Skip to content
/ XiaoMi-Air-6200U Public

Hackintosh Xiaomi Mi Air 13.3 Skylake-U 2016 for macOS Catalina & Mojave & High Sierra

67 stars 17 forks Branches Tags Activity
Star
Notifications You must be signed in to change notification settings

sakoula/XiaoMi-Air-6200U

BranchesTags

Repository files navigation

Hackintosh Xiaomi Mi Air 13.3 Skylake-U 2016 for macOS Big Sur & Catalina

Hackintosh your XiaoMi Air 13.3 Skylake-U 2016. This is intented to create a fully functional hackintosh for the Xiaomi Mi Notebook Air 13.3'' i5-6200U (Skylake-U 2016).

Important Notes

up up up

  • This guide is for the XiaoMi Air 13.3 Skylake-U 2016. It will probably work on the XiaoMi Air 13.3 Kaby Lake-R 2018 models with minor modifications.
  • Following this guide you can run Big Sur 11.0.1, 11.1. and Catalina 10.5.x up to 10.15.7
  • I stopped using Clover. This guide is for OpenCore only. If you need to run Clover for any reason you can check the older Clover Guide
  • All files used and detailed readmes are located in github sakoula/XiaoMi-Air-6200U
  • The guide will work for either BIOS A05 or BIOS A06. Bios A09 has NOT been tested
  • macOS has been installed on a different disk on the second M.2 port of the laptop. I have no experience of having both Windows and macOS on a single disk. In order to boot to macOS you use F12 upon power on and select the boot device.
  • In order to be able to help you please provide full debug information useing the excellent black-dragon74/OSX-Debug tool.
  • Support and Discussion on this guide can be found at tonymacx86.com

Please note that this guide will be not possible without all the excellent resources:

What's working

up up up

  • Sleep (sleep works only by selecting sleep on the apple menu)
  • Bluetooth
  • Internal WiFi card. see Wi-Fi section
  • Proper CPU PowerManagement
  • Proper USB Support
  • Dual boot (windows and macOS on different disks) through OpenCore
  • Running with SIP enabled

What's not working

up up up

  • Discrete GPU (Nvidia GeForce 940MX GPU )
  • No audio output from HDMI port
  • lid sleep does not always work. A working workaround is to always sleep from the menu and wait for the laptop to go to sleep prior closing the lid. You can wake the laptop by opening the lid
  • Shutdown is not working as expected. The on/off button's led stays up and the keyboard light is on when touching it. In order to switch off you have to hold the shutdown key for 4 seconds.

If you face another problem please open a issue.

Hardware Specifications

up up up

  • Skylake-U 2016
  • Xiaomi Mi Notebook Air 13.3''
  • Bios vers A06
  • CPU Intel Core i5-6200U / 2.7GHz max / Dual core, 4 threads / 3MB L3 cache
  • Motherboard: Timi TM1613 (U3E1)
  • GPU: HD Graphics 520
  • GPU: Nvidia GeForce 940MX GPU / 1G GDDR5 RAM, frequency 5GHz
  • Memory: 8192 MB DDR4 2133 MHz, single-channel, firmly fitted
  • Display: 13.3 inch 16:9, 1920 x 1080 pixel 166 PPI, Samsung LTN133HL09-M01, IPS, glossy: yes
  • Samsung PM951 NVMe MZVLV256, 256 GB (on first SLOT which is PCie/NVMe)
  • Samsung 850 Evo Series, 500GB M.2 SSD (MZ-N5E500BW) (on second SLOT which is SATA) (for macOS)
  • WIFI: Intel Dual Band Wireless-AC 2x2 Network / 2.4GHz and 5GHz dual-band WiFi / 802.11ac / 802.11b/g/n / 867Mbps max
  • Bluetooth: Bluetooth 4.1 wireless technology
  • Connectivity: USB Type-C charging port, 2Ă— USB 3.0, 1Ă— HDMI, 3,5 mm audio jack

Table of Contents

up up up

Installation Guide

up up up

These are the steps in order to install or upgrade your Mi. There is a very detailed document on the steps followed and the customizations which can be found in DETAILS.md.

There is a another document on how I setup my environment including all the tools and utilities I have used ENVIRONMENT.air.md.

