Skip to content

Make connector less fragile, move inside top/bottom enclosure #549

Make connector less fragile, move inside top/bottom enclosure

Make connector less fragile, move inside top/bottom enclosure #549

Workflow file for this run

name: Export Electronics
on:
push:
pull_request:
jobs:
export-electronics-classic:
name: Export Electronics (Sensor)
runs-on: ubuntu-20.04
steps:
- name: Checkout code
uses: actions/checkout@v2
- name: Set up outputs directory
run: mkdir -p electronics/build/outputs
- name: Install dependencies
run: ./electronics/scripts/dependencies.sh
# Sensor board:
- name: Export sensor schematic
run: |
./electronics/scripts/export_schematic.py electronics/sensor/sensor.sch
cp electronics/build/sensor.pdf electronics/build/outputs/sensor-schematic.pdf
cp electronics/build/sensor.png electronics/build/outputs/sensor-schematic.png
env:
PYTHONUNBUFFERED: 1
- name: Export sensor PCB fabrication files
run: |
./electronics/scripts/export_jlcpcb.py electronics/sensor/sensor.kicad_pcb
cp -r electronics/build/sensor-jlc electronics/build/outputs/sensor-jlc
- name: Export sensor PCB overview PDF
run: |
./electronics/scripts/generate_pdf.py electronics/sensor/sensor.kicad_pcb
cp electronics/build/sensor-pcb-packet.pdf electronics/build/outputs/sensor-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
- name: Panelize sensor PCB
run: |
kikit panelize -p electronics/scripts/config/kikit_panelize_sensor.json electronics/sensor/sensor.kicad_pcb electronics/build/panelized_sensor.kicad_pcb
- name: Export panelized sensor PCB SVG
run: |
./electronics/scripts/generate_svg.py electronics/build/panelized_sensor.kicad_pcb
cp electronics/build/panelized_sensor_merged.png electronics/build/outputs/sensor-panelized-pcb-raster.png
./scripts/annotate_image.sh electronics/build/outputs/sensor-panelized-pcb-raster.png
env:
PYTHONUNBUFFERED: 1
- name: Export panelized sensor PCB fabrication files
run: |
./electronics/scripts/export_jlcpcb.py electronics/build/panelized_sensor.kicad_pcb
cp -r electronics/build/panelized_sensor-jlc electronics/build/outputs/sensor-panelized-jlc
- name: Export panelized sensor PCB overview PDF
run: |
./electronics/scripts/generate_pdf.py electronics/build/panelized_sensor.kicad_pcb
cp electronics/build/panelized_sensor-pcb-packet.pdf electronics/build/outputs/sensor-panelized-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
- name: Archive artifacts
uses: actions/upload-artifact@v4
if: always()
with:
name: electronics-classic
path: |
electronics/build
- name: Configure AWS Credentials
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
uses: aws-actions/configure-aws-credentials@v1
with:
aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
aws-region: us-east-1
- name: Sync artifacts to S3
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
run: |
aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-classic --delete --acl public-read --cache-control max-age=0,no-cache
export-electronics-chainlink:
name: Export Electronics (Chainlink Driver)
runs-on: ubuntu-20.04
steps:
- name: Checkout code
uses: actions/checkout@v2
- name: Set up outputs directory
run: mkdir -p electronics/build/outputs
- name: Install dependencies
run: ./electronics/scripts/dependencies.sh
# Chainlink Driver:
- name: Export chainlinkDriver schematic
run: |
./electronics/scripts/export_schematic.py electronics/chainlinkDriver/chainlinkDriver.sch
cp electronics/build/chainlinkDriver.pdf electronics/build/outputs/chainlinkDriver-schematic.pdf
cp electronics/build/chainlinkDriver.png electronics/build/outputs/chainlinkDriver-schematic.png
env:
PYTHONUNBUFFERED: 1
- name: Render chainlinkDriver PCB 3D
run: |
./electronics/scripts/export_3d.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb --width 2000 --height 800 transform z+ z+ z+ z+ z+ z+ z+ z+ mr rx+ rx+ ry- ry- rz-
cp electronics/build/chainlinkDriver-3d.png electronics/build/outputs/chainlinkDriver-3d.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriver-3d.png
env:
PYTHONUNBUFFERED: 1
- name: Export chainlinkDriver JLCPCB fabrication files
run: |
./electronics/scripts/export_jlcpcb.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb --assembly-schematic electronics/chainlinkDriver/chainlinkDriver.sch --alt-fields LCSC_ALT_ULN2003A LCSC_ALT_SCREW_DIBO
cp -r electronics/build/chainlinkDriver-jlc electronics/build/outputs
- name: Export chainlinkDriver PCB overview PDF
run: |
./electronics/scripts/generate_pdf.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb
cp electronics/build/chainlinkDriver-pcb-packet.pdf electronics/build/outputs/chainlinkDriver-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
- name: Export chainlinkDriver PCB SVG
run: |
./electronics/scripts/generate_svg.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb
cp electronics/build/chainlinkDriver_merged.png electronics/build/outputs/chainlinkDriver-pcb-raster.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriver-pcb-raster.png
env:
PYTHONUNBUFFERED: 1
# Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
