebase. To run it against that codebase, do the following:
- Clone the repository
- Create an empty file
app/cpy/DFHAID - Create an empty file
app/cpy/DFHBMSCA
Now run your commands as usual.
The build process has been tested on MacOS, Windows, and on the pipeline using the ubuntu-latest image.
JDK Note:
- The toolkit uses JDK 21 features; so you'll need the appropriate JDK set up.
- The Che4z COBOL support repository build files specify Java 8 for building, but using JDK 21 works.
- Using JDK 23 results in failures compiling the Che4z submodule, so avoid JDK 23: JDK 22 is ok.
I have intentionally not updated the JDK version in Che4z to minimise changes in that submodule.
After cloning the repository, initialise submodules using:
git submodule update --init --recursive
Run: mvn clean verify.
The Checkstyle step is mostly applicable for the Eclipse Cobol parser project. You can skip the Checkstyle targets with:
mvn clean verify -Dcheckstyle.skip=true
You can skip the tests as well, using:
mvn clean verify -Dmaven.test.skip=true
For generating flowcharts, you will need to set up Graphviz on your box; see the site for OS-specific installation instructions.
Before using any of the Python components, you will need to install dependencies, like so:
cd smojol_python
pip install -r requirements.txt
To build the demo app, please see Building the Demo App.
The individual functionalities in the Java component can be invoked using different commands. Further tasks / commands will be added.
This command encapsulates almost all the tasks that you are likely to run. The descriptions of the various commands are listed below.
BUILD_BASE_ANALYSIS: This task builds the base analysis model which includes the raw AST, the first approximate flowgraph model (used for flowchart generation, and as an intermediate step in the transpilation model building process), and a few other entities. Please note that ```BUILD_BASE_ANALYSIS` will always be the first task to be run before any of the following tasks, whether specified or not.WRITE_FLOW_AST: Writes a more useful form of the AST to JSON. This form is used by the interpreter and other analyses.FLOW_TO_NEO4J: This injects the unified model into Neo4J. Exposing more fine-grained options is in progress. This requires the environment variableNEO4J_URI,NEO4J_DATABASE(if not specified, defaults toneo4j),NEO4J_USERNAME, andNEO4J_PASSWORDto be defined. If you wish to include comments in the graph, theATTACH_COMMENTSneeds to have run first.ATTACH_COMMENTS: This parses the original source file (excluding copybooks for now) to find comments and attach them to the nearest subsequent AST node.FLOW_TO_GRAPHML: This exports the unified model to GraphML. Exposing more fine-grained options is in progress.WRITE_RAW_AST: This writes the original parse tree to JSON. Useful for downstream code to build their own AST representations.DRAW_FLOWCHART: This outputs flowcharts for the whole program or section-by-section of the program in PNG format.EXPORT_MERMAID: This outputs section-wise (one file per section) flowcharts for the program in the Mermaid format.WRITE_CFG: This outputs the control flow graph of the program as JSON.WRITE_DATA_STRUCTURES: This exports the data structure hierarchy of the program as JSON.BUILD_PROGRAM_DEPENDENCIES(ALPHA): Builds direct program dependencies fromCALLand IDMSTRANSFER CONTROLstatements. Indirect dependencies are not traced. For tracing the full dependency graph, see thedependencytask.COMPARE_CODE(ALPHA): Builds a map of inter-paragraph similarity based on node edit distances (using the Zhang-Shasha algorithm). Work in Progress.SUMMARISE_THROUGH_LLM: Summarises nodes depth-first, but starting at the leaves using an LLM.WRITE_LLM_SUMMARY: does the same thing as the previous task, but outputs the summaries as nested JSON.