Start by downloading the latest version the customization files from the releases page. It includes:

  • AIR_EFI/: efi directory including all kexts and customization needed

The guide is being written based on the excellent Dortania guides

Installation SSD

up up up

I installed a Samsung 850 Evo Series, 500GB M.2 SSD (MZ-N5E500BW) specifically for macOS on the second M.2 port. Use F12 to boot from a specific device.

Preparing USB Flash Drive

up up up

Get a at least 16GB USB Flash Drive and follow Creating the USB > Making the installer. Follow just the Making the installer Guide.

Or could follow this guide,if you need Big Sur,you can direct download.

If you need just a USB stick with OpenCore installation for booting an existing MacOS installation just format the USB stick as following:

Disk Utility > Select USB Device > Erase:

  • Scheme = GUID Partition Map
  • Name: OC
  • Format: macOS Extended (Journaled)

Customize USB Flash Drive

up up up

In this step you will add all the required opencore files to the USB flash drive.

Download the latest release from github and unzip the archive. You will find an AIR_EFI directory. Mount the USB Flash Drive's EFI partition on /Volumes/EFI. You can do this with many utilities (e.g. MountEFI or mount_efi.sh).

Move the AIR_EFI to /Volumes/EFI and rename it to EFI. It will look like /Volumes/EFI/EFI

Generate a valid SMBIOS

up up up

Use corpnewt/GenSMBIOS to generate a valid MacBookPro13,1 SMBIOS and populate the following /Volumes/EFI/OC/config.plist with a text editor or corpnewt/ProperTree:

<key>PlatformInfo</key>
<dict>
    ...
    <key>MLB</key>
    <string>XXXXXXXXXXXXXXXXX</string>
    ...
    <key>SystemSerialNumber</key>
    <string>XXXXXXXXXXXX</string>
    ...
    <key>SystemUUID</key>
    <string>XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX</string>
    ...
</dict>

a valid SMBIOS is really important for Apple Services, iMessage & FaceTime. Check also the guide An iDiot's Guide To iMessage

Disable Secure Boot

up up up

Hold F2 to get into the BIOS. In order to disable the secure boot you need to set a supervisor BIOS password. Use root as a password. Without exiting disable the secure boot. Then change the supervisor password and do not enter a new one. This will disable it. Exit BIOS saving the options.

You do not have to change anything else from the defaults

Unlock CFG Lock

up up up

CFG Lock removal is required.

This procedure is verified for BIOS A06. It has not been tested in any other BIOS. Proceed at your own risk.

Follow Fixing CFG Lock. The right offset is 0x84A. The steps are:

If your BIOS version is A05, you can upgrade to A06 and direct use above value(0x84A).

  1. boot from the USB drive

  2. On the opencore menu hit Space. You will see a number of options

  3. select Modified GRUB Shell. On the prompt you will type:

setup_var 0x84A

Only if you do not get any type of error type the following to unlock CFG:

setup_var 0x84A 0x00
  1. reboot and boot from the USB drive again. On the OpenCore menu hit Space. Then Select VerifyMSRE2.efi. This will verify whether CFG is unlocked.

Note: If you change any settings on the BIOS or flash a new BIOS you should always redo this procedure again.

Install macOS

up up up

During the first time you boot you must clear the NVRAM of the system (Clover and other Bootloader leave traces)

To boot from the USB Flash Drive you can just hit F9 and you will get the UEFI boot loader. Once you get to Clover hit space and select CleanNvram.efi. After it completes power off the computer wait for ten seconds and power on again.

Boot again and Install macOS

Post Install

up up up

At this point OpenCore boot loader is installed only in the USB driver. You are required to install it on your bootable disk. Follow Moving OpenCore from USB to macOS Drive

Enable TRIM for SSDs

up up up

Since OpenCore does not reccomends to patch for TRIM using the bootloader you need to enable TRIM for all SSDs manually. Open terminal and use command: sudo trimforce enable. Reboot and check that TRIM is enabled on the Apple > About this Mac > System Report.

Clover to OpenCore Migration

up up up

This section is for those who run Clover and want to migrate to OpenCore. You need to:

  1. make sure you have a backup USB flash drive with clover in order to boot your system. Check README.clover.md. If something goes wrong you may end up with an unbootable system! You have been warned!