- name: Export BOM [chainlinkDriver]
uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e
with:
config: electronics/chainlinkDriver/chainlinkDriver.kibot.yml
dir: electronics/build
schema: 'electronics/chainlinkDriver/chainlinkDriver.sch'
board: 'electronics/chainlinkDriver/chainlinkDriver.kicad_pcb'
- name: Copy BOM outputs
run: cp -r electronics/build/bom electronics/build/outputs
- name: Archive artifacts
uses: actions/upload-artifact@v4
if: always()
with:
name: electronics-chainlink
path: |
electronics/build
- name: Configure AWS Credentials
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
uses: aws-actions/configure-aws-credentials@v1
with:
aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
aws-region: us-east-1
- name: Sync artifacts to S3
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
run: |
aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink --delete --acl public-read --cache-control max-age=0,no-cache
export-electronics-chainlink-tester:
name: Export Electronics (Chainlink Driver Tester)
runs-on: ubuntu-20.04
steps:
- name: Checkout code
uses: actions/checkout@v2
- name: Set up outputs directory
run: mkdir -p electronics/build/outputs
- name: Install dependencies
run: ./electronics/scripts/dependencies.sh
# Chainlink Driver Tester:
- name: Export schematic [chainlinkDriverTester]
run: |
./electronics/scripts/export_schematic.py electronics/chainlinkDriverTester/chainlinkDriverTester.sch
cp electronics/build/chainlinkDriverTester.pdf electronics/build/outputs/chainlinkDriverTester-schematic.pdf
cp electronics/build/chainlinkDriverTester.png electronics/build/outputs/chainlinkDriverTester-schematic.png
env:
PYTHONUNBUFFERED: 1
- name: Render PCB 3D [chainlinkDriverTester]
run: |
./electronics/scripts/export_3d.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ z+ mu mr mr rx+ rx+ ry- ry- rz-
cp electronics/build/chainlinkDriverTester-3d.png electronics/build/outputs/chainlinkDriverTester-3d.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriverTester-3d.png
env:
PYTHONUNBUFFERED: 1
- name: Export JLCPCB fabrication files [chainlinkDriverTester]
run: |
./electronics/scripts/export_jlcpcb.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb
cp -r electronics/build/chainlinkDriverTester-jlc electronics/build/outputs
- name: Export PCB overview PDF [chainlinkDriverTester]
run: |
./electronics/scripts/generate_pdf.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb
cp electronics/build/chainlinkDriverTester-pcb-packet.pdf electronics/build/outputs/chainlinkDriverTester-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
- name: Export PCB SVG [chainlinkDriverTester]
run: |
./electronics/scripts/generate_svg.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb
cp electronics/build/chainlinkDriverTester_merged.png electronics/build/outputs/chainlinkDriverTester-pcb-raster.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriverTester-pcb-raster.png
env:
PYTHONUNBUFFERED: 1
# Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
- name: Export BOM [chainlinkDriverTester]
uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e
with:
config: electronics/chainlinkDriverTester/chainlinkDriverTester.kibot.yml
dir: electronics/build
schema: 'electronics/chainlinkDriverTester/chainlinkDriverTester.sch'
board: 'electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb'
- name: Copy BOM outputs
run: cp -r electronics/build/bom electronics/build/outputs
- name: Archive artifacts
uses: actions/upload-artifact@v4
if: always()
with:
name: electronics-chainlink-tester
path: |
electronics/build
- name: Configure AWS Credentials
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
uses: aws-actions/configure-aws-credentials@v1
with:
aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
aws-region: us-east-1
- name: Sync artifacts to S3
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
run: |
aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-tester --delete --acl public-read --cache-control max-age=0,no-cache
export-electronics-chainlink-base:
name: Export Electronics (Chainlink Base)
runs-on: ubuntu-20.04
steps:
- name: Checkout code
uses: actions/checkout@v2
- name: Set up outputs directory
run: mkdir -p electronics/build/outputs
- name: Install dependencies
run: ./electronics/scripts/dependencies.sh
# Chainlink Base:
- name: Export schematic [chainlinkBase]
run: |
./electronics/scripts/export_schematic.py electronics/chainlinkBase/chainlinkBase.sch
cp electronics/build/chainlinkBase.pdf electronics/build/outputs/chainlinkBase-schematic.pdf
cp electronics/build/chainlinkBase-0.png electronics/build/outputs/chainlinkBase-schematic.png
env:
PYTHONUNBUFFERED: 1
- name: Render PCB 3D [chainlinkBase]
run: |
./electronics/scripts/export_3d.py electronics/chainlinkBase/chainlinkBase.kicad_pcb --width 1000 --height 1500 transform z+ z+ mu rx+ rx+ ry- ry- rz-
cp electronics/build/chainlinkBase-3d.png electronics/build/outputs/chainlinkBase-3d.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkBase-3d.png
env:
PYTHONUNBUFFERED: 1