For example, if you wanted to run all of the above, you could run the following command:
java -jar smojol-cli/target/smojol-cli.jar run test-exp.cbl hello.cbl --commands="BUILD_BASE_ANALYSIS WRITE_FLOW_AST FLOW_TO_NEO4J FLOW_TO_GRAPHML WRITE_RAW_AST DRAW_FLOWCHART WRITE_CFG" --srcDir /Users/asgupta/code/smojol/smojol-test-code --copyBooksDir /Users/asgupta/code/smojol/smojol-test-code --dialectJarPath ./che-che4z-lsp-for-cobol-integration/server/dialect-idms/target/dialect-idms.jar --reportDir out/report --generation=PROGRAM
Passing the validation flag (--validate or -v) skips running all tasks, and simply validates whether the source is syntactically correct. This is non-strict validation, i.e., invalid variable references are reported, but do not cause failure.
Specifying the --permissiveSearch flag matches file names more permissively, i.e., case-insensitive matching, and optional matching of files with .cbl extensions.
The help text is reproduced below (obtained by adding --help):
Usage: app run [-hpvV] [-d=<dialect>] [-dp=<dialectJarPath>]
[-f=<flowchartOutputFormat>] [-g=<flowchartGenerationStrategy>]
-r=<reportRootDir> -s=<sourceDir> -c=<commands>
[-c=<commands>]... -cp=<copyBookDirs>[,<copyBookDirs>...]
[-cp=<copyBookDirs>[,<copyBookDirs>...]]... [<programNames>...]
Implements various operations useful for reverse engineering Cobol code
[<programNames>...] The programs to analyse
-c, --commands=<commands> The commands to run (BUILD_BASE_ANALYSIS,
FLOW_TO_NEO4J, FLOW_TO_GRAPHML, WRITE_RAW_AST,
DRAW_FLOWCHART, WRITE_FLOW_AST, WRITE_CFG,
ATTACH_COMMENTS, WRITE_DATA_STRUCTURES,
BUILD_PROGRAM_DEPENDENCIES, COMPARE_CODE,
EXPORT_UNIFIED_TO_JSON, EXPORT_MERMAID,
SUMMARISE_THROUGH_LLM, WRITE_LLM_SUMMARY)
-cp, --copyBooksDir=<copyBookDirs>[,<copyBookDirs>...]
Copybook directories (repeatable)
-d, --dialect=<dialect> The COBOL dialect (COBOL, IDMS)
-dp, --dialectJarPath=<dialectJarPath>
Path to dialect .JAR
-f, --flowchartOutputFormat=<flowchartOutputFormat>
Format of the flowchart output (PNG, SVG)
-g, --generation=<flowchartGenerationStrategy>
The flowchart generation strategy. Valid values
are PARAGRAPH, SECTION, PROGRAM, and NODRAW
-h, --help Show this help message and exit.
-p, --permissiveSearch Match filename using looser criteria
-r, --reportDir=<reportRootDir>
Output report directory
-s, --srcDir=<sourceDir> The Cobol source directory
-v, --validate Only run syntax validation on the input
-V, --version Print version information and exit.
This command is used to trace the inter-program dependencies starting from a root program. To run this, use something like:
java -jar smojol-cli/target/smojol-cli.jar dependency if-test.cbl --srcDir /Users/asgupta/code/smojol/smojol-test-code --copyBooksDir /Users/asgupta/code/smojol/smojol-test-code --dialectJarPath ./che-che4z-lsp-for-cobol-integration/server/dialect-idms/target/dialect-idms.jar --export=out.json
Specifying the --neo4j flag injects those dependencies into Neo4J, while setting a path through export will export it to JSON. The screenshot below shows a very simple dependency graph generated from if-test.cbl (in the smojol-test-code directory). Dynamic dependencies (resolved through variables and expressions) are resolved in a very simple heuristic fashion for now; the code looks back upto 5 instructions before the control flow statement to see if there are any literal assignments to the variable holding the call target. If it finds one, that literal value is used.
