Add YLXD62YI (yeelight.light.ceiling24) support

README.md

@@ -38,6 +38,7 @@ Esphome custom firmware for some Yeelight Ceiling Lights.
 | Yeelight Ceiling Light 235C                      | yeelight.light.ceil20     | YLXDD-0030  | AC220V, 18W, 1200lm, 2700K-6500K, RGB ambient light |
 | Yeelight Ceiling Light 300C                      | yeelight.light.ceil20     | YLXDD-0033  | AC220V, 21W, 1600lm, 2700K-6500K, RGB ambient light |
 | Yeelight Ceiling Light 400C                      | yeelight.light.ceil20     | YLXDD-0034  | AC220V, 24W, 2000lm, 2700K-6500K, RGB ambient light |
+| Yeelight Jiaoyue 260 Ceiling Light               | yeelight.light.ceiling24  | YLXD62YI    | AC220V, 10W, 670LM, 2700K-6500K, 26cm |
 
 ### More esphome + yeelight projects
 
@@ -112,6 +113,16 @@ Esphome custom firmware for some Yeelight Ceiling Lights.
 - Light strip (RGB)
   - Brightness
   - Color
+
+### yeelink.light.ceiling24
+
+- Light (CCWW)
+  - Brightness
+  - Color temperature (2700K-6500K)
+- Sensor
+  - ADC1
+  - ADC2
+
 
 ## Known bugs
 
@@ -322,6 +333,22 @@ The ESP32 will enter the serial bootloader when GPIO0 (test point IO0 at the bac
 | 3.3V                | +, TP7          | 3.3V         |                       |
 | GND                 | -, TP8          | GND          |                       |
 
+### yeelink.light.ceiling24
+
+| Name                | Label  | ESP32 GPIO   | Stock firmware limits |
+| ------------------- | ------ | ------------ |-----------------------|
+| Warm white PWM      |        | GPIO19       |                       |
+| Cold white PWM      |        | GPIO21       |                       |
+| VCC measurement     |        | GPIO36       |                       |
+| VCC measurement     |        | GPIO32       |                       |
+| TXD                 | TXD    | GPIO1        |                       |
+| RXD                 | RXD    | GPIO3        |                       |
+| GPIO0               | IO0    | GPIO0        |                       |
+| 3.3V                | 3.3V   | 3.3V         |                       |
+| GND                 | GND    | GND          |                       |
+
+The ESP32 will enter the serial bootloader when GPIO0 (IO0 pad) is held low (GND) on reset / power.
+
 
 ## Disassembly
 
@@ -644,3 +671,27 @@ When flashing the YLXDD-00xx series you'll need an external 3.3V power supply an
 <a href="https://raw.githubusercontent.com/syssi/esphome-yeelight-ceiling-light/main/images/ylxdd0033/004.webp" target="_blank">
 <img src="https://raw.githubusercontent.com/syssi/esphome-yeelight-ceiling-light/main/images/ylxdd0033/thumbnails/004.webp" width="18%">
 </a>
+
+### YLXD62YI
+Rotate the cover counterclockwise to remove the cover. Unscrew the 220VAC L and N Wires. Remove three screws on the transparent diffusor.
+Now the PCB is completely exposed and unmounted from the base. 
+3.3V, GND, TXD, RXD and IO0 Pads are clearly visible on the main PCB near ESP32 board.
+To flash ESP32 you need to solder the wires onto that test points.
+
+
+<a href="https://raw.githubusercontent.com/justr0st/esphome-yeelight-ceiling-light/main/images/ylxd62yi/001.jpg" target="_blank">
+<img src="https://raw.githubusercontent.com/justr0st/esphome-yeelight-ceiling-light/main/images/ylxd62yi/thumbnails/001.jpg" width="18%">
+</a>
+
+<a href="https://raw.githubusercontent.com/justr0st/esphome-yeelight-ceiling-light/main/images/ylxd62yi/002.jpg" target="_blank">
+<img src="https://raw.githubusercontent.com/justr0st/esphome-yeelight-ceiling-light/main/images/ylxd62yi/thumbnails/002.jpg" width="18%">
+</a>
+
+<a href="https://raw.githubusercontent.com/justr0st/esphome-yeelight-ceiling-light/main/images/ylxd62yi/003.jpg" target="_blank">
+<img src="https://raw.githubusercontent.com/justr0st/esphome-yeelight-ceiling-light/main/images/ylxd62yi/thumbnails/003.jpg" width="18%">
+</a>
+
+<a href="https://raw.githubusercontent.com/justr0st/esphome-yeelight-ceiling-light/main/images/ylxd62yi/004.jpg" target="_blank">
+<img src="https://raw.githubusercontent.com/justr0st/esphome-yeelight-ceiling-light/main/images/ylxd62yi/thumbnails/004.jpg" width="18%">
+</a>
+

yeelight_light_ceiling24.yaml

@@ -0,0 +1,60 @@
+# configuration based on:
+# - https://github.com/syssi/esphome-yeelight-ceiling-light/blob/main/yeelight_light_ceiling15.yaml
+
+substitutions:
+  name: yeelight-light-ceiling24
+
+esphome:
+  name: ${name}
+  min_version: 2024.6.0
+
+esp32:
+  board: esp32doit-devkit-v1
+  framework:
+    type: esp-idf
+    sdkconfig_options:
+      CONFIG_FREERTOS_UNICORE: y
+    advanced:
+      ignore_efuse_mac_crc: true
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+ota:
+  platform: esphome
+
+logger:
+  level: DEBUG
+
+api:
+
+sensor:
+  - platform: adc
+    pin: GPIO32
+    name: "${name} adc1"
+    attenuation: 12db
+  - platform: adc
+    pin: GPIO33
+    name: "${name} adc2"
+    attenuation: 12db
+
+output:
+  - platform: ledc
+    pin: GPIO19
+    id: output_warm
+  - platform: ledc
+    pin: GPIO21
+    id: output_cold
+
+light:
+  - platform: cwww
+    name: "${name} ceiling light"
+    id: ceiling_light
+    cold_white: output_cold
+    warm_white: output_warm
+    cold_white_color_temperature: 6500 K
+    warm_white_color_temperature: 2700 K
+    # disabling constant_brightness makes color temperature transition smooth without brightness dips
+    # constant_brightness: true
+    gamma_correct: 0