- name: Export JLCPCB fabrication files [chainlinkBase]
run: |
./electronics/scripts/export_jlcpcb.py electronics/chainlinkBase/chainlinkBase.kicad_pcb
cp -r electronics/build/chainlinkBase-jlc electronics/build/outputs
- name: Export PCB overview PDF [chainlinkBase]
run: |
./electronics/scripts/generate_pdf.py electronics/chainlinkBase/chainlinkBase.kicad_pcb
cp electronics/build/chainlinkBase-pcb-packet.pdf electronics/build/outputs/chainlinkBase-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
- name: Export PCB SVG [chainlinkBase]
run: |
./electronics/scripts/generate_svg.py electronics/chainlinkBase/chainlinkBase.kicad_pcb
cp electronics/build/chainlinkBase_merged.png electronics/build/outputs/chainlinkBase-pcb-raster.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkBase-pcb-raster.png
env:
PYTHONUNBUFFERED: 1
# Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
- name: Export BOM [chainlinkBase]
uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e
with:
config: electronics/chainlinkBase/chainlinkBase.kibot.yml
dir: electronics/build
schema: 'electronics/chainlinkBase/chainlinkBase.sch'
board: 'electronics/chainlinkBase/chainlinkBase.kicad_pcb'
- name: Copy BOM outputs
run: cp -r electronics/build/bom electronics/build/outputs
- name: Archive artifacts
uses: actions/upload-artifact@v4
if: always()
with:
name: electronics-chainlink-base
path: |
electronics/build
- name: Configure AWS Credentials
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
uses: aws-actions/configure-aws-credentials@v1
with:
aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
aws-region: us-east-1
- name: Sync artifacts to S3
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
run: |
aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-base --delete --acl public-read --cache-control max-age=0,no-cache
export-electronics-chainlink-buddy-t-display:
name: Export Electronics (Chainlink Buddy T-Display)
runs-on: ubuntu-20.04
steps:
- name: Checkout code
uses: actions/checkout@v2
- name: Set up outputs directory
run: mkdir -p electronics/build/outputs
- name: Install dependencies
run: ./electronics/scripts/dependencies.sh
- name: Export schematic [chainlinkBuddyTDisplay]
run: |
./electronics/scripts/export_schematic.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.sch
cp electronics/build/chainlinkBuddyTDisplay.pdf electronics/build/outputs/chainlinkBuddyTDisplay-schematic.pdf
cp electronics/build/chainlinkBuddyTDisplay.png electronics/build/outputs/chainlinkBuddyTDisplay-schematic.png
env:
PYTHONUNBUFFERED: 1
- name: Render PCB 3D [chainlinkBuddyTDisplay]
run: |
./electronics/scripts/export_3d.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ mr mr mr rx+ rx+ ry- ry- rz-
cp electronics/build/chainlinkBuddyTDisplay-3d.png electronics/build/outputs/chainlinkBuddyTDisplay-3d.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-3d.png
env:
PYTHONUNBUFFERED: 1
- name: Export JLCPCB fabrication files [chainlinkBuddyTDisplay]
run: |
./electronics/scripts/export_jlcpcb.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb
cp -r electronics/build/chainlinkBuddyTDisplay-jlc electronics/build/outputs
- name: Export PCB overview PDF [chainlinkBuddyTDisplay]
run: |
./electronics/scripts/generate_pdf.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb
cp electronics/build/chainlinkBuddyTDisplay-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyTDisplay-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
- name: Export PCB SVG [chainlinkBuddyTDisplay]
run: |
./electronics/scripts/generate_svg.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb
cp electronics/build/chainlinkBuddyTDisplay_merged.png electronics/build/outputs/chainlinkBuddyTDisplay-pcb-raster.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-pcb-raster.png
env:
PYTHONUNBUFFERED: 1
- name: Panelize
run: |
kikit panelize -p electronics/chainlinkBuddyTDisplay/kikit_panelize.json electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb
- name: Export panelized PCB SVG
run: |
./electronics/scripts/generate_svg.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb
cp electronics/build/panelized_chainlinkBuddyTDisplay_merged.png electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-raster.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-raster.png
env:
PYTHONUNBUFFERED: 1
- name: Export panelized PCB fabrication files
run: |
./electronics/scripts/export_jlcpcb.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb
cp -r electronics/build/panelized_chainlinkBuddyTDisplay-jlc electronics/build/outputs/chainlinkBuddyTDisplay-panelized-jlc
- name: Export panelized PCB overview PDF
run: |
./electronics/scripts/generate_pdf.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb
cp electronics/build/panelized_chainlinkBuddyTDisplay-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
# Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
- name: Export BOM [chainlinkBuddyTDisplay]
uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e
with:
config: electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kibot.yml