The help text for this command is reproduced below:
Usage: app dependency [-hnpV] [-d=<dialect>] [-dp=<dialectJarPath>]
-s=<sourceDir> [-x=<exportPath>] -cp=<copyBookDirs>[,
<copyBookDirs>...] [-cp=<copyBookDirs>[,
<copyBookDirs>...]]... <programName>
Implements various operations useful for reverse engineering Cobol code
<programName> The program to analyse
-cp, --copyBooksDir=<copyBookDirs>[,<copyBookDirs>...]
Copybook directories (repeatable)
-d, --dialect=<dialect> The COBOL dialect (COBOL, IDMS)
-dp, --dialectJarPath=<dialectJarPath>
Path to dialect .JAR
-h, --help Show this help message and exit.
-n, --neo4j Export to Neo4J
-p, --permissiveSearch Match filename using looser criteria
-s, --srcDir=<sourceDir> The Cobol source directory
-V, --version Print version information and exit.
-x, --export=<exportPath> Export path
As an alternative to using the --validate flag, you can use the validate command explicitly, like so:
java -jar smojol-cli/target/smojol-cli.jar validate minimum.cbl test-exp.cbl --srcDir smojol-test-code/ --copyBooksDir "/path/1/copybooks,/path/1/copybooks" --dialectJarPath che-che4z-lsp-for-cobol-integration/server/dialect-idms/target/dialect-idms.jar --dialect IDMS --output out/validation.json
If you specify a path to output, the results will be written to the corresponding file as JSON.
By default, this is non-strict validation, i.e., invalid variable references are reported, but do not cause failure. If the --strict flag is also specified, invalid variable references in the program will cause the task to fail.
The help text is reproduced below:
Usage: app validate [-hptV] [-d=<dialect>] [-dp=<dialectJarPath>]
[-o=<outputPath>] -s=<sourceDir> -cp=<copyBookDirs>[,
<copyBookDirs>...] [-cp=<copyBookDirs>[,
<copyBookDirs>...]]... [<programNames>...]
Validates the candidate COBOL code
[<programNames>...] The programs to analyse
-cp, --copyBooksDir=<copyBookDirs>[,<copyBookDirs>...]
Copybook directories (repeatable)
-d, --dialect=<dialect> The COBOL dialect (COBOL, IDMS)
-dp, --dialectJarPath=<dialectJarPath>
Path to dialect .JAR
-h, --help Show this help message and exit.
-o, --output=<outputPath> Validation results output path
-p, --permissiveSearch Match filename using looser criteria
-s, --srcDir=<sourceDir> The Cobol source directory
-t, --strict Force strict validation, verify all variable
usages are valid
-V, --version Print version information and exit.
To run the interpreter, use the interpret command, like in the example below. Most of the options overlap with other commands.
java -jar smojol-cli/target/smojol-cli.jar interpret test-exp.cbl --srcDir /Users/asgupta/code/smojol/smojol-test-code --copyBooksDir "/Users/asgupta/code/smojol/smojol-test-code" --dialectJarPath /Users/asgupta/code/smojol/che-che4z-lsp-for-cobol-integration/server/dialect-idms/target/dialect-idms.jar --dialect COBOL --resolveTactic=CONSOLE
The resolveTactic parameters are as below:
YES: Automatically resolved every condition to TRUENO: Automatically resolved every condition to FALSECONSOLE: Wait for user input on the command line to resolve the condition.Yimplies TRUE, all other values resolve to FALSE.EVAL: Actually evaluate the condition based on the expressions in it. This is a Work in Progress.
The help text for the interpret command is reproduced below.
Usage: app interpret [-hpV] [-d=<dialect>] [-dp=<dialectJarPath>]
-s=<sourceDir> [-t=<resolutionTactic>] -cp=<copyBookDirs>[,
<copyBookDirs>...] [-cp=<copyBookDirs>[,
<copyBookDirs>...]]... <programName>
Interprets the COBOL source
<programName> The program to analyse
-cp, --copyBooksDir=<copyBookDirs>[,<copyBookDirs>...]
