Distributed CLI runner on AWS CodeBuild. This is a wrapper for handling CodeBuild container more easily.
$ gem install drunker
All you need to use Drunker is the Docker image name of the container you want to use and the command you want to execute (Of course, AWS credentials is also necessary). For example, you can run RSpec on CodeBuild with the following command.
$ bundle install --path=vendor/bundle
$ drunker run --env=BUNDLE_PATH:vendor/bundle/ruby/2.4.0 --timeout=5 ruby:2.4.1 bundle exec rspec
First, specify the Docker image name, and then the command you want to execute. After that, Drunker archives files under the current directory and uploads it to S3 and creates a CodeBuild project and the required IAM role.
When preparation is completed, run builds, download artifacts from S3, and display it on your terminal. Resources created by Drunker are automatically deleted. Also, in this example, timeout and environment variables used inside containers are specified by options.
You can see execution result (e.g. STDOUT, STDERR and exit status) from output like the following.
-------------------------------------------------------------------------------------------
BUILD_ID: drunker-executor-1494139943:10c9c785-bae0-4a2d-b5eb-927528943626
RESULT: SUCCESS
STDOUT: .....................................................................................................................................
Finished in 5.9 seconds (files took 0.17053 seconds to load)
133 examples, 0 failures
STDERR:
EXIT_STATUS: 0
-------------------------------------------------------------------------------------------
The essence of Drunker is parallel build. For example, if you want to run RSpec in parallel, you can do it easily with the following command.
$ drunker run --concurrency=3 --file-pattern="spec/**/*_spec.rb" --env=BUNDLE_PATH:vendor/bundle/ruby/2.4.0 --timeout=5 ruby:2.4.1 bundle exec rspec FILES
FILES included in the execution command has a special meaning. This is interpolated into the list of filenames according to the number of parallels. For example, in this case, it will be the following command (filename changes for each build):
$ bundle exec rspec spec/aggregator_spec.rb spec/artifact_spec.rb ...
The target file is all files matching the glob pattern **/*. However, you can change this with --file-pattern option. You can see the execution result as the following:
-------------------------------------------------------------------------------------------
BUILD_ID: drunker-executor-1494140968:59c0b89f-099e-482c-8995-659f8b6b8523
RESULT: SUCCESS
STDOUT: ................
Finished in 0.12019 seconds (files took 0.14562 seconds to load)
16 examples, 0 failures
STDERR:
EXIT_STATUS: 0
-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------
BUILD_ID: drunker-executor-1494140968:f6cb0396-3005-44ca-8221-33b29cbbd309
RESULT: SUCCESS
STDOUT: ..........................................................................
Finished in 0.15774 seconds (files took 0.19026 seconds to load)
74 examples, 0 failures
STDERR:
EXIT_STATUS: 0
-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------
BUILD_ID: drunker-executor-1494140968:620c471e-19e7-48da-95e7-42cd66728455
RESULT: SUCCESS
STDOUT: ...........................................
Finished in 5.56 seconds (files took 0.14991 seconds to load)
43 examples, 0 failures
STDERR:
EXIT_STATUS: 0
-------------------------------------------------------------------------------------------
What is surprising is that do not require your local machine specs at all even if you increase the number of parallels. You can increase the number of parallels within the bounds of common sense.
The number of parallelism of CodeBuild is determined by default. If the limit is reached, Drunker queues remaining builders.
INFO: Maximum number of concurrent running builds has been reached. it will retry later...
INFO: Waiting builder: 1/25, queues: 4
...
For details about limitation, please see here.
Do you want to use private images? You can also specify the image of EC2 Container Registry. Following example:
$ drunker run account-ID.dkr.ecr.us-east-1.amazonaws.com/your-Amazon-ECR-repo-name:latest ruby task.rb
For details, please see Amazon ECR Sample for AWS CodeBuild.
Please show drunker help run
Usage:
drunker run [IMAGE] [COMMAND]
Options:
[--config=CONFIG] # Location of config file
# Default: .drunker.yml
[--concurrency=N] # Build concurrency
# Default: 1
[--compute-type=COMPUTE_TYPE] # Container compute type
# Default: small
# Possible values: small, medium, large
[--timeout=N] # Build timeout in minutes, should be between 5 and 480
# Default: 60
[--env=key:value] # Environment variables in containers
[--buildspec=BUILDSPEC] # Location of custom buildspec
[--file-pattern=FILE_PATTERN] # FILES target file pattern, can use glob to specify, but files beginning with a dot are ignored.