  2. Create a USB flash drive without the macos installer. check Preparing USB Flash Drive and Customize USB Flash Drive.

  3. Remove Clover. Check Converting from Clover to OpenCore. TLDR you need to Cleaning the Clover Junk in macOS and Removing kexts from macOS(S/L/E and L/E)

  4. Most likely you will hit the stuck on OCB: LoadImage failed - Security Violation. Follow the link and fix it now. Do not disable SecureBootModel. Follow the terminal instructions

  5. Boot from the USB and Clear the NVRAM. Check Install macOS section.

  6. Boot from the USB flash drive. Make sure you have a working system

  7. Move OpenCore from USB to macOS Driver. Check Post Install

Sleep

up up up

make sure that you type the following on the terminal based on (Fixing Sleep)

check your current state:

$ sudo pmset -g

and type

sudo pmset autopoweroff 0
sudo pmset powernap 0
sudo pmset standby 0
sudo pmset proximitywake 0
sudo pmset lidwake 0

Upgrade Guide

up up up

Upgrade from Catalina 10.15.3 to Catalina 10.15.7

up up up

Upgrade from within macOS. No special action is needed

Upgrade to Big Sur 11.0.1

up up up

Use the latest release from here boot in Catalina and upgrade.

Postinstallation Steps

up up up

Enable HiDPI resolutions

up up up

I am using the computer using the 1600x900 resolution that fits my eyes best.

You can enable HiDPI resolutions using the amazing script one-key-hidpi. However since native max resolution of the LCD is 1920x1080 it does not make any sense. HiDPI will look huge on screen and the 1920x1080 HiDPI will not seem any different and will make the computer slower. 1920x1080 HiDPI will create a 3840x2160 virtual screen that will map it to a 1920x1080 display, so it does not help much.

If you still want to use HiDPI get the avibrazil/RDM tool if you cannot see all the available resolutions.

Install ALCPlugFix 🍦

up up up

  • Install ALCPlugFix is work in progress to solve the wake up with headphones problem

Wi-Fi

up up up

The card in the laptop is Intel® Dual Band Wireless-AC 8260

Support to the Wifi card has been condifured using itlwm and not AirportItlwm (does not support hidden networks).

You will need to install OpenIntelWireless/HeliPort as well.

You can also use USB dongles but this is not reccomended anymore. TP-LINK TL-WN725N v3 and Archer T3U has been used succesfully in the past. Drivers for those can be downloaded from TP-LINK site or chris1111/Wireless-USB-Adapter.

In the case you migrate from a USB dongle with NullEthernet to native wifi support you need to force macOS to rewnumerate the interfaces. Check Fixing En0.

In short you need to open terminal write the following and then reboot:

sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
sudo rm /Library/Preferences/SystemConfiguration/preferences.plist

Headphone Port

up up up

The is a problem with the headphone port and does not always work. You need to install hackintosh-stuff/ComboJack and follow the instructions on github.

Changelog

up up up

You can view Changelog for detailed information.

Benchmarking

up up up

Benchmarking Windows 10

  • GeekBench x64 4.0.3 CPU 2550/5551
  • CINEBENCH R15.038_RC184115 OpenGL 56.92fps (NVIDIA)
  • CINEBENCH R15.038_RC184115 OpenGL 36.45fps (Intel)
  • CINEBENCH R15.038_RC184115 CPU 295cb
  • LuxMark-v3.1 OpenCL GPU 3710 (Intel + NVIDIA)
  • LuxMark-v3.1 OpenCL GPU 1427 (Intel)
  • LuxMark-v3.1 OpenCL GPU 2354 (NVIDIA)
  • LuxMark-v3.1 OpenCL CPU 860
  • Heaven FPS 20.3 Score 512 Min FPS 7.8 Max FPS 40.4 (NVIDIA)
  • Heaven FPS 9.1 Score 230 Min FPS 5.5 Max FPS 20.1 (Intel)

Benchmarking macOS 10.14.2 (Clover)

  • GeekBench x64 4.3.2 CPU 3470/6695
  • GeekBench x64 4.3.2 GPU/OpenCl 16465
  • GeekBench x64 4.3.2 GPU/Metal 16748
  • CINEBENCH R15.038_RC184115 OpenGL 22.92fps
  • CINEBENCH R15.038_RC184115 CPU 293cb
  • LuxMark-v3.1 OpenCL GPU 1381
  • LuxMark-v3.1 OpenCL CPU 776
  • Heaven FPS 13.8 Score 349 Min FPS 6.2 Max FPS 25.3
  • AJA System Test Lite (with trim) Samsung SSD 850 EVO M.2 500GB: 469MB/sec write, 489MB/sec read