Copybook directories (repeatable)
-d, --dialect=<dialect> The COBOL dialect (COBOL, IDMS)
-dp, --dialectJarPath=<dialectJarPath>
Path to dialect .JAR
-h, --help Show this help message and exit.
-p, --permissiveSearch Match filename using looser criteria
-s, --srcDir=<sourceDir> The Cobol source directory
-t, --resolveTactic=<resolutionTactic>
The condition resolution strategy (YES, NO,
CONSOLE, EVAL)
-V, --version Print version information and exit.
NOTE: The API is under active development, and may be subject to change.
The simplest way to invoke tasks associated with the CodeTaskRunner through the API is using CodeTaskRunner, like so:
UUIDProvider idProvider = new UUIDProvider();
Map<String, List<AnalysisTaskResult>> result = new CodeTaskRunner("/path/to/src",
"/path/to/report",
ImmutableList.of(new File("/path/1/to/cpy"),
new File("/path/2/to/cpy"),
new File("/path/3/to/cpy")), "/path/to/dialect-idms.jar",
LanguageDialect.IDMS, new FullProgram(FlowchartOutputFormat.PNG, idProvider), idProvider, new OccursIgnoringFormat1DataStructureBuilder(),
new ProgramSearch(),
new LocalFilesystemOperations())
.runForPrograms(ImmutableList.of(
BUILD_BASE_ANALYSIS,
DRAW_FLOWCHART),
ImmutableList.of("test-exp.cbl"));
The above performs the base analysis and then the actual analysis we are interested, namely, building the transpilation model. There are a lot of dependencies needing to be specified as of now; simpler defaults will be added going forward.
Depending upon the number of tasks invoked, the result will contain a list of AnalysisTaskResult objects, which can be either AnalysisTaskResultOK or AnalysisTaskResultError. You can use them to determine what you want to do.
Please note that ```BUILD_BASE_ANALYSIS` will always be the first task to be run before any of the following tasks, whether specified or not. Thus, the results of any actual analysis will always start from the second element.
This invocation uses some specific conventions when deciding where to output file artifacts under the report-dir directory.
If you want more fine-grained control of the location of output artifacts, you can use the SmojolTasks class, which gives you more configurability in exchange for having to provide more detailed specifications.
NOTE: For all analyses, specifying the OccursIgnoringFormat1DataStructureBuilder class is preferable to prevent extra noise that can be generated when creating arrays for structures using OCCURS clauses. However, the DefaultFormat1DataStructureBuilder should be specified when running the interpreter, because that will require the correct number of elements in array data structures.
Programmatic examples are provided in the following classes.
- See
FlowChartBuildMainfor examples of how flowcharts are created. - See
InterpreterMainfor an example of how to run the interpreter on your code, as well as inject execution traces into Neo4J. - See
GraphExplorerMainfor an example of how to inject ASTs, data structures, and CFGs into Neo4J. - See
DependencyBuildMainfor an example how inter-program dependencies can be injected into Neo4J. - See
ValidateProgramMainfor an example of how to run validation through code. - See
TranspilerInstructionIntervalAnalysisMainandBasicBlockIntervalAnalysisMainfor examples of how T1-T2 analysis is run onTranspilerInstructions andBasicBlocks, respectively. - See
DominatorAnalysisMainfor an example of how reducibility is tested using DJ trees. - See
ImproperSCCsMainfor an example of how detection of improper Strongly Connected Components is run. - See
LoopBodyDetectionMainfor an example of how loop bodies are detected. - See
ReachingConditionBuildMainfor an example of how reaching conditions are calculated. - See
EliminateGotoMainfor an example of howGO TOs are eliminated.
You can specify a custom logging settings file by adding -Djava.util.logging.config.file option. if not specified, a default logging.properties will be loaded, with INFO as the default level.
