Printer: Voron 2.4 300x300mm RC1 (Modded partly to RC2)

OS: Debian GNU/Linux 12 (bookworm)

Hardware

• Fysetc Spider V1.1
• Fysetc Canbus Expander
• Raspberry 4
• KNOMI V2

Slicer: OrcaSlicer

Plugins:

• Crowsnest (Installed by Kiauh)
• Klippain-ShakeTune (https://github.com/Frix-x/klippain-shaketune)
• Klipper (Installed by Kiauh)
• Led_effect (https://github.com/julianschill/klipper-led_effect/tree/master)
• Mainsail (Installed by Kiauh)
• Moonraker (Installed by Kiauh)
• Happy Hare (https://github.com/moggieuk/Happy-Hare/)

Mods:

• Rainbow BARF Logo LED for StealthBurner
• Umbilical PG7
• BTT SB2209 RP2040
• BTT KNOMI V2
• ERCF V2 (Not finished yet)

Reference URLS:

Thanks to all this stuff:

• https://github.com/julianschill/klipper-led_effect/tree/master
• https://github.com/dw-0/kiauh
• https://github.com/Esoterical/voron_canbus/tree/main/mainboard_flashing
• https://github.com/Esoterical/voron_canbus
• https://github.com/Esoterical/voron_canbus/tree/main/toolhead_flashing/common_hardware/BigTreeTech%20SB2209%20(RP2040)
• https://github.com/EricZimmerman/Voron-Documentation/blob/main/community/howto/EricZimmerman/BackupConfigToGithub.md
• https://github.com/bigtreetech/KNOMI/tree/master/KNOMI2
• https://github.com/Enraged-Rabbit-Community/ERCF_v2
• https://github.com/moggieuk/Happy-Hare/
• https://www.printables.com/model/662739-voron-mgn9-endstop-carriage-cw2
• https://www.printables.com/model/541874-umbilical-pg7-anchor-mod-large-gear-clockwork-2
• https://www.printables.com/model/363657-voron-v24-rear-umbilical
• https://www.printables.com/model/642714-fysetc-stealthburner-led-carrier-for-neopixel-rain

Contact For questions contact me at discord: embitje