Benchmarking macOS 10.15.3 (JahStories CPUFriendProvider) (Clover)

  • GeekBench x64 4.3.2 CPU 3356/6486
  • GeekBench x64 4.3.2 GPU/OpenCl 23481
  • GeekBench x64 4.3.2 GPU/Metal 16968
  • CINEBENCH R15.038_RC184115 OpenGL 22.26fps
  • CINEBENCH R15.038_RC184115 CPU 268cb
  • LuxMark-v3.1 OpenCL GPU 1465
  • LuxMark-v3.1 OpenCL CPU 776
  • Heaven FPS 13.4 Score 336 Min FPS 6.0 Max FPS 22.9 (fullscreen/Quality:Medium/Tessellation:Disabled/Anti-aliasing:off/Stereo3D:Disabled)
  • AJA System Test Lite (with trim) Samsung SSD 850 EVO M.2 500GB: 474MB/sec write, 494MB/sec read

Benchmarking macOS 10.15.3 (corpnewt/CPUFriendFriend LFM=08/EPP=80) (Clover)

  • GeekBench x64 4.3.2 CPU 3348/6462
  • GeekBench x64 4.3.2 GPU/OpenCl 23762
  • GeekBench x64 4.3.2 GPU/Metal 17023
  • CINEBENCH R15.038_RC184115 OpenGL 22.33fps
  • CINEBENCH R15.038_RC184115 CPU 286cb
  • LuxMark-v3.1 OpenCL GPU 1460
  • LuxMark-v3.1 OpenCL CPU 771
  • Heaven FPS 13.2 Score 333 Min FPS 5.9 Max FPS 24.7 (fullscreen/Quality:Medium/Tessellation:Disabled/Anti-aliasing:off/Stereo3D:Disabled)
  • AJA System Test Lite (with trim) Samsung SSD 850 EVO M.2 500GB: 466MB/sec write, 497MB/sec read

Benchmarking macOS 10.15.7 (corpnewt/CPUFriendFriend LFM=08/EPP=80/PerfBias=05) (OpenCore)

  • GeekBench x64 4.3.2 CPU 2302/5634 (first time)
  • GeekBench x64 4.3.2 CPU 3401/6367 (second time is better because of adapting power)
  • GeekBench x64 4.3.2 GPU/OpenCl 24058
  • GeekBench x64 4.3.2 GPU/Metal 15649
  • CINEBENCH R15.038_RC184115 OpenGL 22.49fps
  • CINEBENCH R15.038_RC184115 CPU 283cb
  • LuxMark-v3.1 OpenCL GPU 1415
  • LuxMark-v3.1 OpenCL CPU 761
  • Heaven FPS 13.3 Score 335 Min FPS 5.9 Max FPS 21.1 (fullscreen/Quality:Medium/Tessellation:Disabled/Anti-aliasing:off/Stereo3D:Disabled)
  • AJA System Test Lite (with trim) Samsung SSD 850 EVO M.2 500GB: 479MB/sec write, 498MB/sec read

FAQ

up up up

Disabling SIP

up up up

Disabling SIP

OCB: LoadImage failed - Security Violation

up up up

Users may find upgrading OpenCore on an already installed system can result in early boot failures due to Security > SecureBootModel > Default OCB: LoadImage failed - Security Violation

MacOS installer thinks I am russian

up up up

macOS installer in Russian

OpenCore Sanity Checker

up up up

make sure to check your config.plist against OpenCore Sanity Checker

Make Changes on the root filesystem

up up up

Apple has introduce SSV (signed system volumes). SSV features a kernel mechanism that verifies the integrity of the system content at runtime, and rejects any data — code and non-code — that doesn’t have a valid cryptographic signature from Apple. In order to make root volume writable you need to disable, mount it, change it, create a new snapshot and boot from that snapshot. I am not responsible if you make your machine unbootable. This may break OS updates. Check how to do it @ macOS 11 Big Sur and Mount root as writable in Big Sur