This is a list of algorithms written from scratch, for reference or reuse. All of them use JGraphT for representing graph structures.
- Depth First Ordering (Pre- and Post-Order): Based on Depth-First Search and Linear Graph Algorithms. See
DepthFirstTraversalLabelTask. This does the following things:- Generate the explicit depth-first ordering of nodes
- Generate the depth-first spanning tree
- Generates discovery timestamps for determining node ancestry
- Classifies all edges in the source graph as Tree Edges, Forward Edges, Back Edges, and Cross Edges.
- Generates toplogical ordering for acyclic graphs
- Finding Dominators (All and Immediate): Based on Graph-Theoretic Constructs for Program Control Flow Analysis - Allen and Cocke. See
BuildDominatorsTask. - Interval Analysis via T1-T2 Transforms: Based on Characterizations of Reducible Flow Graphs - Hecht and Ullman. See
IntervalAnalysisTask. - Building DJ Trees: Based on the algorithm in A Linear Time Algorithm for Placing Phi-Nodes. See
BuildDJTreeTask. This task creates edges of three types:DominatorEdge,BackJoinEdge, andCrossJoinEdge. - Reducibility Testing using DJ Graphs: Uses DJ Trees as above. See
ReducibleFlowgraphTestTask. - Reducible and Irreducible Loop Body detection: Based on Identifying Loops Using DJ Graphs. See
LoopBodyDetectionTask. - Graph Slicing: Based on No More Gotos: Decompilation Using Pattern-Independent Control-Flow Structuring and Semantics-Preserving Transformations. See
GraphSliceTask. - Tree Zipper: Based on the zipper data structure used for manipulating locations in data structures. This implementation focuses on trees. The
BridgeZipperexpects nodes to be of the parameterised interfaceGenericTreeNode(which contain generic Java lists of children), whereas theNativeZipperexpects nodes of the parameterised interfaceZipperNodewhich uses native VAVR lists to store children. They are similar, otherwise.
- This toolkit is distributed under the MIT License. However, the Eclipse Cobol Parser project is distributed under the Eclipse Public License V2. Accordingly, all modifications to the parser fall under the EPL v2 license, while the toolkit proper falls under the MIT License.
- The gSpan algorithm implementation is taken from https://github.com/betterenvi/gSpan, which is also under the MIT License.
- The
RuntimeTypeAdapterFactoryclass code is taken from Google's gson-extras repository. It is under the Apache License v2.0.
- This was built based on a time-boxed PoC, and thus isn't well-covered by tests yet. More are being added on an ongoing basis.
- Cobol is a large language, and thus the interpreter's capabilities are not exhaustive. However, the hope is that the subset currently present is useful enough to get started with reverse engineering legacy code. Obviously, more capabilities are being added on an ongoing basis.
- Visual indicators in picture clauses, like
-,,, andZare currently ignored.
- IDMS
SCHEMA SECTIONget translated toDataDivisionContextnodes which have the word_SCHEMA_as the leading word in their textual description. However, this is not present in the correct childDialectNodeFillerContextnode. - Expressions in general identifiers (
LENGTH OF..., etc.) return static values. References to special registers resolve the variable reference (for dependency computations) only resolve one level down.
-
Code Structure and Structural Programming
- Structured Program Theorem
- Advanced Compiler Design and Implementation by Steven Muchnik
- Solving the structured control flow problem once and for all
- Compilers: Principles, Techniques, and Tools by Aho, Sethi, Ullman
- Control Flow Analysis slides
- No More Gotos: Decompilation Using Pattern-Independent Control-Flow Structuring and Semantics-Preserving Transformations
- Taming Control Flow: A Structured Approach to Eliminating Goto Statements
-
COBOL-specific refactoring
-
Dominator Algorithms
-
Reducibility
-
COBOL References
-
Graph Theory
-
UI
You will need the following set up on your local machine.
