Duplicator 6 Firmware - Marlin 1.1.0-RC8 by dot_bob (Robert Mendon)

Installation:

See the include pdf document for firmware install instructions.

Changes:

Version 1.1.0-RC8 01-23-17 (Initial Release) Version 3

• Added LED lighting setting to EEPROM.
• Added LED dimming setting to the Control Menu.
• Added confirm to stop print when printing with sd card.
• Fixed a bug in the stop print function by adding code to shutdown the hotend and heatbed.
• Added the ability to adjust stepper driver current from the Control -> Motion lcd menu.
• Added auto leveling grid positions from marlin development repository.
• Changed menu selection from hollow box to inverted text.
• Changed the menu beep from 100ms to 5ms.
• Updated Conditionals_post.h so the #define XXXXXX_PROBE_BED_POSITION statements are no longer needed .
• Enabled the LCD info menu.
• Changed the move axis menu to select the axis first and distance second.
• Relocated the move axis menu item to the top of the prepare menu.
• Added filament change option to the prepare menu.
• Reduced the duration of the filament change beep from 300ms to 20ms.

Version 1.1.0-RC8 01-16-17 (Initial Release) Version 2

• Fixed many display issues and improved responsiveness.
• Added Support for the LED light
• Added adjusting stepper driver currents with command M907 and saving in EEPROM and supported in commands M500, M502, M503;
• Removed Babystep for X and Y axis.

Version 1.1.0-RC8 01-16-17 (Initial Release) Version 1

• Increased the display menu timeout from 15 seconds to two minutes by changing the line "#define LCD_TIMEOUT_TO_STATUS 15000" to "#define LCD_TIMEOUT_TO_STATUS 120000" in the file ultralcd.h.
• Added "Babystep Z" to the Main Menu when performing a print. This allows the user to quickly access the the realtime z height ajustment.

Recommeded GCode scripts:

; Duplicator 6 / Monoprice Maker Ultimate Start Script V3 M107 ; start with the fan off G28 ; home ;G29 ; probe bed G1 Z15 F3600 ; move the platform 15mm down from home G0 X0 Y0 ; Rapid move X0 Y0 G92 E0 ; zero the extruded length ; perform wipe and prime G1 X8.0 Z0.0 F3600
G1 X10.0 Z0.2 F3600 G1 X70 Z0.4 E9.0 F1000 ; prime G1 X100.0 E22 F1000 ; prime G1 X130 Z0.2 F9000 ; pull away wipe G1 X140 F9000 ; finish wipe G1 Z2 F1000 ; lift head before first move G1 X100 Y100 F5000 ; Move nozzle to center of bed G92 E0 ; zero extruder again ; Place printing message on LCD screen M117 Printing...

; Duplicator 6 / Monoprice Maker Ultimate Stop Script V2 G92 E0 ; zero the extruded length G1 E-1.5 F500 ; retract the filament to release some of the pressure M104 S0 ; turn off heater M140 S0 ; turn off bed M106 S0 ; turn off part fan G91 ; relative positioning G1 Z3 ; lower build plate a few mm G90 ; absolute positioning G28 X0 Y0 ; move head out of the way G1 Z170 F9000 ; lower build plate M84 ; disable stepper motors