- The beagleboard foorprint (U103) consists of 3 separate footprints:
  1 2x14way 2.54mm header and 2 2x10way 1.27mm headers.

- The 2x14 way 2.54mm header in the beagleboard footprint (U103) consists
  of two separate 2x4 way headers mounted at either end leaving 2x6 holes
  unpopulated inbetween them.

- The 2x4 way headers mentioned above are to be mounted with the long pins
  into the board giving the same overall height above the board as the 2x10
  1.27mm headers.

- The silk on the board for the PLCC2 LEDs does not indicate the polarity.
  Refer to the silk layer in the gerbers to check the polarity, the notch
  on the corner of the silk corresponds with the notch on the corner of
  the LED.

- The XYRS file does not have correct rotations for components which are
  non-orthogonal. There are 5 components which are non-orthogonal:
  R104, C108, C110, U102 & U104