- SQLite3 for the database
- Liquibase for DB migrations
- NodeJS with
npm
These steps assume that Liquibase is installed and available on your path.
- You can start with a fresh DB by running
create-db.sh. - Run
up-db.sh. - Running
down-1-db.shrolls back the most recent migration. - Running
reset-db.shrolls the database all the way back before any migrations were run.
- You will need some data to be set up to actually see something in the app. You can run
BackendPipelineMainto do this.
Depending upon if you are developing the app or packaging it for production, you can run one of the following steps.
Make sure that the app is already built as described in How to Build.
To run the app locally in development mode, go to smojol-app/cobol-lekt and run npm run serve. This should start the development server (8080 by default).
Finally, start the API server (starts on port 7070, if PORT is not specified):
PORT=<port> DATABASE_URL=jdbc:sqlite:/path/to/db/file DATABASE_USER="<db_user>" DATABASE_PASSWORD="<db-password>" java -jar smojol-api/target/smojol-api.jar
The development server proxies calls to api/* to localhost:<port>, thus bypassing CORS restrictions.
If you are deploying the UI to be served by the API itself, run:
scripts/build-all.sh
Start the API server (starts on port 7070, if PORT is not specified):
PORT=<port> DATABASE_URL=jdbc:sqlite:/path/to/db/file DATABASE_USER="<db_user>" DATABASE_PASSWORD="<db-password>" java -jar smojol-api/target/smojol-api.jar
Hit localhost:<port>, and you should see the app.
The screenshot below shows the flowchart generated from the original COBOL source of the program.
The screenshot below shows nodes which comprise natural loops (both reducible and irreducible) highlighted in amber as part of the Control Flowgraph.
The screenshot below shows an example of nested natural loops. The deep purple nodes at the bottom form an inner loop which is in turn nested inside a bigger loop consisting of nodes highlighted in green (and of course, the nodes of the inner loop).
The screenshot below shows the user navigating through the AST of the intermediate source.
The screenshot below shows the IR source with all GO TOs eliminated. The only jumps which remain would be translated directly into break and continue statements in structured programming languages.
The rest of this file is mostly technical notes for my personal documentation.
| Sym-1 / Sym-2 | S (Sign) | P (Left) | P (Right) | V (Decimal Point) | X (Alphanumeric) | 9 (Number) |
|---|---|---|---|---|---|---|
| S (Sign) | - | X | X | X | - | - |
| P (Left) | - | X | - | X | - | X |
| P (Right) | - | - | X | - | - | - |
| V (Decimal Point) | - | - | X | - | - | X |
| X (Alphanumeric) | - | - | - | - | X | X |
| 9 (Number) | - | - | X | X | X | X |
- Sentences which are GO TO need to not connect with the immediate next sentence in the code. The internal flow branches off correctly.
dot -Kdot -v5 -Gsize=200,200\! -Goverlap=scale -Tpng -Gnslimit=4 -Gnslimit1=4 -Gmaxiter=2000 -Gsplines=line dotfile.dot -oflowchart-level5.png
These are some other commands tried on larger graphs:
dot -Kneato -v5 -Tpng dotfile.dot -oflowchart-level5.pngdot -Kdot -v5 -Gsize=200,200\! -Goverlap=scale -Tpng -Gnslimit=2 -Gnslimit1=2 -Gmaxiter=2000 -Gsplines=line dotfile.dot -oflowchart-level5.pngdot -Kfdp -v5 -Goverlap=scale -Gsize=200,200\! -Tpng dotfile.dot -oflowchart-level5.pngdot -Ktwopi -v5 -Gsize=200,200\! -Tpng dotfile.dot -oflowchart-level5.png
dot -Kdot -v5 -Gsize=200,200\! -Goverlap=scale -Tpng -Gnslimit=4 -Gnslimit1=4 -Gmaxiter=2000 -Gsplines=line dotfile.dot -oflowchart-level5.png
