mkosi - Create legacy-free OS images

A fancy wrapper around dnf --installroot, debootstrap and pacstrap, that may generate disk images with a number of bells and whistles.

Supported output formats

The following output formats are supported:

• Raw GPT disk image, with ext4 as root (raw_gpt)

• Raw GPT disk image, with btrfs as root (raw_btrfs)

• Plain directory, containing the OS tree (directory)

• btrfs subvolume, with separate subvolumes for /var, /home, /srv, /var/tmp (subvolume)

• Tarball (tar)

When a GPT disk image is created, the following additional options are available:

• A swap partition may be added in

• The image may be made bootable on EFI systems

• Separate partitions for /srv and /home may be added in

Compatibility

Generated images are legacy-free. This means only GPT disk labels (and no MBR disk labels) are supported, and only systemd based images may be generated. Moreover, for bootable images only EFI systems are supported (not plain MBR/BIOS).

Currently, the EFI boot loader does not support SecureBoot, and hence cannot generate signed SecureBoot images.

All generated GPT disk images may be booted in a local container directly with:

systemd-nspawn -bi image.raw

Additionally, bootable GPT disk images (as created with the --bootable flag) work when booted directly by EFI systems, for example in KVM via:

qemu-kvm -m 512 -smp 2 -bios /usr/share/edk2/ovmf/OVMF_CODE.fd -hda image.raw

EFI bootable GPT images are larger than plain GPT images, as they additionally carry an EFI system partition containing a boot loader, as well as a kernel, kernel modules, udev and more.

All directory or btrfs subvolume images may be booted directly with:

systemd-nspawn -bD image

Other features

• Optionally, create an SHA256SUM checksum file for the result, possibly even signed via gpg.

• Optionally, place a specific .nspawn settings file along with the result.

• Optionally, build a local project's source tree in the image and add the result to the generated image (see below).

• Optionally, share RPM package cache between multiple runs, in order to optimize build speeds.

• Optionally, the resulting image may be compressed with XZ.

• Optionally, btrfs' read-only flag for the root subvolume may be set.

• Optionally, btrfs' compression may be enabled for all created subvolumes.

• By default images are created without all files marked as documentation in the packages, on distributions where the package manager supports this. Use the --with-docs flag to build an image with docs added.

Supported distributions

Images may be created containing installations of the following OSes.

• Fedora

• Debian

• Ubuntu

• Arch Linux (incomplete)

In theory, any distribution may be used on the host for building images containing any other distribution, as long as the necessary tools are available. Specifically, any distro that packages debootstrap may be used to build Debian or Ubuntu images. Any distro that packages dnf may be used to build Fedora images. Any distro that packages pacstrap may be used to build Arch Linux images.

Currently, Fedora packages all three tools.

Files

To make it easy to build images for development versions of your projects, mkosi can read configuration data from the local directory, under the assumption that it is invoked from a source tree. Specifically, the following files are used if they exist in the local directory:

• mkosi.default may be used to configure mkosi's image building process. For example, you may configure the distribution to use (fedora, ubuntu, debian, archlinux) for the image, or additional distribution packages to install. Note that all options encoded in this configuration file may also be set on the command line, and this file is hence little more than a way to make sure simply typing mkosi without further parameters in your source tree is enough to get the right image of your choice set up.

• mkosi.extra may be a directory. If this exists all files contained in it are copied over the directory tree of the image after the OS was installed. This may be used to add in additional files to an image, on top of what the distribution includes in its packages.

• mkosi.build may be an executable script. If it exists the image will be built twice: the first iteration will be the development image, the second iteration will be the final image. The development image is used to build the project in the current working directory (the source tree). For that the whole directory is copied into the image, along with the mkosi.build build script. The script is then invoked inside the image (via systemd-nspawn), with $SRCDIR pointing to the source tree. $DESTDIR points to a directory where the script should place any files generated it would like to end up in the final image. Note that make/automake based build systems generally honour $DESTDIR, thus making it very natural to build source trees from the build script. After the development image was built and the build script ran inside of it, it is removed again. After that the final image is built, without any source tree or build script copied in. However, this time the contents of $DESTDIR is added into the image.

• mkosi.nspawn may be an nspawn settings file. If this exists it will be copied into the same place as the output image file. This is useful since nspawn looks for settings files next to image files it boots, for additional container runtime settings.

All these files are optional.

Note that the location of all these files may also be configured during invocation via command line switches, and as settings in mkosi.default, in case the default settings are not acceptable for a project.

Examples

Create and run a raw GPT image with ext4, as image.raw:

# mkosi
# systemd-nspawn -b -i image.raw

Create and run a bootable btrfs GPT image, as foobar.raw:

# mkosi -F raw_btrfs --bootable -o foobar.raw
# systemd-nspawn -b -i foobar.raw
# qemu-kvm -m 512 -smp 2 -bios /usr/share/edk2/ovmf/OVMF_CODE.fd -hda foobar.raw

Create and run a Fedora image into a plain directory:

# mkosi -F directory -o quux
# systemd-nspawn -b quux

Create a compressed tar ball image.raw.xz and add a checksum file, and install SSH into it:

# mkosi -d fedora -F tar --checksum --compress --package=openssh-clients

Inside the source directory of an automake-based project, configure mkosi so that simply invoking mkosi without any parameters builds an OS image containing a built version of the project in its current state:

# cat > mkosi.default <<EOF
[Distribution]
Distribution=fedora
Release=24

[Output]
Format=raw_btrfs
Bootable=yes

[Packages]
Packages=openssh-clients httpd
BuildPackages=make gcc libcurl-devel
EOF
# cat > mkosi.build <<EOF
#!/bin/sh
cd $SRCDIR <<EOF
./autogen.sh
./configure --prefix=/usr
make -j `nproc`
make install
EOF
# chmod +x mkosi.build
# mkosi
# systemd-nspawn -bi image.raw

Requirements

To use this on Fedora, you need:

dnf install python3 debootstrap arch-install-scripts xz btrfs-progs dosfstools

This should work on other distributions too, as long as the same dependencies are available, but it's untested.