dir: electronics/build
schema: 'electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.sch'
board: 'electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb'
- name: Copy BOM outputs
run: cp -r electronics/build/bom electronics/build/outputs
- name: Archive artifacts
uses: actions/upload-artifact@v4
if: always()
with:
name: electronics-chainlink-buddy-t-display
path: |
electronics/build
- name: Configure AWS Credentials
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
uses: aws-actions/configure-aws-credentials@v1
with:
aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
aws-region: us-east-1
- name: Sync artifacts to S3
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
run: |
aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-buddy-t-display --delete --acl public-read --cache-control max-age=0,no-cache
export-electronics-chainlink-buddy-breadboard:
name: Export Electronics (Chainlink Buddy Breadboard)
runs-on: ubuntu-20.04
steps:
- name: Checkout code
uses: actions/checkout@v2
- name: Set up outputs directory
run: mkdir -p electronics/build/outputs
- name: Install dependencies
run: ./electronics/scripts/dependencies.sh
- name: Export schematic [chainlinkBuddyBreadboard]
run: |
./electronics/scripts/export_schematic.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.sch
cp electronics/build/chainlinkBuddyBreadboard.pdf electronics/build/outputs/chainlinkBuddyBreadboard-schematic.pdf
cp electronics/build/chainlinkBuddyBreadboard.png electronics/build/outputs/chainlinkBuddyBreadboard-schematic.png
env:
PYTHONUNBUFFERED: 1
- name: Render PCB 3D [chainlinkBuddyBreadboard]
run: |
./electronics/scripts/export_3d.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ mu rx+ rx+ rx+ rx+ ry+ ry+ ry+ rz+ rz+
cp electronics/build/chainlinkBuddyBreadboard-3d.png electronics/build/outputs/chainlinkBuddyBreadboard-3d.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-3d.png
env:
PYTHONUNBUFFERED: 1
- name: Export JLCPCB fabrication files [chainlinkBuddyBreadboard]
run: |
./electronics/scripts/export_jlcpcb.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb
cp -r electronics/build/chainlinkBuddyBreadboard-jlc electronics/build/outputs
- name: Export PCB overview PDF [chainlinkBuddyBreadboard]
run: |
./electronics/scripts/generate_pdf.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb
cp electronics/build/chainlinkBuddyBreadboard-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyBreadboard-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
- name: Export PCB SVG [chainlinkBuddyBreadboard]
run: |
./electronics/scripts/generate_svg.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb
cp electronics/build/chainlinkBuddyBreadboard_merged.png electronics/build/outputs/chainlinkBuddyBreadboard-pcb-raster.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-pcb-raster.png
env:
PYTHONUNBUFFERED: 1
- name: Panelize
run: |
kikit panelize -p electronics/chainlinkBuddyBreadboard/kikit_panelize.json electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb
- name: Export panelized PCB SVG
run: |
./electronics/scripts/generate_svg.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb
cp electronics/build/panelized_chainlinkBuddyBreadboard_merged.png electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-raster.png
./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-raster.png
env:
PYTHONUNBUFFERED: 1
- name: Export panelized PCB fabrication files
run: |
./electronics/scripts/export_jlcpcb.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb
cp -r electronics/build/panelized_chainlinkBuddyBreadboard-jlc electronics/build/outputs/chainlinkBuddyBreadboard-panelized-jlc
- name: Export panelized PCB overview PDF
run: |
./electronics/scripts/generate_pdf.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb
cp electronics/build/panelized_chainlinkBuddyBreadboard-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-packet.pdf
env:
PYTHONUNBUFFERED: 1
# Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
- name: Export BOM [chainlinkBuddyBreadboard]
uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e
with:
config: electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kibot.yml
dir: electronics/build
schema: 'electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.sch'
board: 'electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb'
- name: Copy BOM outputs
run: cp -r electronics/build/bom electronics/build/outputs
- name: Archive artifacts
uses: actions/upload-artifact@v4
if: always()
with:
name: electronics-chainlink-buddy-breadboard
path: |
electronics/build
- name: Configure AWS Credentials
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
uses: aws-actions/configure-aws-credentials@v1
with:
aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
aws-region: us-east-1
- name: Sync artifacts to S3
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
run: |
aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-buddy-breadboard --delete --acl public-read --cache-control max-age=0,no-cache