Note: For some reason bless is not working with errors like:

sudo bless --folder /Users/xxx/mount/System/Library/CoreServices --bootefi --create-snapshot
Couldn't copy file "/Users/xxx/mount/System/Library/CoreServices/boot.efi.j137ap.im4m" - Error Domain=NSCocoaErrorDomain Code=513 "“boot.efi.j137ap.im4m” couldn’t be copied because you don’t have permission to access “CoreServices”." UserInfo={NSSourceFilePathErrorKey=/System/Volumes/Preboot/525BE91F-EBD8-3CBD-9774-952E4F6FC515/usr/standalone/i386/boot.efi.j137ap.im4m, NSUserStringVariant=(
    Copy
), NSDestinationFilePath=/Users/xxx/mount/System/Library/CoreServices/boot.efi.j137ap.im4m, NSFilePath=/System/Volumes/Preboot/525BE91F-EBD8-3CBD-9774-952E4F6FC515/usr/standalone/i386/boot.efi.j137ap.im4m, NSUnderlyingError=0x7f94b8d13c30 {Error Domain=NSPOSIXErrorDomain Code=1 "Operation not permitted"}}

Instead of bless you can do the following:

Steps:

  1. Boot from recovery and disable SSV (this will be permanent)
csrutil authenticated-root disable
  1. Boot on macos and mount your root volume as writable. Find your root mount's device - run mount and chop off the last s, e.g. if your root is /dev/disk1s2s3, you'll mount /dev/disk1s2
$ mount
/dev/disk2s5s1 on / (apfs, sealed, local, read-only, journaled)
$ mkdir /Users/xxx/mount
sudo mount -o nobrowse -t apfs /dev/disk2s5 /Users/xxx/mount

  1. Make any modifications you want in /Users/xxx/mount

  2. Generate and tag new APFS System Snapshot as follows and make it bootable

# Create snapshot.
sudo /System/Library/Filesystems/apfs.fs/Contents/Resources/apfs_systemsnapshot -s "ChangedRoot" -v /Users/xxx/mount

# Tag snapshot for next boot.
sudo /System/Library/Filesystems/apfs.fs/Contents/Resources/apfs_systemsnapshot -r "ChangedRoot" -v /Users/xxx/mount

  1. reboot and you are done

  2. check the snapshots

$ diskutil apfs snapshots disk2s5s1
Snapshots for disk2s5s1 (3 found)
|
+-- AFD82B0C-23D3-481B-9401-0A17DC46C1EC
|   Name:        com.apple.os.update-779BDF1556C6F688504E24FB29C75AFFABFCB91E701806FFFF35235E19914F1E
|   XID:         489684
|   Purgeable:   No
|   NOTE:        This snapshot limits the minimum size of APFS Container disk2
|
+-- 4A6FACBE-2667-4127-8143-646C38E3C3B4
|   Name:        ChangedRoot
|   XID:         490985
|   Purgeable:   Yes
|
+-- 3DC0C93D-F858-4420-AC0B-49FDF23D5C3A
    Name:        NewRoot
    XID:         9223372036855268389
    Purgeable:   Yes
  1. you can always boot to another snapshot by doing
$ diskutil apfs snapshots disk2s5s1
$ mount
/dev/disk2s5s1 on / (apfs, sealed, local, read-only, journaled)
$ mkdir /Users/xxx/mount
$ sudo mount -o nobrowse -t apfs /dev/disk2s5 /Users/xxx/mount
$ sudo /System/Library/Filesystems/apfs.fs/Contents/Resources/apfs_systemsnapshot -r "com.apple.os.update-779BDF1556C6F688504E24FB29C75AFFABFCB91E701806FFFF35235E19914F1E" -v /Users/xxx/mount

reboot
  1. to delete a snapshot you need to boot into recovery
$ diskutil list
$ diskutil apfs snapshots disk2s5
$ diskutil apfs deleteSnapshot disk2s5 -name ChangedRoot

you cannot delete the bootable snapshot

  1. when upgrading it do idea whats will happen XXX

Making Symbolic Links on the root filesystem

up up up

Try Making Symbolic Links on the root filesystem

Changelog

up up up

You can view Changelog for detailed information.

Buy me a coffee or a beer

up up up

If you feel so you can buy me a coffee or a beer!

Credits

up up up

About

Hackintosh Xiaomi Mi Air 13.3 Skylake-U 2016 for macOS Catalina & Mojave & High Sierra

Resources

Readme
Activity

Stars

67 stars

Watchers

7 watching

Forks

17 forks
Report repository

Releases 9

v9.0 Latest
Jan 4, 2021
+ 8 releases

Packages

No packages published

Contributors 3

  •  
  •  
  •  

Languages