# Default: **/*
[--aggregator=AGGREGATOR] # Aggregator name. If you want to use custom aggregator, please install that beforehand.
[--loglevel=LOGLEVEL] # Output log level
# Default: info
# Possible values: debug, info, warn, error, fatal
[--debug], [--no-debug] # Enable debug mode. This mode does not delete the AWS resources created by Drunker
[--access-key=ACCESS_KEY] # AWS access key token used by Drunker
[--secret-key=SECRET_KEY] # AWS secret key token used by Drunker
[--region=REGION] # AWS region in which resources is created by Drunker
[--profile-name=PROFILE_NAME] # AWS shared credentials profile name used by Drunker
Run a command on CodeBuild
By default, it loads .drunker.yml. In the configuration file, many options can be written in advance. Following example:
concurrency: 10
compute_type: medium
timeout: 5
file_pattern: spec/**/*_spec.rb
environment_variables:
RAILS_ENV: test
SECRET_KEY_BASE: super secret
aws_credentials:
access_key: AWS_ACCESS_KEY_ID
secret_key: AWS_SECRET_ACCESS_KEY
region: us-east-1If you want to create a configuration file with a different name, specify the file name with --config option.
$ drunker run --config=.custom_drunker.yml ruby:2.4.1 bundle exec rspec
Drunker supports various credential providers. It is used with the following priority:
- Specified shared credentials
- Static credentials
- Environment credentials
- Default shared credentials
If you have access key and secret key, you can specify these credentials.
$ drunker run --access-key=AWS_ACCESS_KEY_ID --secret-key=AWS_SECRET_ACCESS_KEY --region=us-east-1 owner_name/image_name ruby task.rb
aws_credentials:
access_key: AWS_ACCESS_KEY_ID
secret_key: AWS_SECRET_ACCESS_KEY
region: us-east-1If you have shared credentials, you can specify credentials profile name. However Drunker supports only ~/.aws/credentials as shared credentials location.
$ drunker run --profile-name=PROFILE_NAME --region=us-east-1 owner_name/image_name ruby task.rb
aws_credentials:
profile_name: PROFILE_NAME
region: us-east-1Do you want to customize the build specification more? You can change the buildspec.yml that is used by Drunker. The default buildspec.yml is here. For example, if you want to run bundle install in the install phase, create the custom_buildspec.yml like the following.
version: 0.1
phases:
install:
commands:
- bundle install
build:
commands:
- <%= commands.join(" ") %> 1> <%= stdout %> 2> <%= stderr %>; echo $? > <%= exit_status %>
artifacts:
files:
- <%= stdout %>
- <%= stderr %>
- <%= exit_status %>Actual commands and output files are interpolated by ERB. Please see here for how to write buildspec.yml. After that, specify the file path with the --buildspec option.
$ drunker run --buildspec=custom_buildspec.yml owner_name/image_name ruby task.rb
Also, you can specify it in the configuration file.
buildspec: custom_buildspec.ymlIn configuration file, you can also be described inline style.
buildspec:
version: 0.1
phases:
install:
commands:
- bundle install
build:
commands:
- <%= commands.join(" ") %> 1> <%= stdout %> 2> <%= stderr %>; echo $? > <%= exit_status %>
artifacts:
files:
- <%= stdout %>
- <%= stderr %>
- <%= exit_status %>Do you want to customize the output format? You can customize output format, exit code by creating Gem called aggregator. The specifications that the aggregator must satisfy are the following five.
- The name of Gem must be
drunker-aggregator-#{name}. - Create
lib/drunker-aggregator-#{name}.rb, and requireDrunker::Aggregator::#{name}class Drunker::Aggregator::#{name}must inheritDrunker::Aggregator::Base- Implement
runandexit_statusmethods to receive array ofDrunker::Artifact::Layer - Return a number in
exit_statusmethod
Drunker::Artifact::Layer has outputs and build ID for each build. Please see the implementation for details.
For example, this aggregator can aggregate for PHPMD XML format report.
After checking out the repo, run bin/setup to install dependencies. Then, run rake spec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.
To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.
Bug reports and pull requests are welcome on GitHub at https://github.com/wata727/drunker. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the Contributor Covenant code of conduct.
The gem is available as open source under the terms of the MIT License.