beagleboard module

This beagleboard module implements a BeagleBoard BeagleBone AI 64 using the rdk:component:board API.

Setup

Follow the setup guide to prepare your BeagleBone for running viam-server before configuring a beaglebone board.

Configure your beaglebone board

Note

Before configuring your board, you must create a machine.

Navigate to the CONFIGURE tab of your machine in the Viam app. Add board / beagleboard:beaglebone to your machine.

Attributes

The following attributes are available for viam:beagleboard:beaglebone boards:

Attribute	Type	Required?	Description
digital_interrupts	object	Optional	Any digital interrupts's pin number and name.

For instructions on implementing digital interrupts, see Digital interrupt configuration.

Example configuration

viam:beagleboard:beaglebone

  {
     "name": "<your-beagleboard-beaglebone-board-name>",
      "model": "viam:beagleboard:beaglebone",
      "type": "board",
      "namespace": "rdk",
      "attributes": {
      },
      "depends_on": []
  }

Next Steps

• To test your board, expand the TEST section of its configuration pane or go to the CONTROL tab.
• To write code against your board, use one of the available SDKs.
• To view examples using a board component, explore these tutorials.

Digital interrupt configuration

Interrupts are a method of signaling precise state changes. Configuring digital interrupts to monitor GPIO pins on your board is useful when your application needs to know precisely when there is a change in GPIO value between high and low.

• When an interrupt configured on your board processes a change in the state of the GPIO pin it is configured to monitor, it ticks to record the state change. You can stream these ticks with the board API's StreamTicks(), or get the current value of the digital interrupt with Value().
• Calling GetGPIO() on a GPIO pin, which you can do without configuring interrupts, is useful when you want to know a pin's value at specific points in your program, but is less precise and convenient than using an interrupt.

Integrate digital_interrupts into your machine in the attributes of your board by adding the following to your board's attributes configuration:

{
  "digital_interrupts": [
    {
      "name": "<your-digital-interrupt-name>",
      "pin": "<your-digital-interrupt-pin-number>"
    }
  ]
}

Attributes

The following attributes are available for digital_interrupts:

Name	Type	Required?	Description
name	string	Required	Your name for the digital interrupt.
pin	string	Required	The pin number of the board's GPIO pin that you wish to configure the digital interrupt for.

Example configuration

{
  "components": [
    {
      "name": "<your-beagleboard-beaglebone-board-name>",
      "model": "viam:beagleboard:beaglebone",
      "type": "board",
      "namespace": "rdk",
      "attributes": {
        "digital_interrupts": [
          {
            "name": "your-interrupt-1",
            "pin": "15"
          },
          {
            "name": "your-interrupt-2",
            "pin": "16"
          }
        ]
      }
    }
  ]
}